diff mbox

CHROMIUM: drivers: i915: Default backlight PWM frequency

Message ID 1376613069-15790-12-git-send-email-james.ausmus@intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

James Ausmus Aug. 16, 2013, 12:30 a.m. UTC
From: Simon Que <sque@chromium.org>

If the firmware did not initialize the backlight PWM registers, set up a
default PWM frequency of 200 Hz.  This is determined using the following
formula:

  freq = refclk / (128 * pwm_max)

The PWM register allows the max PWM value to be set.  So we want to use
the formula, where freq = 200:

  pwm_max = refclk / (128 * freq)

This patch will, in the case of missing PWM register initialization
values, look for the reference clock frequency.  Based on that, it sets
an appropriate max PWM value for a frequency of 200 Hz.

If no refclk frequency is found, the max PWM will be zero, which results
in no change to the PWM registers.

BUG=chrome-os-partner:5570
TEST=x86 backlight works smoothly w/o dev mode

Change-Id: I4219ab8a2481afbcc3586288594b066fcc6c8294
Signed-off-by: Simon Que <sque@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/11629
Reviewed-by: Bryan Freed <bfreed@chromium.org>
Reviewed-by: Sameer Nanda <snanda@chromium.org>
[marcheu: Fixed up for dev_priv->dev and regfile transition]
Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
---
 drivers/gpu/drm/i915/intel_panel.c | 39 ++++++++++++++++++++++++++++++++------
 1 file changed, 33 insertions(+), 6 deletions(-)
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index bee8cb6..affd930 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -35,6 +35,12 @@ 
 
 #define PCI_LBPC 0xf4 /* legacy/combination backlight modes */
 
+/* These are used to calculate a reasonable default when firmware has not
+ * configured a maximum PWM frequency, with 200Hz as the current default target.
+ */
+#define DEFAULT_BACKLIGHT_PWM_FREQ   200
+#define BACKLIGHT_REFCLK_DIVISOR     128
+
 void
 intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
 		       struct drm_display_mode *adjusted_mode)
@@ -130,13 +136,34 @@  static int is_backlight_combination_mode(struct drm_device *dev)
 	return 0;
 }
 
+static void i915_set_default_max_backlight(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 refclk_freq_mhz = 0;
+	u32 max_pwm;
+
+	if (HAS_PCH_SPLIT(dev_priv->dev))
+		refclk_freq_mhz = I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
+	else if (dev_priv->lvds_use_ssc)
+		refclk_freq_mhz = dev_priv->lvds_ssc_freq;
+
+	max_pwm = refclk_freq_mhz * 1000000 /
+			(BACKLIGHT_REFCLK_DIVISOR * DEFAULT_BACKLIGHT_PWM_FREQ);
+
+	if (HAS_PCH_SPLIT(dev_priv->dev))
+		dev_priv->regfile.saveBLC_PWM_CTL2 = max_pwm << 16;
+	else if (IS_PINEVIEW(dev_priv->dev))
+		dev_priv->regfile.saveBLC_PWM_CTL = max_pwm << 17;
+	else
+		dev_priv->regfile.saveBLC_PWM_CTL = max_pwm << 16;
+}
+
 static u32 i915_read_blc_pwm_ctl(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 val;
 
-	/* Restore the CTL value if it lost, e.g. GPU reset */
-
+	/* Restore the CTL value if it was lost, e.g. GPU reset */
 	if (HAS_PCH_SPLIT(dev_priv->dev)) {
 		val = I915_READ(BLC_PWM_PCH_CTL2);
 		if (dev_priv->regfile.saveBLC_PWM_CTL2 == 0) {
@@ -191,11 +218,11 @@  u32 intel_panel_get_max_backlight(struct drm_device *dev)
 
 	max = _intel_panel_get_max_backlight(dev);
 	if (max == 0) {
-		/* XXX add code here to query mode clock or hardware clock
-		 * and program max PWM appropriately.
+		/* If backlight PWM registers have not been set, set them to
+		 * default backlight PWM settings.
 		 */
-		pr_warn_once("fixme: max PWM is zero\n");
-		return 1;
+		i915_set_default_max_backlight(dev);
+		max = i915_read_blc_pwm_ctl(dev);
 	}
 
 	DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max);