[v2,3/4] clk: imx: fracn-gppll: correct PLL initialization flow

Commit Message

Peng Fan (OSS) Oct. 18, 2024, 10 a.m. UTC

From: Peng Fan <[e-mail]>

Per i.MX93 Reference Mannual 22.4 Initialization information
1. Program appropriate value of DIV[ODIV], DIV[RDIV] and DIV[MFI]
   as per Integer mode.
2. Wait for 5 μs.
3. Program the following field in CTRL register.
   Set CTRL[POWERUP] to 1'b1 to enable PLL block.
4. Poll PLL_STATUS[PLL_LOCK] register, and wait till PLL_STATUS[PLL_LOCK]
   is 1'b1 and pll_lock output signal is 1'b1.
5. Set CTRL[CLKMUX_EN] to 1'b1 to enable PLL output clock.

So move the CLKMUX_EN operation after PLL locked.

Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Co-developed-by: Jacky Bai <[e-mail]>
Signed-off-by: Jacky Bai <[e-mail]>
Signed-off-by: Peng Fan <[e-mail]>
---
 drivers/clk/imx/clk-fracn-gppll.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Patch

diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index 591e0364ee5c113859a7b6271c8c11e98a0e0ffc..4749c3e0b7051cf53876664808aa28742f6861f7 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -303,13 +303,13 @@  static int clk_fracn_gppll_prepare(struct clk_hw *hw)
 	val |= POWERUP_MASK;
 	writel_relaxed(val, pll->base + PLL_CTRL);
 
-	val |= CLKMUX_EN;
-	writel_relaxed(val, pll->base + PLL_CTRL);
-
 	ret = clk_fracn_gppll_wait_lock(pll);
 	if (ret)
 		return ret;
 
+	val |= CLKMUX_EN;
+	writel_relaxed(val, pll->base + PLL_CTRL);
+
 	val &= ~CLKMUX_BYPASS;
 	writel_relaxed(val, pll->base + PLL_CTRL);