@@ -116,6 +116,16 @@ &i2c2 {
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+ accelerometer@19 {
+ compatible = "st,lis2de12";
+ reg = <0x19>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_accel>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ st,drdy-int-pin = <1>;
+ };
+
eeprom@52 {
compatible = "atmel,24c32";
reg = <0x52>;
@@ -198,6 +208,12 @@ MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000040 /* GPIOC */
>;
};
+ pinctrl_accel: accelgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x159
+ >;
+ };
+
pinctrl_gpio_leds: gpioledgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x6 /* LEDG */
@@ -104,6 +104,16 @@ &i2c2 {
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+ accelerometer@19 {
+ compatible = "st,lis2de12";
+ reg = <0x19>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_accel>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ st,drdy-int-pin = <1>;
+ };
+
eeprom@52 {
compatible = "atmel,24c32";
reg = <0x52>;
@@ -204,6 +214,12 @@ MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x40000106 /* PCI_WDIS# */
>;
};
+ pinctrl_accel: accelgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08 0x159
+ >;
+ };
+
pinctrl_gpio_leds: gpioledgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x6 /* LEDG */
The GW75xx has a LIS2DE12TR 3-axis accelerometer on the I2C bus with an interrupt pin. Add it to the device-tree. Signed-off-by: Tim Harvey <tharvey@gateworks.com> ---- v3: move reg directly after compatible and before pinctrl v2: make sure compatible is on top and vendor specific props are at the end per: https://docs.kernel.org/devicetree/bindings/dts-coding-style.html --- .../boot/dts/freescale/imx8mm-venice-gw75xx.dtsi | 16 ++++++++++++++++ .../boot/dts/freescale/imx8mp-venice-gw75xx.dtsi | 16 ++++++++++++++++ 2 files changed, 32 insertions(+)