@@ -187,7 +187,7 @@ static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
I915_WRITE(PCH_ADPA, adpa);
if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
- 1000, 1))
+ 1000))
DRM_ERROR("timed out waiting for FORCE_TRIGGER");
if (turn_off_dac) {
@@ -244,7 +244,7 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
/* wait for FORCE_DETECT to go off */
if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
CRT_HOTPLUG_FORCE_DETECT) == 0,
- 1000, 1))
+ 1000))
DRM_ERROR("timed out waiting for FORCE_DETECT to go off");
}
@@ -993,7 +993,7 @@ void intel_wait_for_vblank(struct drm_device *dev, int pipe)
/* Wait for vblank interrupt bit to set */
if (wait_for((I915_READ(pipestat_reg) &
PIPE_VBLANK_INTERRUPT_STATUS) == 0,
- 50, 0))
+ 50))
DRM_DEBUG_KMS("vblank wait timed out\n");
}
@@ -1092,7 +1092,7 @@ void i8xx_disable_fbc(struct drm_device *dev)
I915_WRITE(FBC_CONTROL, fbc_ctl);
/* Wait for compressing bit to clear */
- if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10, 0)) {
+ if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10)) {
DRM_DEBUG_KMS("FBC idle timed out\n");
return;
}
@@ -2115,7 +2115,7 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
I915_READ(transconf_reg);
- if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 10, 0))
+ if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 10))
DRM_ERROR("failed to enable transcoder\n");
}
@@ -2147,7 +2147,7 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
/* wait for cpu pipe off, pipe state */
- if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, 50, 1))
+ if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, 50))
DRM_ERROR("failed to turn off cpu pipe\n");
} else
DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
@@ -2211,7 +2211,7 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
/* wait for PCH transcoder off, transcoder state */
- if (wait_for((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0, 50, 1))
+ if (wait_for((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0, 50))
DRM_ERROR("failed to disable transcoder\n");
}
@@ -5553,7 +5553,7 @@ void ironlake_enable_drps(struct drm_device *dev)
rgvmodectl |= MEMMODE_SWMODE_EN;
I915_WRITE(MEMMODECTL, rgvmodectl);
- if (wait_for((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 1, 0))
+ if (wait_for((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10))
DRM_ERROR("stuck trying to change perf mode\n");
msleep(1);
@@ -774,7 +774,7 @@ static void ironlake_edp_panel_on (struct drm_device *dev)
pp |= PANEL_UNLOCK_REGS | POWER_TARGET_ON;
I915_WRITE(PCH_PP_CONTROL, pp);
- if (wait_for(I915_READ(PCH_PP_STATUS) & PP_ON, 5000, 10))
+ if (wait_for(I915_READ(PCH_PP_STATUS) & PP_ON, 5000))
DRM_ERROR("panel on wait timed out: 0x%08x\n",
I915_READ(PCH_PP_STATUS));
@@ -799,7 +799,7 @@ static void ironlake_edp_panel_off (struct drm_device *dev)
pp &= ~POWER_TARGET_ON;
I915_WRITE(PCH_PP_CONTROL, pp);
- if (wait_for((I915_READ(PCH_PP_STATUS) & PP_ON) == 0, 5000, 10))
+ if (wait_for((I915_READ(PCH_PP_STATUS) & PP_ON) == 0, 5000))
DRM_ERROR("panel off wait timed out: 0x%08x\n",
I915_READ(PCH_PP_STATUS));
@@ -33,7 +33,7 @@
#include "drm_crtc_helper.h"
-#define wait_for(COND, MS, W) ({ \
+#define _wait_for(COND, MS, W) ({ \
unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \
int ret__ = 0; \
while (! (COND)) { \
@@ -46,6 +46,9 @@
ret__; \
})
+#define wait_for(COND, MS) _wait_for(COND, MS, 1)
+#define wait_for_atomic(COND, MS) _wait_for(COND, MS, 0)
+
/*
* Display related stuff
*/
@@ -114,7 +114,7 @@ static void intel_lvds_set_power(struct drm_device *dev, bool on)
I915_WRITE(ctl_reg, I915_READ(ctl_reg) |
POWER_TARGET_ON);
- if (wait_for(I915_READ(status_reg) & PP_ON, 1000, 0))
+ if (wait_for(I915_READ(status_reg) & PP_ON, 1000))
DRM_ERROR("timed out waiting to enable LVDS pipe");
intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle);
@@ -123,7 +123,7 @@ static void intel_lvds_set_power(struct drm_device *dev, bool on)
I915_WRITE(ctl_reg, I915_READ(ctl_reg) &
~POWER_TARGET_ON);
- if (wait_for((I915_READ(status_reg) & PP_ON) == 0, 1000, 0))
+ if (wait_for((I915_READ(status_reg) & PP_ON) == 0, 1000))
DRM_ERROR("timed out waiting for LVDS pipe to turn off");
I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);