@@ -282,6 +282,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb
imx8mm-kontron-dl-dtbs := imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
new file mode 100644
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+/dts-v1/;
+
+#include "imx943.dtsi"
+
+/ {
+ compatible = "fsl,imx943-evk", "fsl,imx94";
+ model = "NXP i.MX943 EVK board";
+
+ aliases {
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ serial0 = &lpuart1;
+ };
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ off-on-delay-us = <12000>;
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VDD_SD2_3V3";
+ gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reserved-memory {
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ alloc-ranges = <0 0x80000000 0 0x7f000000>;
+ reusable;
+ size = <0 0x10000000>;
+ linux,cma-default;
+ };
+ };
+
+ memory@80000000 {
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ device_type = "memory";
+ };
+};
+
+&lpuart1 {
+ pinctrl-0 = <&pinctrl_uart1>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&scmi_iomuxc {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ IMX94_PAD_UART1_TXD__LPUART1_TX 0x31e
+ IMX94_PAD_UART1_RXD__LPUART1_RX 0x31e
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ IMX94_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ IMX94_PAD_SD1_CMD__USDHC1_CMD 0x138e
+ IMX94_PAD_SD1_DATA0__USDHC1_DATA0 0x138e
+ IMX94_PAD_SD1_DATA1__USDHC1_DATA1 0x138e
+ IMX94_PAD_SD1_DATA2__USDHC1_DATA2 0x138e
+ IMX94_PAD_SD1_DATA3__USDHC1_DATA3 0x138e
+ IMX94_PAD_SD1_DATA4__USDHC1_DATA4 0x138e
+ IMX94_PAD_SD1_DATA5__USDHC1_DATA5 0x138e
+ IMX94_PAD_SD1_DATA6__USDHC1_DATA6 0x138e
+ IMX94_PAD_SD1_DATA7__USDHC1_DATA7 0x138e
+ IMX94_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ IMX94_PAD_SD1_CLK__USDHC1_CLK 0x15fe
+ IMX94_PAD_SD1_CMD__USDHC1_CMD 0x13fe
+ IMX94_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe
+ IMX94_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe
+ IMX94_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe
+ IMX94_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe
+ IMX94_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe
+ IMX94_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe
+ IMX94_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe
+ IMX94_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe
+ IMX94_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ IMX94_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ IMX94_PAD_SD1_CMD__USDHC1_CMD 0x138e
+ IMX94_PAD_SD1_DATA0__USDHC1_DATA0 0x138e
+ IMX94_PAD_SD1_DATA1__USDHC1_DATA1 0x138e
+ IMX94_PAD_SD1_DATA2__USDHC1_DATA2 0x138e
+ IMX94_PAD_SD1_DATA3__USDHC1_DATA3 0x138e
+ IMX94_PAD_SD1_DATA4__USDHC1_DATA4 0x138e
+ IMX94_PAD_SD1_DATA5__USDHC1_DATA5 0x138e
+ IMX94_PAD_SD1_DATA6__USDHC1_DATA6 0x138e
+ IMX94_PAD_SD1_DATA7__USDHC1_DATA7 0x138e
+ IMX94_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ IMX94_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ IMX94_PAD_SD2_CMD__USDHC2_CMD 0x138e
+ IMX94_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
+ IMX94_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
+ IMX94_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
+ IMX94_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
+ IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ IMX94_PAD_SD2_CLK__USDHC2_CLK 0x15fe
+ IMX94_PAD_SD2_CMD__USDHC2_CMD 0x13fe
+ IMX94_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe
+ IMX94_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe
+ IMX94_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe
+ IMX94_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe
+ IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ IMX94_PAD_SD2_CD_B__GPIO4_IO20 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ IMX94_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ IMX94_PAD_SD2_CMD__USDHC2_CMD 0x138e
+ IMX94_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
+ IMX94_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
+ IMX94_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
+ IMX94_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
+ IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: usdhc2regvmmcgrp {
+ fsl,pins = <
+ IMX94_PAD_SD2_RESET_B__GPIO4_IO27 0x31e
+ >;
+ };
+};
+
+&usdhc1 {
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ pinctrl-3 = <&pinctrl_usdhc1>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ bus-width = <8>;
+ non-removable;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ bus-width = <4>;
+ cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ fsl,cd-gpio-wakeup-disable;
+ status = "okay";
+};
+
+&wdog3 {
+ fsl,ext-reset-output;
+ status = "okay";
+};
Add the minimal board dts support for i.MX943 EVK. Only the console uart, SD & eMMC are enabled for linux basic boot. Signed-off-by: Jacky Bai <ping.bai@nxp.com> --- - v2 changes: - newly added for board dts --- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx943-evk.dts | 196 +++++++++++++++++++ 2 files changed, 197 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx943-evk.dts