diff mbox series

[3/4] gpio: mxc: remove dead code after switch to DT-only

Message ID 20250113-b4-imx-gpio-base-warning-v1-3-0a28731a5cf6@pengutronix.de (mailing list archive)
State New
Headers show
Series gpio: mxc: silence warning about GPIO base being statically allocated | expand

Commit Message

Ahmad Fatoum Jan. 13, 2025, 10:19 p.m. UTC
struct platform_device::id was only set by board code, but since i.MX
became a devicetree-only platform, this will always be -1
(PLATFORM_DEVID_NONE).

Note: of_alias_get_id() returns a negative number on error and base
treats all negative errors the same, so we need not add any additional
error handling.

Fixes: 0f2c7af45d7e ("gpio: mxc: Convert the driver to DT-only")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 drivers/gpio/gpio-mxc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

Comments

Andy Shevchenko Jan. 14, 2025, 9:51 a.m. UTC | #1
On Tue, Jan 14, 2025 at 12:19 AM Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
>
> struct platform_device::id was only set by board code, but since i.MX
> became a devicetree-only platform, this will always be -1
> (PLATFORM_DEVID_NONE).
>
> Note: of_alias_get_id() returns a negative number on error and base
> treats all negative errors the same, so we need not add any additional
> error handling.

This one is good,
Reviewed-by: Andy Shevchenko <andy@kernel.org>
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 4cb455b2bdee71ba4eb20c93567c3b8db100dbb2..619b6fb9d833a4bb94a93b4209f01b49ad1cbdb0 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -490,8 +490,7 @@  static int mxc_gpio_probe(struct platform_device *pdev)
 	port->gc.request = mxc_gpio_request;
 	port->gc.free = mxc_gpio_free;
 	port->gc.to_irq = mxc_gpio_to_irq;
-	port->gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 :
-					     pdev->id * 32;
+	port->gc.base = of_alias_get_id(np, "gpio") * 32;
 
 	err = devm_gpiochip_add_data(&pdev->dev, &port->gc, port);
 	if (err)