| Message ID | 1402410657-4768-1-git-send-email-thomas.wood@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Jun 10, 2014 at 03:30:51PM +0100, Thomas Wood wrote: > Piglit now has a top level "piglit" command and the location of the > tests can now be read from an environment variable. > > Signed-off-by: Thomas Wood <thomas.wood@intel.com> > --- > README | 27 ++++++++++----------------- > 1 file changed, 10 insertions(+), 17 deletions(-) > > diff --git a/README b/README > index 2cfb5c5..cfa186d 100644 > --- a/README > +++ b/README > @@ -34,32 +34,25 @@ tests/ > > git://anongit.freedesktop.org/piglit > > - and build it (no need to install anything). Then we need to link up the > - i-g-t sources with piglit > + There is no need to build and install piglit if it is only going to be > + used for running i-g-t tests. > + > + Set the IGT_TEST_ROOT environment variable to point to the tests > + directory or link up the i-g-t sources with piglit using a symlink: > > piglit-sources $ cd bin > piglit-sources/bin $ ln $i-g-t-sources igt -s > > - To avoid some hassles with piglit's use of Waffle just disable it. Run > - > - piglit-sources $ cmake -D PIGLIT_USE_WAFFLE=OFF . > - > - With > - > - piglit-sources $ ccmake . > - > - you can check your configuration with a curses interface, too. Hm, why did you drop this? I run into "lack of waffle" every time I try to use piglit ... Otherwise looks good. -Daniel > - > - The tests in the i-g-t sources need to have been built already. Then we > - can run the testcases with (as usual as root, no other drm clients > - running): > + In both cases, the tests in the i-g-t sources need to have been built > + already. Then we can run the testcases with (as usual as root, no other > + drm clients running): > > - piglit-sources # ./piglit-run.py igt <results-file> > + piglit-sources # ./piglit run igt <results-file> > > The testlist is built at runtime, so no need to update anything in > piglit when adding new tests. See > > - piglit-sources $ ./piglit-run.py -h > + piglit-sources $ ./piglit run -h > > for some useful options. > > -- > 1.9.3 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
On 10 June 2014 15:37, Daniel Vetter <daniel@ffwll.ch> wrote: > On Tue, Jun 10, 2014 at 03:30:51PM +0100, Thomas Wood wrote: >> Piglit now has a top level "piglit" command and the location of the >> tests can now be read from an environment variable. >> >> Signed-off-by: Thomas Wood <thomas.wood@intel.com> >> --- >> README | 27 ++++++++++----------------- >> 1 file changed, 10 insertions(+), 17 deletions(-) >> >> diff --git a/README b/README >> index 2cfb5c5..cfa186d 100644 >> --- a/README >> +++ b/README >> @@ -34,32 +34,25 @@ tests/ >> >> git://anongit.freedesktop.org/piglit >> >> - and build it (no need to install anything). Then we need to link up the >> - i-g-t sources with piglit >> + There is no need to build and install piglit if it is only going to be >> + used for running i-g-t tests. >> + >> + Set the IGT_TEST_ROOT environment variable to point to the tests >> + directory or link up the i-g-t sources with piglit using a symlink: >> >> piglit-sources $ cd bin >> piglit-sources/bin $ ln $i-g-t-sources igt -s >> >> - To avoid some hassles with piglit's use of Waffle just disable it. Run >> - >> - piglit-sources $ cmake -D PIGLIT_USE_WAFFLE=OFF . >> - >> - With >> - >> - piglit-sources $ ccmake . >> - >> - you can check your configuration with a curses interface, too. > > Hm, why did you drop this? I run into "lack of waffle" every time I try to > use piglit ... Otherwise looks good. Since there's no need to actually build the Piglit test cases when running intel-gpu-tools tests, there's no requirement for waffle either. > -Daniel > >> - >> - The tests in the i-g-t sources need to have been built already. Then we >> - can run the testcases with (as usual as root, no other drm clients >> - running): >> + In both cases, the tests in the i-g-t sources need to have been built >> + already. Then we can run the testcases with (as usual as root, no other >> + drm clients running): >> >> - piglit-sources # ./piglit-run.py igt <results-file> >> + piglit-sources # ./piglit run igt <results-file> >> >> The testlist is built at runtime, so no need to update anything in >> piglit when adding new tests. See >> >> - piglit-sources $ ./piglit-run.py -h >> + piglit-sources $ ./piglit run -h >> >> for some useful options. >> >> -- >> 1.9.3 >> >> _______________________________________________ >> Intel-gfx mailing list >> Intel-gfx@lists.freedesktop.org >> http://lists.freedesktop.org/mailman/listinfo/intel-gfx > > -- > Daniel Vetter > Software Engineer, Intel Corporation > +41 (0) 79 365 57 48 - http://blog.ffwll.ch
On Tue, Jun 10, 2014 at 04:06:17PM +0100, Thomas Wood wrote: > On 10 June 2014 15:37, Daniel Vetter <daniel@ffwll.ch> wrote: > > On Tue, Jun 10, 2014 at 03:30:51PM +0100, Thomas Wood wrote: > >> Piglit now has a top level "piglit" command and the location of the > >> tests can now be read from an environment variable. > >> > >> Signed-off-by: Thomas Wood <thomas.wood@intel.com> > >> --- > >> README | 27 ++++++++++----------------- > >> 1 file changed, 10 insertions(+), 17 deletions(-) > >> > >> diff --git a/README b/README > >> index 2cfb5c5..cfa186d 100644 > >> --- a/README > >> +++ b/README > >> @@ -34,32 +34,25 @@ tests/ > >> > >> git://anongit.freedesktop.org/piglit > >> > >> - and build it (no need to install anything). Then we need to link up the > >> - i-g-t sources with piglit > >> + There is no need to build and install piglit if it is only going to be > >> + used for running i-g-t tests. > >> + > >> + Set the IGT_TEST_ROOT environment variable to point to the tests > >> + directory or link up the i-g-t sources with piglit using a symlink: > >> > >> piglit-sources $ cd bin > >> piglit-sources/bin $ ln $i-g-t-sources igt -s > >> > >> - To avoid some hassles with piglit's use of Waffle just disable it. Run > >> - > >> - piglit-sources $ cmake -D PIGLIT_USE_WAFFLE=OFF . > >> - > >> - With > >> - > >> - piglit-sources $ ccmake . > >> - > >> - you can check your configuration with a curses interface, too. > > > > Hm, why did you drop this? I run into "lack of waffle" every time I try to > > use piglit ... Otherwise looks good. > > Since there's no need to actually build the Piglit test cases when > running intel-gpu-tools tests, there's no requirement for waffle > either. Oh right ;-) Can you please mention this for dummies like me? -Daniel
diff --git a/README b/README index 2cfb5c5..cfa186d 100644 --- a/README +++ b/README @@ -34,32 +34,25 @@ tests/ git://anongit.freedesktop.org/piglit - and build it (no need to install anything). Then we need to link up the - i-g-t sources with piglit + There is no need to build and install piglit if it is only going to be + used for running i-g-t tests. + + Set the IGT_TEST_ROOT environment variable to point to the tests + directory or link up the i-g-t sources with piglit using a symlink: piglit-sources $ cd bin piglit-sources/bin $ ln $i-g-t-sources igt -s - To avoid some hassles with piglit's use of Waffle just disable it. Run - - piglit-sources $ cmake -D PIGLIT_USE_WAFFLE=OFF . - - With - - piglit-sources $ ccmake . - - you can check your configuration with a curses interface, too. - - The tests in the i-g-t sources need to have been built already. Then we - can run the testcases with (as usual as root, no other drm clients - running): + In both cases, the tests in the i-g-t sources need to have been built + already. Then we can run the testcases with (as usual as root, no other + drm clients running): - piglit-sources # ./piglit-run.py igt <results-file> + piglit-sources # ./piglit run igt <results-file> The testlist is built at runtime, so no need to update anything in piglit when adding new tests. See - piglit-sources $ ./piglit-run.py -h + piglit-sources $ ./piglit run -h for some useful options.
Piglit now has a top level "piglit" command and the location of the tests can now be read from an environment variable. Signed-off-by: Thomas Wood <thomas.wood@intel.com> --- README | 27 ++++++++++----------------- 1 file changed, 10 insertions(+), 17 deletions(-)