| Message ID | 1359985042-2610-3-git-send-email-jbarnes@virtuousgeek.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Feb 04, 2013 at 01:37:22PM +0000, Jesse Barnes wrote: > Add support for resuming the suspend configuration at resume time to > avoid slow and ugly VT switches during suspend and resume. Also emit a > hotplug event at resume time to make sure any potential configuration > changes (monitors coming and going, dock events) are handled properly. > > v2: use new fb flag to indicate we don't need to VT switch > > Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> > --- > drivers/gpu/drm/i915/i915_drv.c | 28 +++++++++++++++++++++++++--- > drivers/gpu/drm/i915/i915_drv.h | 1 + > drivers/gpu/drm/i915/intel_display.c | 25 +++++++++++++++++++++++++ > drivers/gpu/drm/i915/intel_fb.c | 3 +++ > 4 files changed, 54 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c > index 1172658..7dbaa01 100644 > --- a/drivers/gpu/drm/i915/i915_drv.c > +++ b/drivers/gpu/drm/i915/i915_drv.c > @@ -483,8 +483,6 @@ static int i915_drm_freeze(struct drm_device *dev) > > cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work); > > - intel_modeset_disable(dev); > - You can't just drop this without replacement I think, check git blame for why it's been added. > drm_irq_uninstall(dev); > } > > @@ -544,6 +542,24 @@ void intel_console_resume(struct work_struct *work) > console_unlock(); > } > > +static void intel_resume_hotplug(struct drm_device *dev) > +{ > + struct drm_mode_config *mode_config = &dev->mode_config; > + struct intel_encoder *encoder; > + > + mutex_lock(&mode_config->mutex); > + DRM_DEBUG_KMS("running encoder hotplug functions\n"); > + > + list_for_each_entry(encoder, &mode_config->encoder_list, base.head) > + if (encoder->hot_plug) > + encoder->hot_plug(encoder); > + > + mutex_unlock(&mode_config->mutex); > + > + /* Just fire off a uevent and let userspace tell us what to do */ > + drm_helper_hpd_irq_event(dev); > +} This should imo be in a separate patch, since afaict we don't bother with this right now. And I guess we should figure out how this should be done across drm drivers ... > + > static int __i915_drm_thaw(struct drm_device *dev) > { > struct drm_i915_private *dev_priv = dev->dev_private; > @@ -563,8 +579,14 @@ static int __i915_drm_thaw(struct drm_device *dev) > mutex_unlock(&dev->struct_mutex); > > intel_modeset_init_hw(dev); > - intel_modeset_setup_hw_state(dev, false); Since this doesn't add any delays (besides a few register reads), but adds tons of paranoid checks for our state-handling: Why drop it? Dropping this also explains why you get away with killing intel_modeset_disable without swimming in a see of WARN_ONs ;-) > drm_irq_install(dev); > + > + /* Resume the modeset for every activated CRTC */ > + mutex_lock(&dev->mode_config.mutex); > + intel_resume_force_mode(dev); > + mutex_unlock(&dev->mode_config.mutex); > + > + intel_resume_hotplug(dev); > } > > intel_opregion_init(dev); > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h > index 12ab3bd..c8b1896 100644 > --- a/drivers/gpu/drm/i915/i915_drv.h > +++ b/drivers/gpu/drm/i915/i915_drv.h > @@ -1680,6 +1680,7 @@ extern void gen6_set_rps(struct drm_device *dev, u8 val); > extern void intel_detect_pch(struct drm_device *dev); > extern int intel_trans_dp_port_sel(struct drm_crtc *crtc); > extern int intel_enable_rc6(const struct drm_device *dev); > +extern int intel_resume_force_mode(struct drm_device *dev); > > extern bool i915_semaphore_is_enabled(struct drm_device *dev); > int i915_reg_read_ioctl(struct drm_device *dev, void *data, > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c > index da1ad9c..a127877 100644 > --- a/drivers/gpu/drm/i915/intel_display.c > +++ b/drivers/gpu/drm/i915/intel_display.c > @@ -9369,6 +9369,31 @@ void intel_modeset_cleanup(struct drm_device *dev) > drm_mode_config_cleanup(dev); > } > > +int intel_resume_force_mode(struct drm_device *dev) > +{ > + struct drm_crtc *crtc; > + struct drm_encoder *encoder; > + struct drm_encoder_helper_funcs *encoder_funcs; > + struct drm_crtc_helper_funcs *crtc_funcs; > + int ret; > + > + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { > + > + if (!crtc->enabled) { > + DRM_ERROR("skipping disabled crtc\n"); > + continue; > + } > + > + ret = intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, > + crtc->fb); > + > + if (ret == false) > + DRM_ERROR("failed to set mode on crtc %p\n", crtc); > + } > + > + return 0; > +} intel_modeset_setup_hw_state(dev, true); should do exactly this trick, see the lid notifier in intel_lvds.c. That presumes though that you don't kill the modeset state, which might require some changes in intel_modeset_disable. > + > /* > * Return which encoder is currently attached for connector. > */ > diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c > index 7b30b5c..d4955b5 100644 > --- a/drivers/gpu/drm/i915/intel_fb.c > +++ b/drivers/gpu/drm/i915/intel_fb.c > @@ -148,6 +148,9 @@ static int intelfb_create(struct intel_fbdev *ifbdev, > } > info->screen_size = size; > > + /* This driver doesn't need a VT switch to restore the mode on resume */ > + info->skip_vt_switch = true; > + > // memset(info->screen_base, 0, size); Follow-up patch to kill this // commented-line? > > drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth); > -- > 1.7.9.5 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 1172658..7dbaa01 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -483,8 +483,6 @@ static int i915_drm_freeze(struct drm_device *dev) cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work); - intel_modeset_disable(dev); - drm_irq_uninstall(dev); } @@ -544,6 +542,24 @@ void intel_console_resume(struct work_struct *work) console_unlock(); } +static void intel_resume_hotplug(struct drm_device *dev) +{ + struct drm_mode_config *mode_config = &dev->mode_config; + struct intel_encoder *encoder; + + mutex_lock(&mode_config->mutex); + DRM_DEBUG_KMS("running encoder hotplug functions\n"); + + list_for_each_entry(encoder, &mode_config->encoder_list, base.head) + if (encoder->hot_plug) + encoder->hot_plug(encoder); + + mutex_unlock(&mode_config->mutex); + + /* Just fire off a uevent and let userspace tell us what to do */ + drm_helper_hpd_irq_event(dev); +} + static int __i915_drm_thaw(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -563,8 +579,14 @@ static int __i915_drm_thaw(struct drm_device *dev) mutex_unlock(&dev->struct_mutex); intel_modeset_init_hw(dev); - intel_modeset_setup_hw_state(dev, false); drm_irq_install(dev); + + /* Resume the modeset for every activated CRTC */ + mutex_lock(&dev->mode_config.mutex); + intel_resume_force_mode(dev); + mutex_unlock(&dev->mode_config.mutex); + + intel_resume_hotplug(dev); } intel_opregion_init(dev); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 12ab3bd..c8b1896 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1680,6 +1680,7 @@ extern void gen6_set_rps(struct drm_device *dev, u8 val); extern void intel_detect_pch(struct drm_device *dev); extern int intel_trans_dp_port_sel(struct drm_crtc *crtc); extern int intel_enable_rc6(const struct drm_device *dev); +extern int intel_resume_force_mode(struct drm_device *dev); extern bool i915_semaphore_is_enabled(struct drm_device *dev); int i915_reg_read_ioctl(struct drm_device *dev, void *data, diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index da1ad9c..a127877 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -9369,6 +9369,31 @@ void intel_modeset_cleanup(struct drm_device *dev) drm_mode_config_cleanup(dev); } +int intel_resume_force_mode(struct drm_device *dev) +{ + struct drm_crtc *crtc; + struct drm_encoder *encoder; + struct drm_encoder_helper_funcs *encoder_funcs; + struct drm_crtc_helper_funcs *crtc_funcs; + int ret; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + + if (!crtc->enabled) { + DRM_ERROR("skipping disabled crtc\n"); + continue; + } + + ret = intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, + crtc->fb); + + if (ret == false) + DRM_ERROR("failed to set mode on crtc %p\n", crtc); + } + + return 0; +} + /* * Return which encoder is currently attached for connector. */ diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 7b30b5c..d4955b5 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -148,6 +148,9 @@ static int intelfb_create(struct intel_fbdev *ifbdev, } info->screen_size = size; + /* This driver doesn't need a VT switch to restore the mode on resume */ + info->skip_vt_switch = true; + // memset(info->screen_base, 0, size); drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth);
Add support for resuming the suspend configuration at resume time to avoid slow and ugly VT switches during suspend and resume. Also emit a hotplug event at resume time to make sure any potential configuration changes (monitors coming and going, dock events) are handled properly. v2: use new fb flag to indicate we don't need to VT switch Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> --- drivers/gpu/drm/i915/i915_drv.c | 28 +++++++++++++++++++++++++--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_display.c | 25 +++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_fb.c | 3 +++ 4 files changed, 54 insertions(+), 3 deletions(-)