Message ID | 20241025010855.1593365-1-festevam@gmail.com (mailing list archive) |
---|---|
State | In Next, archived |
Headers | show |
Series | [1/3] ARM: dts: imx6sll: Remove regulator-3p0 unit address | expand |
On Thu, Oct 24, 2024 at 10:08:53PM -0300, Fabio Estevam wrote: > From: Fabio Estevam <festevam@denx.de> > > According to imx-thermal.yaml, the anatop regulators should not > contain unit-address/reg entries. > > Change it accordingly. > > Signed-off-by: Fabio Estevam <festevam@denx.de> Applied all, thanks!
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi index 85fe2a4ab97a..0fc22c03ccea 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi @@ -507,12 +507,9 @@ anatop: anatop@20c8000 { interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - reg_3p0: regulator-3p0@20c8120 { + reg_3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; - reg = <0x20c8120>; regulator-name = "vdd3p0"; regulator-min-microvolt = <2625000>; regulator-max-microvolt = <3400000>;