Show patches with: Submitter = Lee, Shawn C       |    State = Action Required       |   206 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[3/5] drm/i915/dsi: wait for header and payload credit available MIPI DSI driver enhancements - - - --- 2021-07-19 Lee, Shawn C New
[2/5] drm/i915/jsl: program DSI panel GPIOs MIPI DSI driver enhancements - - - --- 2021-07-19 Lee, Shawn C New
[1/5] drm/i915/dsi: send correct gpio_number on gen11 platform MIPI DSI driver enhancements - - - --- 2021-07-19 Lee, Shawn C New
drm/i915/dp: return proper DPRX link training result drm/i915/dp: return proper DPRX link training result - - - --- 2021-07-06 Lee, Shawn C New
drm/i915/dp: Fix invalid test parameter when run DP link layer compliance drm/i915/dp: Fix invalid test parameter when run DP link layer compliance - - - --- 2021-06-24 Lee, Shawn C New
[v4] drm/i915: keep backlight_enable on until turn eDP display off [v4] drm/i915: keep backlight_enable on until turn eDP display off - - - --- 2021-06-24 Lee, Shawn C New
[v3] drm/i915: keep backlight_enable on until turn eDP display off [v3] drm/i915: keep backlight_enable on until turn eDP display off - - - --- 2021-06-22 Lee, Shawn C New
drm/i915: keep backlight_enable on until turn eDP display off drm/i915: keep backlight_enable on until turn eDP display off - - - --- 2021-06-22 Lee, Shawn C New
[i-g-t] tests/kms_dp_dsc: Transmit correct DRM connector structure. [i-g-t] tests/kms_dp_dsc: Transmit correct DRM connector structure. - - 1 --- 2021-06-01 Lee, Shawn C New
[i-g-t] tests/kms_dp_dsc: Avoid SIGSEGV when release DRM connector. [i-g-t] tests/kms_dp_dsc: Avoid SIGSEGV when release DRM connector. - 1 1 --- 2021-05-31 Lee, Shawn C New
drm/i915: set min brightness for aux backlight interface. drm/i915: set min brightness for aux backlight interface. - - - --- 2021-04-19 Lee, Shawn C New
[v4] drm/i915/vbt: update DP max link rate table [v4] drm/i915/vbt: update DP max link rate table - - - --- 2021-02-18 Lee, Shawn C New
[v3] drm/i915/vbt: update DP max link rate table [v3] drm/i915/vbt: update DP max link rate table - 1 - --- 2021-02-17 Lee, Shawn C New
[v2] drm/i915/vbt: update DP max link rate table [v2] drm/i915/vbt: update DP max link rate table - - - --- 2021-02-17 Lee, Shawn C New
drm/i915/vbt: update DP max link rate table drm/i915/vbt: update DP max link rate table - - - --- 2021-02-01 Lee, Shawn C New
[v3] drm/i915: support two CSC module on gen11 and later [v3] drm/i915: support two CSC module on gen11 and later - - - --- 2021-01-18 Lee, Shawn C New
[v2] drm/i915: support two CSC module on gen11 and later [v2] drm/i915: support two CSC module on gen11 and later - - - --- 2021-01-15 Lee, Shawn C New
drm/i915: support two CSC module on gen11 and later drm/i915: support two CSC module on gen11 and later - - - --- 2021-01-14 Lee, Shawn C New
[v4] drm/i915/lspcon: enter standby mode to enhance power saving [v4] drm/i915/lspcon: enter standby mode to enhance power saving - - - --- 2020-11-19 Lee, Shawn C New
[v3] drm/i915/lspcon: enter standby mode to enhance power saving [v3] drm/i915/lspcon: enter standby mode to enhance power saving - - - --- 2020-11-18 Lee, Shawn C New
[v2] drm/i915/lspcon: enter standby mode to enhance power saving [v2] drm/i915/lspcon: enter standby mode to enhance power saving - - - --- 2020-11-18 Lee, Shawn C New
[v5] drm/i915/rkl: new rkl ddc map for different PCH [v5] drm/i915/rkl: new rkl ddc map for different PCH - 1 - --- 2020-11-17 Lee, Shawn C New
[v4] drm/i915/rkl: new rkl ddc map for different PCH [v4] drm/i915/rkl: new rkl ddc map for different PCH - - - --- 2020-11-17 Lee, Shawn C New
drm/i915/lspcon: enter standby mode to enhance power saving drm/i915/lspcon: enter standby mode to enhance power saving - - - --- 2020-11-16 Lee, Shawn C New
[v3] drm/i915/rkl: new rkl ddc map for different PCH [v3] drm/i915/rkl: new rkl ddc map for different PCH - - - --- 2020-11-02 Lee, Shawn C New
[v2] drm/i915/rkl: new rkl ddc map for different PCH [v2] drm/i915/rkl: new rkl ddc map for different PCH - - - --- 2020-10-30 Lee, Shawn C New
drm/i915/rkl: new rkl ddc map for different PCH drm/i915/rkl: new rkl ddc map for different PCH - - - --- 2020-10-28 Lee, Shawn C New
drm/i915: wait PSR state back to idle when turn PSR off drm/i915: wait PSR state back to idle when turn PSR off - - - --- 2020-10-21 Lee, Shawn C New
[v2] drm/i915/fbc: disable FBC on Nightfury board [v2] drm/i915/fbc: disable FBC on Nightfury board - - - --- 2020-09-11 Lee, Shawn C New
drm/i915/fbc: disable FBC on Nightfury board drm/i915/fbc: disable FBC on Nightfury board - - - --- 2020-08-27 Lee, Shawn C New
[v2] drm/i915/fbc: Disable fbc with VT-d also with cometlake [v2] drm/i915/fbc: Disable fbc with VT-d also with cometlake - - - --- 2020-08-26 Lee, Shawn C New
drm/i915/fbc: Disable fbc with VT-d also with cometlake drm/i915/fbc: Disable fbc with VT-d also with cometlake - - - --- 2020-08-25 Lee, Shawn C New
[v3] drm/i915/mst: filter out the display mode exceed sink's capability [v3] drm/i915/mst: filter out the display mode exceed sink's capability - - - --- 2020-05-19 Lee, Shawn C New
[v2] drm/i915/mst: filter out the display mode exceed sink's capability [v2] drm/i915/mst: filter out the display mode exceed sink's capability - - - --- 2020-05-11 Lee, Shawn C New
drm/i915/mst: filter out the display mode exceed sink's capability drm/i915/mst: filter out the display mode exceed sink's capability - - - --- 2020-04-17 Lee, Shawn C New
[v2] drm/i915/lspcon: Make sure link rate did not exceed downstream and lspcon limitation [v2] drm/i915/lspcon: Make sure link rate did not exceed downstream and lspcon limitation - - - --- 2020-02-21 Lee, Shawn C New
drm/i915/lspcon: Make sure link rate did not exceed downstream and lspcon limitation drm/i915/lspcon: Make sure link rate did not exceed downstream and lspcon limitation - - - --- 2020-02-05 Lee, Shawn C New
drm/i915: Check require bandwidth did not exceed LSPCON limitation drm/i915: Check require bandwidth did not exceed LSPCON limitation - - - --- 2020-02-05 Lee, Shawn C New
[v2] drm/i915/dp/mst : Get clock rate from sink's available PBN [v2] drm/i915/dp/mst : Get clock rate from sink's available PBN - - - --- 2020-02-05 Lee, Shawn C New
[v3] drm/i915: Check require bandwidth did not exceed LSPCON limitation [v3] drm/i915: Check require bandwidth did not exceed LSPCON limitation - - - --- 2020-01-21 Lee, Shawn C New
[v2] drm/i915: Check require bandwidth did not exceed LSPCON limitation [v2] drm/i915: Check require bandwidth did not exceed LSPCON limitation - - - --- 2020-01-21 Lee, Shawn C New
drm/i915/dp: set fail-safe mode if EDID corrupt drm/i915/dp: set fail-safe mode if EDID corrupt - - - --- 2020-01-21 Lee, Shawn C New
drm/i915: Check require bandwidth did not exceed LSPCON limitation drm/i915: Check require bandwidth did not exceed LSPCON limitation - - - --- 2020-01-17 Lee, Shawn C New
drm/i915/dp/mst : Get clock rate from sink's available PBN drm/i915/dp/mst : Get clock rate from sink's available PBN - - - --- 2020-01-06 Lee, Shawn C New
drm/i915/dp: Fix incorrect test parameter for DP link layer compliance drm/i915/dp: Fix incorrect test parameter for DP link layer compliance - - - --- 2020-01-06 Lee, Shawn C New
drm/i915/dp: Fix incorrect test parameter for DP link layer compliance drm/i915/dp: Fix incorrect test parameter for DP link layer compliance - 2 - --- 2020-01-03 Lee, Shawn C New
[2/2] drm/i915/cml: Separate U series pci id from origianl list. drm/i915/cml: Remove unsupport PCI ID - - - --- 2019-12-10 Lee, Shawn C New
drm/i915/cml: Remove unsupport PCI ID drm/i915/cml: Remove unsupport PCI ID - - - --- 2019-12-10 Lee, Shawn C New
[v3] drm/i915: update rawclk also on resume [v3] drm/i915: update rawclk also on resume - - - --- 2019-11-01 Lee, Shawn C New
[v2] drm/i915: update rawclk also on resume [v2] drm/i915: update rawclk also on resume - - - --- 2019-11-01 Lee, Shawn C New
[v6,2/2] drm/i915/cml: Separate U series pci id from origianl list. [v6,1/2] drm/i915/cml: Remove unsupport PCI ID - - - --- 2019-10-29 Lee, Shawn C New
[v6,1/2] drm/i915/cml: Remove unsupport PCI ID [v6,1/2] drm/i915/cml: Remove unsupport PCI ID - 1 - --- 2019-10-29 Lee, Shawn C New
[v6,2/2] drm/i915/cml: Separate U series pci id from origianl list. [v6,1/2] drm/i915/cml: Remove unsupport PCI ID - - - --- 2019-10-28 Lee, Shawn C New
[v6,1/2] drm/i915/cml: Remove unsupport PCI ID [v6,1/2] drm/i915/cml: Remove unsupport PCI ID - - - --- 2019-10-28 Lee, Shawn C New
[v4] drm/i915/cml: Remove unsupport PCI ID [v4] drm/i915/cml: Remove unsupport PCI ID - - - --- 2019-10-25 Lee, Shawn C New
drm/i915/cml: Remove unsupport PCI ID drm/i915/cml: Remove unsupport PCI ID - - - --- 2019-10-25 Lee, Shawn C New
[v2,2/2] drm/i915/cml: Separate U sereis pci id from origianl list. [v2,1/2] commit 'a7b4deeb02b9 ("drm/i915/cml: Add CML PCI IDS)' introduced new PCI ID that CML supp… - - - --- 2019-10-25 Lee, Shawn C New
[v2,1/2] commit 'a7b4deeb02b9 ("drm/i915/cml: Add CML PCI IDS)' introduced new PCI ID that CML supp… [v2,1/2] commit 'a7b4deeb02b9 ("drm/i915/cml: Add CML PCI IDS)' introduced new PCI ID that CML supp… - - - --- 2019-10-25 Lee, Shawn C New
[2/2] drm/i915/cml: Separate U sereis pci id from origianl list. [1/2] drm/i915/cml: Remove unsupport PCI ID - - - --- 2019-10-25 Lee, Shawn C New
[1/2] drm/i915/cml: Remove unsupport PCI ID [1/2] drm/i915/cml: Remove unsupport PCI ID - - - --- 2019-10-25 Lee, Shawn C New
[v2] drm/i915: customize DPCD brightness control for specific panel [v2] drm/i915: customize DPCD brightness control for specific panel - - - --- 2019-10-09 Lee, Shawn C New
drm/i915: customize DPCD brightness control for specific panel drm/i915: customize DPCD brightness control for specific panel - - - --- 2019-10-04 Lee, Shawn C New
[v2] drm/i915: Refine eDP aux backlight enable/disable sequence [v2] drm/i915: Refine eDP aux backlight enable/disable sequence - - - --- 2019-06-25 Lee, Shawn C New
drm/i915: Refine eDP aux backlight enable/disable sequence drm/i915: Refine eDP aux backlight enable/disable sequence - - - --- 2019-06-21 Lee, Shawn C New
[v2] drm/i915: Refine eDP aux backlight enable/disable sequence [v2] drm/i915: Refine eDP aux backlight enable/disable sequence - - - --- 2019-06-21 Lee, Shawn C New
[v3] drm/i915: Check backlight type while doing eDP backlight initializaiton [v3] drm/i915: Check backlight type while doing eDP backlight initializaiton - 1 - --- 2019-06-20 Lee, Shawn C New
[v2] drm/i915: Check backlight type while doing eDP backlight initializaiton [v2] drm/i915: Check backlight type while doing eDP backlight initializaiton - - - --- 2019-06-19 Lee, Shawn C New
drm/i915: Check backlight type while doing eDP backlight initializaiton drm/i915: Check backlight type while doing eDP backlight initializaiton - - - --- 2019-06-19 Lee, Shawn C New
[2/2] drm/i915: Add backlight enable on/off delay for DP aux backlight control [1/2] drm/i915: Refine eDP aux backlight enable/disable sequence - - - --- 2019-06-14 Lee, Shawn C New
[1/2] drm/i915: Refine eDP aux backlight enable/disable sequence [1/2] drm/i915: Refine eDP aux backlight enable/disable sequence - - - --- 2019-06-14 Lee, Shawn C New
drm/i915: Refine eDP aux backlight enable sequence. drm/i915: Refine eDP aux backlight enable sequence. - - - --- 2019-06-13 Lee, Shawn C New
drm/i915: Backlight control via VESA eDP aux interface drm/i915: Backlight control via VESA eDP aux interface - - - --- 2019-06-10 Lee, Shawn C New
drm/i915: Release power well if load DMC failed drm/i915: Release power well if load DMC failed - - - --- 2018-11-21 Lee, Shawn C New
[2/2] drm/i915: Apply correct ddi translation table for AML device [1/2] drm/i915: Add new AML_ULX support list - 1 - --- 2018-09-27 Lee, Shawn C New
[1/2] drm/i915: Add new AML_ULX support list [1/2] drm/i915: Add new AML_ULX support list - - - --- 2018-09-27 Lee, Shawn C New
drm/i915: Apply correct ddi translation table for AML device drm/i915: Apply correct ddi translation table for AML device - 1 - --- 2018-09-25 Lee, Shawn C New
drm/i915: Add new AML_ULX support list drm/i915: Add new AML_ULX support list - 1 - --- 2018-09-25 Lee, Shawn C New
drm/i915: Add AML id into KBL_ULX support list drm/i915: Add AML id into KBL_ULX support list - - - --- 2018-09-21 Lee, Shawn C New
[v4,3/3] drm: add LG eDP panel to quirk database add LG panel to dpcd quirk database - - - --- 2018-09-12 Lee, Shawn C New
[v4,2/3] drm: Change limited M/N quirk to constant N quirk. add LG panel to dpcd quirk database - - - --- 2018-09-12 Lee, Shawn C New
[v4,1/3] drm: Add support for device_id based detection. add LG panel to dpcd quirk database - - - --- 2018-09-12 Lee, Shawn C New
[3/3] drm: add LG eDP panel to quirk database add LG panel to dpcd quirk database 1 - - --- 2018-09-10 Lee, Shawn C New
[2/3] drm: Change limited M/N quirk to constant N quirk. add LG panel to dpcd quirk database - 1 - --- 2018-09-10 Lee, Shawn C New
[1/3] drm: Add support for device_id based detection. add LG panel to dpcd quirk database - 1 - --- 2018-09-10 Lee, Shawn C New
[v2] drm: add LG eDP panel to quirk database [v2] drm: add LG eDP panel to quirk database - - - --- 2018-09-07 Lee, Shawn C New
drm/i915: add LG eDP panel to quirk database drm/i915: add LG eDP panel to quirk database - - - --- 2018-09-06 Lee, Shawn C New
drm/i915: optimzie eDP 1.4 config drm/i915: optimzie eDP 1.4 config - - - --- 2018-09-04 Lee, Shawn C New
drm/dp: Avoid needless delay while link training - - - --- 2017-09-26 Lee, Shawn C New
drm/i915/cnp: set min brightness from VBT - - - --- 2017-09-13 Lee, Shawn C New
drm/i915/bxt: set min brightness from VBT - - - --- 2017-09-12 Lee, Shawn C New
drm/i915: Add more latency to avoid display flicker - - - --- 2017-08-22 Lee, Shawn C New
[v3] drm/i915/edp: Read link status after exit link training - - - --- 2017-05-05 Lee, Shawn C New
[v2] drm/i915/edp: Read link status after exit link training - - - --- 2017-04-28 Lee, Shawn C New
drm/i915/edp: Read link status after exit PSR - - - --- 2017-04-27 Lee, Shawn C New
[v4] drm/i915/edp: Read link status more times when EQ not done - - - --- 2017-04-25 Lee, Shawn C New
[v3] drm/i915/dp: Read link status more times when EQ not done - - - --- 2017-03-13 Lee, Shawn C New
[v2] drm/i915/dp: Read link status more times when EQ not done - - - --- 2017-03-02 Lee, Shawn C New
drm/i915/dp: Read link status more times when EQ not done - - - --- 2017-03-02 Lee, Shawn C New
[v3] drm/i915/bxt: Add MST support when do DPLL calculation - 6 - --- 2017-02-03 Lee, Shawn C New
drm/i915/dp: Read link status more times when EQ not done - - - --- 2017-02-02 Lee, Shawn C New
« 1 2 3 »