diff mbox series

[net-next,v7,08/15] net: dwmac-rk: Use helper rgmii_clock

Message ID 20241202-upstream_s32cc_gmac-v7-8-bc3e1f9f656e@oss.nxp.com (mailing list archive)
State Superseded
Headers show
Series Add support for Synopsis DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45 | expand

Commit Message

Jan Petrous via B4 Relay Dec. 2, 2024, 10:03 p.m. UTC 
From: "Jan Petrous (OSS)" <jan.petrous@oss.nxp.com>

Utilize a new helper function rgmii_clock().

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 30 ++++++--------------------
 1 file changed, 6 insertions(+), 24 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 8cb374668b74..a4dc89e23a68 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -1079,20 +1079,11 @@  static void rk3568_set_gmac_speed(struct rk_priv_data *bsp_priv, int speed)
 {
 	struct clk *clk_mac_speed = bsp_priv->clks[RK_CLK_MAC_SPEED].clk;
 	struct device *dev = &bsp_priv->pdev->dev;
-	unsigned long rate;
+	long rate;
 	int ret;
 
-	switch (speed) {
-	case 10:
-		rate = 2500000;
-		break;
-	case 100:
-		rate = 25000000;
-		break;
-	case 1000:
-		rate = 125000000;
-		break;
-	default:
+	rate = rgmii_clock(speed);
+	if (rate < 0) {
 		dev_err(dev, "unknown speed value for GMAC speed=%d", speed);
 		return;
 	}
@@ -1540,20 +1531,11 @@  static void rv1126_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
 {
 	struct clk *clk_mac_speed = bsp_priv->clks[RK_CLK_MAC_SPEED].clk;
 	struct device *dev = &bsp_priv->pdev->dev;
-	unsigned long rate;
+	long rate;
 	int ret;
 
-	switch (speed) {
-	case 10:
-		rate = 2500000;
-		break;
-	case 100:
-		rate = 25000000;
-		break;
-	case 1000:
-		rate = 125000000;
-		break;
-	default:
+	rate = rgmii_clock(speed);
+	if (rate < 0) {
 		dev_err(dev, "unknown speed value for RGMII speed=%d", speed);
 		return;
 	}