@@ -204,9 +204,10 @@ static void i830_overlay_clock_gating(struct drm_i915_private *dev_priv,
/* WA_OVERLAY_CLKGATE:alm */
if (enable)
- I915_WRITE(DSPCLK_GATE_D, 0);
+ intel_de_write(dev_priv, DSPCLK_GATE_D, 0);
else
- I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
+ intel_de_write(dev_priv, DSPCLK_GATE_D,
+ OVRUNIT_CLOCK_GATE_DISABLE);
/* WA_DISABLE_L2CACHE_CLOCK_GATING:alm */
pci_bus_read_config_byte(pdev->bus,
@@ -321,7 +322,7 @@ static int intel_overlay_continue(struct intel_overlay *overlay,
flip_addr |= OFC_UPDATE;
/* check for underruns */
- tmp = I915_READ(DOVSTA);
+ tmp = intel_de_read(dev_priv, DOVSTA);
if (tmp & (1 << 17))
DRM_DEBUG("overlay underrun, DOVSTA: %x\n", tmp);
@@ -456,7 +457,7 @@ static int intel_overlay_release_old_vid(struct intel_overlay *overlay)
if (!overlay->old_vma)
return 0;
- if (!(I915_READ(GEN2_ISR) & I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT)) {
+ if (!(intel_de_read(dev_priv, GEN2_ISR) & I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT)) {
intel_overlay_release_old_vid_tail(overlay);
return 0;
}
@@ -891,7 +892,7 @@ static int check_overlay_possible_on_crtc(struct intel_overlay *overlay,
static void update_pfit_vscale_ratio(struct intel_overlay *overlay)
{
struct drm_i915_private *dev_priv = overlay->i915;
- u32 pfit_control = I915_READ(PFIT_CONTROL);
+ u32 pfit_control = intel_de_read(dev_priv, PFIT_CONTROL);
u32 ratio;
/* XXX: This is not the same logic as in the xorg driver, but more in
@@ -899,12 +900,12 @@ static void update_pfit_vscale_ratio(struct intel_overlay *overlay)
*/
if (INTEL_GEN(dev_priv) >= 4) {
/* on i965 use the PGM reg to read out the autoscaler values */
- ratio = I915_READ(PFIT_PGM_RATIOS) >> PFIT_VERT_SCALE_SHIFT_965;
+ ratio = intel_de_read(dev_priv, PFIT_PGM_RATIOS) >> PFIT_VERT_SCALE_SHIFT_965;
} else {
if (pfit_control & VERT_AUTO_SCALE)
- ratio = I915_READ(PFIT_AUTO_RATIOS);
+ ratio = intel_de_read(dev_priv, PFIT_AUTO_RATIOS);
else
- ratio = I915_READ(PFIT_PGM_RATIOS);
+ ratio = intel_de_read(dev_priv, PFIT_PGM_RATIOS);
ratio >>= PFIT_VERT_SCALE_SHIFT;
}
@@ -1239,12 +1240,12 @@ int intel_overlay_attrs_ioctl(struct drm_device *dev, void *data,
attrs->saturation = overlay->saturation;
if (!IS_GEN(dev_priv, 2)) {
- attrs->gamma0 = I915_READ(OGAMC0);
- attrs->gamma1 = I915_READ(OGAMC1);
- attrs->gamma2 = I915_READ(OGAMC2);
- attrs->gamma3 = I915_READ(OGAMC3);
- attrs->gamma4 = I915_READ(OGAMC4);
- attrs->gamma5 = I915_READ(OGAMC5);
+ attrs->gamma0 = intel_de_read(dev_priv, OGAMC0);
+ attrs->gamma1 = intel_de_read(dev_priv, OGAMC1);
+ attrs->gamma2 = intel_de_read(dev_priv, OGAMC2);
+ attrs->gamma3 = intel_de_read(dev_priv, OGAMC3);
+ attrs->gamma4 = intel_de_read(dev_priv, OGAMC4);
+ attrs->gamma5 = intel_de_read(dev_priv, OGAMC5);
}
} else {
if (attrs->brightness < -128 || attrs->brightness > 127)
@@ -1274,12 +1275,12 @@ int intel_overlay_attrs_ioctl(struct drm_device *dev, void *data,
if (ret)
goto out_unlock;
- I915_WRITE(OGAMC0, attrs->gamma0);
- I915_WRITE(OGAMC1, attrs->gamma1);
- I915_WRITE(OGAMC2, attrs->gamma2);
- I915_WRITE(OGAMC3, attrs->gamma3);
- I915_WRITE(OGAMC4, attrs->gamma4);
- I915_WRITE(OGAMC5, attrs->gamma5);
+ intel_de_write(dev_priv, OGAMC0, attrs->gamma0);
+ intel_de_write(dev_priv, OGAMC1, attrs->gamma1);
+ intel_de_write(dev_priv, OGAMC2, attrs->gamma2);
+ intel_de_write(dev_priv, OGAMC3, attrs->gamma3);
+ intel_de_write(dev_priv, OGAMC4, attrs->gamma4);
+ intel_de_write(dev_priv, OGAMC5, attrs->gamma5);
}
}
overlay->color_key_enabled = (attrs->flags & I915_OVERLAY_DISABLE_DEST_COLORKEY) == 0;
@@ -1419,8 +1420,8 @@ intel_overlay_capture_error_state(struct drm_i915_private *dev_priv)
if (error == NULL)
return NULL;
- error->dovsta = I915_READ(DOVSTA);
- error->isr = I915_READ(GEN2_ISR);
+ error->dovsta = intel_de_read(dev_priv, DOVSTA);
+ error->isr = intel_de_read(dev_priv, GEN2_ISR);
error->base = overlay->flip_addr;
memcpy_fromio(&error->regs, overlay->regs, sizeof(error->regs));
The implicit "dev_priv" local variable use has been a long-standing pain point in the register access macros I915_READ(), I915_WRITE(), POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW(). Replace them with the corresponding new display engine register accessors intel_de_read(), intel_de_write(), intel_de_posting_read(), intel_de_read_fw(), and intel_de_write_fw(). No functional changes. Generated using the following semantic patch: @@ expression REG, OFFSET; @@ - I915_READ(REG) + intel_de_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - POSTING_READ(REG) + intel_de_posting_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE(REG, OFFSET) + intel_de_write(dev_priv, REG, OFFSET) @@ expression REG; @@ - I915_READ_FW(REG) + intel_de_read_fw(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE_FW(REG, OFFSET) + intel_de_write_fw(dev_priv, REG, OFFSET) Signed-off-by: Jani Nikula <jani.nikula@intel.com> --- drivers/gpu/drm/i915/display/intel_overlay.c | 45 ++++++++++---------- 1 file changed, 23 insertions(+), 22 deletions(-)