drm/i915: get mode clock when reading the pipe config

Commit Message

Jesse Barnes May 3, 2013, 8:43 p.m. UTC

We need this for comparing modes between configuration changes.

Signed-off-by: Jesse Barnes <[e-mail]>
---
 drivers/gpu/drm/i915/intel_display.c |   49 +++++++++++++++++++++++++++++-----
 1 file changed, 43 insertions(+), 6 deletions(-)

Patch

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7b4005b..0696e4a 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -45,6 +45,11 @@  bool intel_pipe_has_type(struct drm_crtc *crtc, int type);
 static void intel_increase_pllclock(struct drm_crtc *crtc);
 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
 
+static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
+				struct intel_crtc_config *pipe_config);
+static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
+				    struct intel_crtc_config *pipe_config);
+
 typedef struct {
 	int	min, max;
 } intel_range_t;
@@ -4981,6 +4986,8 @@  static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
 
 	intel_get_pipe_timings(crtc, pipe_config);
 
+	i9xx_crtc_clock_get(crtc, pipe_config);
+
 	return true;
 }
 
@@ -5900,6 +5907,8 @@  static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
 
 	intel_get_pipe_timings(crtc, pipe_config);
 
+	ironlake_crtc_clock_get(crtc, pipe_config);
+
 	return true;
 }
 
@@ -6048,6 +6057,8 @@  static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 
 	intel_get_pipe_timings(crtc, pipe_config);
 
+	ironlake_crtc_clock_get(crtc, pipe_config);
+
 	return true;
 }
 
@@ -6902,11 +6913,12 @@  void intel_release_load_detect_pipe(struct drm_connector *connector,
 }
 
 /* Returns the clock of the currently programmed mode of the given pipe. */
-static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
+static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
+				struct intel_crtc_config *pipe_config)
 {
+	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int pipe = intel_crtc->pipe;
+	int pipe = pipe_config->cpu_transcoder;
 	u32 dpll = I915_READ(DPLL(pipe));
 	u32 fp;
 	intel_clock_t clock;
@@ -6945,7 +6957,8 @@  static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
 		default:
 			DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
 				  "mode\n", (int)(dpll & DPLL_MODE_MASK));
-			return 0;
+			pipe_config->adjusted_mode.clock = 0;
+			return;
 		}
 
 		/* XXX: Handle the 100Mhz refclk */
@@ -6984,8 +6997,28 @@  static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
 	 * i830PllIsValid() because it relies on the xf86_config connector
 	 * configuration being accurate, which it isn't necessarily.
 	 */
+	pipe_config->adjusted_mode.clock = clock.dot;
+}
+
+static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
+				    struct intel_crtc_config *pipe_config)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
+	int clock;
+	u32 link_m;
+
+	/*
+	 * PCH platforms make this easy: we can just use the LINK_M1 reg.
+	 * Note: this may be the pixel clock for a fitted mode, in which
+	 * case it won't match the native mode clock.  That means we won't be
+	 * able to do a simple flip in the fastboot case.
+	 */
+	link_m = I915_READ(PIPE_LINK_M1(cpu_transcoder));
+	clock = link_m;
 
-	return clock.dot;
+	pipe_config->adjusted_mode.clock = clock;
 }
 
 /** Returns the currently programmed mode of the given pipe. */
@@ -6996,6 +7029,7 @@  struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
 	struct drm_display_mode *mode;
+	struct intel_crtc_config pipe_config;
 	int htot = I915_READ(HTOTAL(cpu_transcoder));
 	int hsync = I915_READ(HSYNC(cpu_transcoder));
 	int vtot = I915_READ(VTOTAL(cpu_transcoder));
@@ -7005,7 +7039,10 @@  struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
 	if (!mode)
 		return NULL;
 
-	mode->clock = intel_crtc_clock_get(dev, crtc);
+	pipe_config.cpu_transcoder = intel_crtc->pipe;
+	i9xx_crtc_clock_get(intel_crtc, &pipe_config);
+
+	mode->clock = pipe_config.adjusted_mode.clock;
 	mode->hdisplay = (htot & 0xffff) + 1;
 	mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
 	mode->hsync_start = (hsync & 0xffff) + 1;