diff mbox

[05/14] drm/i915: add support for Z-order of planes

Message ID 1397855070-4480-6-git-send-email-rodrigo.vivi@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Rodrigo Vivi April 18, 2014, 9:04 p.m. UTC
From: "Yu(Alex) Dai" <yu.dai@intel.com>

Add "zorder" property to crtc to control Z-order of sprite and
primary planes. The plane tag is packed into the 64 bits value
in the order of from bottom (lower bits) to top (higher bits).
Four bits are used for each plane tag. It can support up to 16
planes.

The alpha channel of the plane is set during Z-order change. If
a plane is put to the bottom, its alpha channel is off. Otherwise,
its alpha channel is on.

Signed-off-by: Yu(Alex) Dai <yu.dai@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
---
 drivers/gpu/drm/i915/i915_drv.h      |   1 +
 drivers/gpu/drm/i915/i915_reg.h      |   3 +
 drivers/gpu/drm/i915/intel_display.c |  58 +++++++++++++++--
 drivers/gpu/drm/i915/intel_drv.h     |   6 ++
 drivers/gpu/drm/i915/intel_sprite.c  | 119 ++++++++++++++++++++++++++++++++++-
 include/uapi/drm/i915_drm.h          |   6 ++
 6 files changed, 186 insertions(+), 7 deletions(-)
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7d6acb4..6e14de9 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2516,6 +2516,7 @@  int i915_reg_read_ioctl(struct drm_device *dev, void *data,
 			struct drm_file *file);
 int i915_get_reset_stats_ioctl(struct drm_device *dev, void *data,
 			       struct drm_file *file);
+extern int i915_set_plane_zorder(struct drm_crtc *crtc, uint64_t zorder);
 
 /* overlay */
 extern struct intel_overlay_error_state *intel_overlay_capture_error_state(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 8f84555..8c382a5 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3881,6 +3881,9 @@  enum punit_power_well {
 #define   SPRITE_INT_GAMMA_ENABLE	(1<<13)
 #define   SPRITE_TILED			(1<<10)
 #define   SPRITE_DEST_KEY		(1<<2)
+#define   SPRITE_FORCE_BOTTOM		(1<<2)
+#define   SPRITE_ZORDER_ENABLE		(1<<0)
+
 #define _SPRA_LINOFF		0x70284
 #define _SPRA_STRIDE		0x70288
 #define _SPRA_POS		0x7028c
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index cd68a24..d245cca 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2169,18 +2169,27 @@  static int i9xx_update_primary_plane(struct drm_crtc *crtc,
 		break;
 	case DRM_FORMAT_XRGB1555:
 	case DRM_FORMAT_ARGB1555:
-		dspcntr |= DISPPLANE_BGRX555;
+		if (intel_crtc->primary_alpha)
+			dspcntr |= DISPPLANE_BGRA555;
+		else
+			dspcntr |= DISPPLANE_BGRX555;
 		break;
 	case DRM_FORMAT_RGB565:
 		dspcntr |= DISPPLANE_BGRX565;
 		break;
 	case DRM_FORMAT_XRGB8888:
 	case DRM_FORMAT_ARGB8888:
-		dspcntr |= DISPPLANE_BGRX888;
+		if (intel_crtc->primary_alpha)
+			dspcntr |= DISPPLANE_BGRA888;
+		else
+			dspcntr |= DISPPLANE_BGRX888;
 		break;
 	case DRM_FORMAT_XBGR8888:
 	case DRM_FORMAT_ABGR8888:
-		dspcntr |= DISPPLANE_RGBX888;
+		if (intel_crtc->primary_alpha)
+			dspcntr |= DISPPLANE_RGBA888;
+		else
+			dspcntr |= DISPPLANE_RGBX888;
 		break;
 	case DRM_FORMAT_XRGB2101010:
 	case DRM_FORMAT_ARGB2101010:
@@ -2188,7 +2197,10 @@  static int i9xx_update_primary_plane(struct drm_crtc *crtc,
 		break;
 	case DRM_FORMAT_XBGR2101010:
 	case DRM_FORMAT_ABGR2101010:
-		dspcntr |= DISPPLANE_RGBX101010;
+		if (intel_crtc->primary_alpha)
+			dspcntr |= DISPPLANE_RGBA101010;
+		else
+			dspcntr |= DISPPLANE_RGBX101010;
 		break;
 	default:
 		BUG();
@@ -8470,6 +8482,9 @@  static void intel_crtc_destroy(struct drm_crtc *crtc)
 
 	intel_crtc_cursor_set(crtc, NULL, 0, 0, 0);
 
+	if (intel_crtc->zorder_property)
+		drm_property_destroy(dev, intel_crtc->zorder_property);
+
 	drm_crtc_cleanup(crtc);
 
 	kfree(intel_crtc);
@@ -10422,6 +10437,27 @@  out_config:
 	return ret;
 }
 
+static int intel_crtc_set_property(struct drm_crtc *crtc,
+				   struct drm_property *prop,
+				   uint64_t val)
+{
+	struct intel_crtc *icrtc = to_intel_crtc(crtc);
+	int ret = -ENOENT;
+
+	if (prop && prop == icrtc->zorder_property) {
+		/* Simply return if no change in zorder */
+		if (icrtc->zorder == val)
+			return 0;
+
+		ret = i915_set_plane_zorder(crtc, val);
+
+		if (!ret)
+			icrtc->zorder = val;
+	}
+
+	return ret;
+}
+
 static const struct drm_crtc_funcs intel_crtc_funcs = {
 	.cursor_set = intel_crtc_cursor_set,
 	.cursor_move = intel_crtc_cursor_move,
@@ -10429,6 +10465,7 @@  static const struct drm_crtc_funcs intel_crtc_funcs = {
 	.set_config = intel_crtc_set_config,
 	.destroy = intel_crtc_destroy,
 	.page_flip = intel_crtc_page_flip,
+	.set_property = intel_crtc_set_property,
 };
 
 static void intel_cpu_pll_init(struct drm_device *dev)
@@ -10536,6 +10573,7 @@  static void intel_crtc_init(struct drm_device *dev, int pipe)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc;
+	struct drm_property *prop = 0;
 	int i;
 
 	intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL);
@@ -10568,6 +10606,18 @@  static void intel_crtc_init(struct drm_device *dev, int pipe)
 	dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
 
 	drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
+
+	intel_crtc->primary_alpha = false;
+	intel_crtc->sprite0_alpha = true;
+	intel_crtc->sprite1_alpha = true;
+
+	if (IS_VALLEYVIEW(dev))
+		prop = drm_property_create(dev, 0, "zorder", 1);
+
+	if (prop)
+		drm_object_attach_property(&intel_crtc->base.base, prop, 0);
+
+	intel_crtc->zorder_property = prop;
 }
 
 enum pipe intel_get_pipe_from_connector(struct intel_connector *connector)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index c551472..c684427 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -387,6 +387,9 @@  struct intel_crtc {
 	bool new_enabled;
 
 	uint32_t ddi_pll_sel;
+	bool primary_alpha;
+	bool sprite0_alpha;
+	bool sprite1_alpha;
 
 	/* reset counter value when the last flip was submitted */
 	unsigned int reset_counter;
@@ -400,6 +403,9 @@  struct intel_crtc {
 		/* watermarks currently being used  */
 		struct intel_pipe_wm active;
 	} wm;
+
+	struct drm_property *zorder_property;
+	uint64_t zorder;
 };
 
 struct intel_plane_wm_parameters {
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 336ae6c..fb495d9 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -37,6 +37,101 @@ 
 #include <drm/i915_drm.h>
 #include "i915_drv.h"
 
+static int vlv_set_plane_zorder(struct drm_crtc *crtc, uint64_t order)
+{
+	struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+	u32 val;
+	int s1_zorder = 0, s1_bottom = 0, s2_zorder = 0, s2_bottom = 0;
+	unsigned int i, z_order[I915_PLANE_MAX_NUM];
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+
+	/* Get plane order from bottom (lower bits) to top (higher bits) */
+	for (i = 0; i < I915_PLANE_MAX_NUM; i++)
+		z_order[i] = (order >> (i*4)) & 0xF;
+
+	/* The top layer must be cursor */
+	if (z_order[i-1] != I915_PLANE_CURSOR)
+		return -EINVAL;
+
+	/* No duplicated setting */
+	if (z_order[0] == z_order[1] ||
+		z_order[0] == z_order[2] ||
+		z_order[1] == z_order[2])
+		return -EINVAL;
+
+	switch (z_order[0]) {
+	case I915_PLANE_PRIMARY:
+		if (z_order[1] == I915_PLANE_SPRITE_B)
+			s1_zorder = 1;
+		break;
+	case I915_PLANE_SPRITE_A:
+		s1_bottom = 1;
+		if (z_order[1] == I915_PLANE_SPRITE_B)
+			s2_zorder = 1;
+		break;
+	case I915_PLANE_SPRITE_B:
+		s2_bottom = 1;
+		if (z_order[1] == I915_PLANE_SPRITE_A)
+			s1_zorder = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Clear the older Z-order */
+	val = I915_READ(SPCNTR(pipe, 0));
+	val &= ~(SPRITE_FORCE_BOTTOM | SPRITE_ZORDER_ENABLE);
+	I915_WRITE(SPCNTR(pipe, 0), val);
+
+	val = I915_READ(SPCNTR(pipe, 1));
+	val &= ~(SPRITE_FORCE_BOTTOM | SPRITE_ZORDER_ENABLE);
+	I915_WRITE(SPCNTR(pipe, 1), val);
+
+	/* Program new Z-order */
+	val = I915_READ(SPCNTR(pipe, 0));
+	if (s1_zorder)
+		val |= SPRITE_ZORDER_ENABLE;
+	if (s1_bottom)
+		val |= SPRITE_FORCE_BOTTOM;
+	I915_WRITE(SPCNTR(pipe, 0), val);
+
+	val = I915_READ(SPCNTR(pipe, 1));
+	if (s2_zorder)
+		val |= SPRITE_ZORDER_ENABLE;
+	if (s2_bottom)
+		val |= SPRITE_FORCE_BOTTOM;
+	I915_WRITE(SPCNTR(pipe, 1), val);
+
+	/* If a plane is not at bottom, the alpha channel should be on. */
+	if (z_order[0] != I915_PLANE_PRIMARY)
+		intel_crtc->primary_alpha = true;
+	else
+		intel_crtc->primary_alpha = false;
+
+	if (z_order[0] != I915_PLANE_SPRITE_A)
+		intel_crtc->sprite0_alpha = true;
+	else
+		intel_crtc->sprite0_alpha = false;
+
+	if (z_order[0] != I915_PLANE_SPRITE_B)
+		intel_crtc->sprite1_alpha = true;
+	else
+		intel_crtc->sprite1_alpha = false;
+
+	return 0;
+}
+
+int i915_set_plane_zorder(struct drm_crtc *crtc, uint64_t val)
+{
+	int ret = -ENOENT;
+
+	if (IS_VALLEYVIEW(crtc->dev))
+		ret = vlv_set_plane_zorder(crtc, val);
+
+	return ret;
+}
+
 static void
 vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 		 struct drm_framebuffer *fb,
@@ -50,10 +145,19 @@  vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 	struct intel_plane *intel_plane = to_intel_plane(dplane);
 	int pipe = intel_plane->pipe;
 	int plane = intel_plane->plane;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	u32 sprctl;
+	bool alpha = true;
 	unsigned long sprsurf_offset, linear_offset;
 	int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
 
+	if (plane && intel_crtc->sprite1_alpha)
+		alpha = true;
+	else if (!plane && intel_crtc->sprite0_alpha)
+		alpha = true;
+	else
+		alpha = false;
+
 	sprctl = I915_READ(SPCNTR(pipe, plane));
 
 	/* Mask out pixel format bits in case we change it */
@@ -81,19 +185,28 @@  vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 		sprctl |= SP_FORMAT_BGRX8888;
 		break;
 	case DRM_FORMAT_ARGB8888:
-		sprctl |= SP_FORMAT_BGRA8888;
+		if (alpha)
+			sprctl |= SP_FORMAT_BGRA8888;
+		else
+			sprctl |= SP_FORMAT_BGRX8888;
 		break;
 	case DRM_FORMAT_XBGR2101010:
 		sprctl |= SP_FORMAT_RGBX1010102;
 		break;
 	case DRM_FORMAT_ABGR2101010:
-		sprctl |= SP_FORMAT_RGBA1010102;
+		if (alpha)
+			sprctl |= SP_FORMAT_RGBA1010102;
+		else
+			sprctl |= SP_FORMAT_RGBX1010102;
 		break;
 	case DRM_FORMAT_XBGR8888:
 		sprctl |= SP_FORMAT_RGBX8888;
 		break;
 	case DRM_FORMAT_ABGR8888:
-		sprctl |= SP_FORMAT_RGBA8888;
+		if (alpha)
+			sprctl |= SP_FORMAT_RGBA8888;
+		else
+			sprctl |= SP_FORMAT_RGBX8888;
 		break;
 	default:
 		/*
diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h
index 8a3e4ef00..3f6eb90 100644
--- a/include/uapi/drm/i915_drm.h
+++ b/include/uapi/drm/i915_drm.h
@@ -1050,4 +1050,10 @@  struct drm_i915_reset_stats {
 	__u32 pad;
 };
 
+#define I915_PLANE_PRIMARY		0
+#define I915_PLANE_SPRITE_A		1
+#define I915_PLANE_SPRITE_B		2
+#define I915_PLANE_CURSOR		3
+#define I915_PLANE_MAX_NUM		(I915_PLANE_CURSOR + 1)
+
 #endif /* _UAPI_I915_DRM_H_ */