diff mbox

drm/i915: move infoframe setting to after pll enable v3

Message ID 1396723895-10271-1-git-send-email-jbarnes@virtuousgeek.org (mailing list archive)
State New, archived
Headers show

Commit Message

Jesse Barnes April 5, 2014, 6:51 p.m. UTC
Needs to happen after clock is running or it doesn't behave correctly.

v2: fix subject (Ville)
    make it clearer that this occurs in pre_enable (Paulo)
    misc bikesheds (Paulo)

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_hdmi.c |   18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

Comments

Paulo Zanoni April 7, 2014, 12:54 p.m. UTC | #1
2014-04-05 15:51 GMT-03:00 Jesse Barnes <jbarnes@virtuousgeek.org>:
> Needs to happen after clock is running or it doesn't behave correctly.
>
> v2: fix subject (Ville)
>     make it clearer that this occurs in pre_enable (Paulo)
>     misc bikesheds (Paulo)
>
> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

> ---
>  drivers/gpu/drm/i915/intel_hdmi.c |   18 ++++++++++++++++--
>  1 file changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index fb9839b..fd940a7 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -669,8 +669,6 @@ static void intel_hdmi_mode_set(struct intel_encoder *encoder)
>
>         I915_WRITE(intel_hdmi->hdmi_reg, hdmi_val);
>         POSTING_READ(intel_hdmi->hdmi_reg);
> -
> -       intel_hdmi->set_infoframes(&encoder->base, adjusted_mode);
>  }
>
>  static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,
> @@ -1115,13 +1113,26 @@ done:
>         return 0;
>  }
>
> +static void intel_hdmi_pre_enable(struct intel_encoder *encoder)
> +{
> +       struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
> +       struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> +       struct drm_display_mode *adjusted_mode =
> +               &intel_crtc->config.adjusted_mode;
> +
> +       intel_hdmi->set_infoframes(&encoder->base, adjusted_mode);
> +}
> +
>  static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
>  {
>         struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
> +       struct intel_hdmi *intel_hdmi = &dport->hdmi;
>         struct drm_device *dev = encoder->base.dev;
>         struct drm_i915_private *dev_priv = dev->dev_private;
>         struct intel_crtc *intel_crtc =
>                 to_intel_crtc(encoder->base.crtc);
> +       struct drm_display_mode *adjusted_mode =
> +               &intel_crtc->config.adjusted_mode;
>         enum dpio_channel port = vlv_dport_to_channel(dport);
>         int pipe = intel_crtc->pipe;
>         u32 val;
> @@ -1155,6 +1166,8 @@ static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
>         vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888);
>         mutex_unlock(&dev_priv->dpio_lock);
>
> +       intel_hdmi->set_infoframes(&encoder->base, adjusted_mode);
> +
>         intel_enable_hdmi(encoder);
>
>         vlv_wait_port_ready(dev_priv, dport);
> @@ -1350,6 +1363,7 @@ void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port)
>                 intel_encoder->enable = vlv_enable_hdmi;
>                 intel_encoder->post_disable = vlv_hdmi_post_disable;
>         } else {
> +               intel_encoder->pre_enable = intel_hdmi_pre_enable;
>                 intel_encoder->enable = intel_enable_hdmi;
>         }
>
> --
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Daniel Vetter April 9, 2014, 12:48 p.m. UTC | #2
On Mon, Apr 07, 2014 at 09:54:50AM -0300, Paulo Zanoni wrote:
> 2014-04-05 15:51 GMT-03:00 Jesse Barnes <jbarnes@virtuousgeek.org>:
> > Needs to happen after clock is running or it doesn't behave correctly.
> >
> > v2: fix subject (Ville)
> >     make it clearer that this occurs in pre_enable (Paulo)
> >     misc bikesheds (Paulo)
> >
> > Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
> 
> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

All 4 patches merged to dinq, thanks.
-Daniel

> 
> > ---
> >  drivers/gpu/drm/i915/intel_hdmi.c |   18 ++++++++++++++++--
> >  1 file changed, 16 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> > index fb9839b..fd940a7 100644
> > --- a/drivers/gpu/drm/i915/intel_hdmi.c
> > +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> > @@ -669,8 +669,6 @@ static void intel_hdmi_mode_set(struct intel_encoder *encoder)
> >
> >         I915_WRITE(intel_hdmi->hdmi_reg, hdmi_val);
> >         POSTING_READ(intel_hdmi->hdmi_reg);
> > -
> > -       intel_hdmi->set_infoframes(&encoder->base, adjusted_mode);
> >  }
> >
> >  static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,
> > @@ -1115,13 +1113,26 @@ done:
> >         return 0;
> >  }
> >
> > +static void intel_hdmi_pre_enable(struct intel_encoder *encoder)
> > +{
> > +       struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
> > +       struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> > +       struct drm_display_mode *adjusted_mode =
> > +               &intel_crtc->config.adjusted_mode;
> > +
> > +       intel_hdmi->set_infoframes(&encoder->base, adjusted_mode);
> > +}
> > +
> >  static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
> >  {
> >         struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
> > +       struct intel_hdmi *intel_hdmi = &dport->hdmi;
> >         struct drm_device *dev = encoder->base.dev;
> >         struct drm_i915_private *dev_priv = dev->dev_private;
> >         struct intel_crtc *intel_crtc =
> >                 to_intel_crtc(encoder->base.crtc);
> > +       struct drm_display_mode *adjusted_mode =
> > +               &intel_crtc->config.adjusted_mode;
> >         enum dpio_channel port = vlv_dport_to_channel(dport);
> >         int pipe = intel_crtc->pipe;
> >         u32 val;
> > @@ -1155,6 +1166,8 @@ static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
> >         vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888);
> >         mutex_unlock(&dev_priv->dpio_lock);
> >
> > +       intel_hdmi->set_infoframes(&encoder->base, adjusted_mode);
> > +
> >         intel_enable_hdmi(encoder);
> >
> >         vlv_wait_port_ready(dev_priv, dport);
> > @@ -1350,6 +1363,7 @@ void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port)
> >                 intel_encoder->enable = vlv_enable_hdmi;
> >                 intel_encoder->post_disable = vlv_hdmi_post_disable;
> >         } else {
> > +               intel_encoder->pre_enable = intel_hdmi_pre_enable;
> >                 intel_encoder->enable = intel_enable_hdmi;
> >         }
> >
> > --
> > 1.7.9.5
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> 
> 
> -- 
> Paulo Zanoni
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index fb9839b..fd940a7 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -669,8 +669,6 @@  static void intel_hdmi_mode_set(struct intel_encoder *encoder)
 
 	I915_WRITE(intel_hdmi->hdmi_reg, hdmi_val);
 	POSTING_READ(intel_hdmi->hdmi_reg);
-
-	intel_hdmi->set_infoframes(&encoder->base, adjusted_mode);
 }
 
 static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,
@@ -1115,13 +1113,26 @@  done:
 	return 0;
 }
 
+static void intel_hdmi_pre_enable(struct intel_encoder *encoder)
+{
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+	struct drm_display_mode *adjusted_mode =
+		&intel_crtc->config.adjusted_mode;
+
+	intel_hdmi->set_infoframes(&encoder->base, adjusted_mode);
+}
+
 static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
 {
 	struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+	struct intel_hdmi *intel_hdmi = &dport->hdmi;
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc =
 		to_intel_crtc(encoder->base.crtc);
+	struct drm_display_mode *adjusted_mode =
+		&intel_crtc->config.adjusted_mode;
 	enum dpio_channel port = vlv_dport_to_channel(dport);
 	int pipe = intel_crtc->pipe;
 	u32 val;
@@ -1155,6 +1166,8 @@  static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
 	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888);
 	mutex_unlock(&dev_priv->dpio_lock);
 
+	intel_hdmi->set_infoframes(&encoder->base, adjusted_mode);
+
 	intel_enable_hdmi(encoder);
 
 	vlv_wait_port_ready(dev_priv, dport);
@@ -1350,6 +1363,7 @@  void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port)
 		intel_encoder->enable = vlv_enable_hdmi;
 		intel_encoder->post_disable = vlv_hdmi_post_disable;
 	} else {
+		intel_encoder->pre_enable = intel_hdmi_pre_enable;
 		intel_encoder->enable = intel_enable_hdmi;
 	}