| Message ID | 20241220123916.1452582-5-ciprianmarian.costea@oss.nxp.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | add I2C DTS support for S32G2/S32G3 SoCs | expand |
On Fri, Dec 20, 2024 at 02:39:16PM +0200, Ciprian Costea wrote: > From: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com> > > On S32G399A-RDB3 boards, an INA231 current sensor is connected over > I2C4 bus. Add INA231 current sensor for S32G399A-RDB3 boards. > > Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com> > --- > arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts > index 94f531be4017..5f8739c068c6 100644 > --- a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts > +++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts > @@ -40,6 +40,14 @@ &uart1 { > status = "okay"; > }; > > +&i2c4 { > + ina231@40 { Need use general node name: https://devicetree-specification.readthedocs.io/en/v0.3/devicetree-basics.html#node-names look like should be current-sensor Frank > + compatible = "ti,ina231"; > + reg = <0x40>; > + shunt-resistor = <1000>; > + }; > +}; > + > &usdhc0 { > pinctrl-names = "default", "state_100mhz", "state_200mhz"; > pinctrl-0 = <&pinctrl_usdhc0>; > -- > 2.45.2 >
diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts index 94f531be4017..5f8739c068c6 100644 --- a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts +++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts @@ -40,6 +40,14 @@ &uart1 { status = "okay"; }; +&i2c4 { + ina231@40 { + compatible = "ti,ina231"; + reg = <0x40>; + shunt-resistor = <1000>; + }; +}; + &usdhc0 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc0>;