diff mbox

[09/14] drm/i915: implement workaround for VTOTAL when using TRANSCODER_EDP

Message ID 1350595304-18237-10-git-send-email-przanoni@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Paulo Zanoni Oct. 18, 2012, 9:21 p.m. UTC 
From: Paulo Zanoni <paulo.r.zanoni@intel.com>

See the documentation for the DDI_FUNC_CTL register, EDP Input Select
bits: when the EDP input selection is B, the VTOTAL_B must be
programmed with the VTOTAL_EDP value, same thing for selection C.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 9202cb6..cc859b3 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4376,6 +4376,17 @@  static void intel_set_pipe_timings(struct intel_crtc *intel_crtc,
 		   (adjusted_mode->crtc_vsync_start - 1) |
 		   ((adjusted_mode->crtc_vsync_end - 1) << 16));
 
+	/* Workaround: when the EDP input selection is B, the VTOTAL_B must be
+	 * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
+	 * documented on the DDI_FUNC_CTL register description, EDP Input Select
+	 * bits. */
+	if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP &&
+	    (pipe == PIPE_B || pipe == PIPE_C)) {
+		I915_WRITE(VTOTAL(pipe),
+			   (adjusted_mode->crtc_vdisplay - 1) |
+			   ((adjusted_mode->crtc_vtotal - 1) << 16));
+	}
+
 	/* pipesrc controls the size that is scaled from, which should
 	 * always be the user's requested size.
 	 */