@@ -324,7 +324,7 @@ enum i915_fs_channel {
(z##_CHANNEL_VAL << Z_CHANNEL_SHIFT) | \
(w##_CHANNEL_VAL << W_CHANNEL_SHIFT)
-/**
+/*
* Construct an operand description for using a register with no swizzling
*/
#define i915_fs_operand_reg(reg) \
@@ -333,17 +333,17 @@ enum i915_fs_channel {
#define i915_fs_operand_reg_negate(reg) \
i915_fs_operand(reg, NEG_X, NEG_Y, NEG_Z, NEG_W)
-/**
+/*
* Returns an operand containing (0.0, 0.0, 0.0, 0.0).
*/
#define i915_fs_operand_zero() i915_fs_operand(FS_R0, ZERO, ZERO, ZERO, ZERO)
-/**
+/*
* Returns an unused operand
*/
#define i915_fs_operand_none() i915_fs_operand_zero()
-/**
+/*
* Returns an operand containing (1.0, 1.0, 1.0, 1.0).
*/
#define i915_fs_operand_one() i915_fs_operand(FS_R0, ONE, ONE, ONE, ONE)
@@ -351,7 +351,7 @@ enum i915_fs_channel {
#define i915_get_hardware_channel_val(val, shift, negate) \
(((val & 0x7) << shift) | ((val & 0x8) ? negate : 0))
-/**
+/*
* Outputs a fragment shader command to declare a sampler or texture register.
*/
#define i915_fs_dcl(reg) \
@@ -519,19 +519,19 @@ enum i915_fs_channel {
i915_fs_operand_none(), \
i915_fs_operand_none())
-/** Add operand0 and operand1 and put the result in dest_reg */
+/* Add operand0 and operand1 and put the result in dest_reg */
#define i915_fs_add(dest_reg, operand0, operand1) \
i915_fs_arith (ADD, dest_reg, \
operand0, operand1, \
i915_fs_operand_none())
-/** Multiply operand0 and operand1 and put the result in dest_reg */
+/* Multiply operand0 and operand1 and put the result in dest_reg */
#define i915_fs_mul(dest_reg, operand0, operand1) \
i915_fs_arith (MUL, dest_reg, \
operand0, operand1, \
i915_fs_operand_none())
-/** Computes 1/sqrt(operand0.replicate_swizzle) puts the result in dest_reg */
+/* Computes 1/sqrt(operand0.replicate_swizzle) puts the result in dest_reg */
#define i915_fs_rsq(dest_reg, dest_mask, operand0) \
do { \
if (dest_mask) { \
@@ -547,13 +547,13 @@ enum i915_fs_channel {
} \
} while (0)
-/** Puts the minimum of operand0 and operand1 in dest_reg */
+/* Puts the minimum of operand0 and operand1 in dest_reg */
#define i915_fs_min(dest_reg, operand0, operand1) \
i915_fs_arith (MIN, dest_reg, \
operand0, operand1, \
i915_fs_operand_none())
-/** Puts the maximum of operand0 and operand1 in dest_reg */
+/* Puts the maximum of operand0 and operand1 in dest_reg */
#define i915_fs_max(dest_reg, operand0, operand1) \
i915_fs_arith (MAX, dest_reg, \
operand0, operand1, \
@@ -562,7 +562,7 @@ enum i915_fs_channel {
#define i915_fs_cmp(dest_reg, operand0, operand1, operand2) \
i915_fs_arith (CMP, dest_reg, operand0, operand1, operand2)
-/** Perform operand0 * operand1 + operand2 and put the result in dest_reg */
+/* Perform operand0 * operand1 + operand2 and put the result in dest_reg */
#define i915_fs_mad(dest_reg, dest_mask, op0, op1, op2) \
do { \
if (dest_mask) { \
@@ -581,7 +581,7 @@ enum i915_fs_channel {
} \
} while (0)
-/**
+/*
* Perform a 3-component dot-product of operand0 and operand1 and put the
* resulting scalar in the channels of dest_reg specified by the dest_mask.
*/
@@ -597,7 +597,7 @@ enum i915_fs_channel {
} \
} while (0)
-/**
+/*
* Sets up local state for accumulating a fragment shader buffer.
*
* \param x maximum number of shader commands that may be used between
@@ -26,7 +26,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
**************************************************************************/
-/** @file
+/* @file
* Register names and fields for Intel graphics.
*/
@@ -322,19 +322,19 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define VCLK_DIVISOR_VGA0 0x6000
#define VCLK_DIVISOR_VGA1 0x6004
#define VCLK_POST_DIV 0x6010
-/** Selects a post divisor of 4 instead of 2. */
+/* Selects a post divisor of 4 instead of 2. */
# define VGA1_PD_P2_DIV_4 (1 << 15)
-/** Overrides the p2 post divisor field */
+/* Overrides the p2 post divisor field */
# define VGA1_PD_P1_DIV_2 (1 << 13)
# define VGA1_PD_P1_SHIFT 8
-/** P1 value is 2 greater than this field */
+/* P1 value is 2 greater than this field */
# define VGA1_PD_P1_MASK (0x1f << 8)
-/** Selects a post divisor of 4 instead of 2. */
+/* Selects a post divisor of 4 instead of 2. */
# define VGA0_PD_P2_DIV_4 (1 << 7)
-/** Overrides the p2 post divisor field */
+/* Overrides the p2 post divisor field */
# define VGA0_PD_P1_DIV_2 (1 << 5)
# define VGA0_PD_P1_SHIFT 0
-/** P1 value is 2 greater than this field */
+/* P1 value is 2 greater than this field */
# define VGA0_PD_P1_MASK (0x1f << 0)
#define POST_DIV_SELECT 0x70
@@ -571,7 +571,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define PGETBL_ADDR_MASK 0xFFFFF000
#define PGETBL_ENABLE_MASK 0x00000001
#define PGETBL_ENABLED 0x00000001
-/** Added in 965G, this field has the actual size of the global GTT */
+/* Added in 965G, this field has the actual size of the global GTT */
#define PGETBL_SIZE_MASK 0x0000000e
#define PGETBL_SIZE_512KB (0 << 1)
#define PGETBL_SIZE_256KB (1 << 1)
@@ -592,10 +592,10 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define PTE_MAPPING_TYPE_MASK (3 << 1)
#define PTE_VALID (1 << 0)
-/** @defgroup PGE_ERR
+/* @defgroup PGE_ERR
* @{
*/
-/** Page table debug register for i845 */
+/* Page table debug register for i845 */
#define PGE_ERR 0x2024
#define PGE_ERR_ADDR_MASK 0xFFFFF000
#define PGE_ERR_ID_MASK 0x00000038
@@ -615,12 +615,12 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define PGE_ERR_ILLEGAL_TRX 0x00000004
#define PGE_ERR_LOCAL_MEM 0x00000005
#define PGE_ERR_TILED 0x00000006
-/** @} */
+/* @} */
-/** @defgroup PGTBL_ER
+/* @defgroup PGTBL_ER
* @{
*/
-/** Page table debug register for i945 */
+/* Page table debug register for i945 */
# define PGTBL_ER 0x2024
# define PGTBL_ERR_MT_TILING (1 << 27)
# define PGTBL_ERR_MT_GTT_PTE (1 << 26)
@@ -641,7 +641,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
# define PGTBL_ERR_DISPA_GTT_PTE (1 << 4)
# define PGTBL_ERR_HOST_PTE_DATA (1 << 1)
# define PGTBL_ERR_HOST_GTT_PTE (1 << 0)
-/** @} */
+/* @} */
/* Ring buffer registers, p277, overview p19
*/
@@ -880,7 +880,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define PP_STATUS 0x61200
# define PP_ON (1 << 31)
-/**
+/*
* Indicates that all dependencies of the panel are on:
*
* - PLL enabled
@@ -954,12 +954,12 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
# define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */
# define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
# define DPLL_FPA01_P1_POST_DIV_MASK_IGD 0x00ff8000 /* IGD */
-/**
+/*
* The i830 generation, in DAC/serial mode, defines p1 as two plus this
* bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set.
*/
# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000
-/**
+/*
* The i830 generation, in LVDS mode, defines P1 as the bit number set within
* this field (only one bit may be set).
*/
@@ -991,7 +991,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
# define DPLL_FPA1_P1_POST_DIV_SHIFT 0
# define DPLL_FPA1_P1_POST_DIV_MASK 0xff
-/**
+/*
* SDVO multiplier for 945G/GM. Not used on 965.
*
* \sa DPLL_MD_UDI_MULTIPLIER_MASK
@@ -1000,24 +1000,24 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
# define SDVO_MULTIPLIER_SHIFT_HIRES 4
# define SDVO_MULTIPLIER_SHIFT_VGA 0
-/** @defgroup DPLL_MD
+/* @defgroup DPLL_MD
* @{
*/
-/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */
+/* Pipe A SDVO/UDI clock multiplier/divider register for G965. */
#define DPLL_A_MD 0x0601c
-/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */
+/* Pipe B SDVO/UDI clock multiplier/divider register for G965. */
#define DPLL_B_MD 0x06020
-/**
+/*
* UDI pixel divider, controlling how many pixels are stuffed into a packet.
*
* Value is pixels minus 1. Must be set to 1 pixel for SDVO.
*/
# define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000
# define DPLL_MD_UDI_DIVIDER_SHIFT 24
-/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
+/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
# define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000
# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16
-/**
+/*
* SDVO/UDI pixel multiplier.
*
* SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
@@ -1036,13 +1036,13 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
# define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00
# define DPLL_MD_UDI_MULTIPLIER_SHIFT 8
-/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
+/* SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
* This best be set to the default value (3) or the CRT won't work. No,
* I don't entirely understand what this does...
*/
# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f
# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0
-/** @} */
+/* @} */
#define DPLL_TEST 0x606c
# define DPLLB_TEST_SDVO_DIV_1 (0 << 22)
@@ -1086,7 +1086,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
# define DPIOUNIT_CLOCK_GATE_DISABLE (1 << 6) /* 915-945 */
# define OVFUNIT_CLOCK_GATE_DISABLE (1 << 5)
# define OVBUNIT_CLOCK_GATE_DISABLE (1 << 4)
-/**
+/*
* This bit must be set on the 830 to prevent hangs when turning off the
* overlay scaler.
*/
@@ -1106,12 +1106,12 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
# define COLOR_CALCULATOR_CLOCK_GATE_DISABLE (1 << 7)
# define MOTION_COMP_CLOCK_GATE_DISABLE (1 << 6)
# define MAG_CLOCK_GATE_DISABLE (1 << 5)
-/** This bit must be unset on 855,865 */
+/* This bit must be unset on 855,865 */
# define MECI_CLOCK_GATE_DISABLE (1 << 4)
# define DCMP_CLOCK_GATE_DISABLE (1 << 3)
# define MEC_CLOCK_GATE_DISABLE (1 << 2)
# define MECO_CLOCK_GATE_DISABLE (1 << 1)
-/** This bit must be set on 855,865. */
+/* This bit must be set on 855,865. */
# define SV_CLOCK_GATE_DISABLE (1 << 0)
# define I915_MPEG_CLOCK_GATE_DISABLE (1 << 16)
# define I915_VLD_IP_PR_CLOCK_GATE_DISABLE (1 << 15)
@@ -1132,14 +1132,14 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
# define I915_BY_CLOCK_GATE_DISABLE (1 << 0)
# define I965_RCZ_CLOCK_GATE_DISABLE (1 << 30)
-/** This bit must always be set on 965G/965GM */
+/* This bit must always be set on 965G/965GM */
# define I965_RCC_CLOCK_GATE_DISABLE (1 << 29)
# define I965_RCPB_CLOCK_GATE_DISABLE (1 << 28)
# define I965_DAP_CLOCK_GATE_DISABLE (1 << 27)
# define I965_ROC_CLOCK_GATE_DISABLE (1 << 26)
# define I965_GW_CLOCK_GATE_DISABLE (1 << 25)
# define I965_TD_CLOCK_GATE_DISABLE (1 << 24)
-/** This bit must always be set on 965G */
+/* This bit must always be set on 965G */
# define I965_ISC_CLOCK_GATE_DISABLE (1 << 23)
# define I965_IC_CLOCK_GATE_DISABLE (1 << 22)
# define I965_EU_CLOCK_GATE_DISABLE (1 << 21)
@@ -1178,7 +1178,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define BLC_PWM_CTL 0x61254
#define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
#define BACKLIGHT_MODULATION_FREQ_SHIFT2 (16)
-/**
+/*
* This is the most significant 15 bits of the number of backlight cycles in a
* complete cycle of the modulated backlight control.
*
@@ -1188,7 +1188,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define BACKLIGHT_MODULATION_FREQ_MASK2 (0xffff << 16)
#define BLM_LEGACY_MODE (1 << 16)
-/**
+/*
* This is the number of cycles out of the backlight modulation cycle for which
* the backlight is on.
*
@@ -1274,7 +1274,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define SDVO_PIPE_B_SELECT (1 << 30)
#define SDVO_STALL_SELECT (1 << 29)
#define SDVO_INTERRUPT_ENABLE (1 << 26)
-/**
+/*
* 915G/GM SDVO pixel multiplier.
*
* Programmed value is multiplier - 1, up to 5x.
@@ -1289,15 +1289,15 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define SDVOC_GANG_MODE (1 << 16)
#define SDVO_ENCODING_SDVO (0x0 << 10)
#define SDVO_ENCODING_HDMI (0x2 << 10)
-/** Requird for HDMI operation */
+/* Requird for HDMI operation */
#define SDVO_NULL_PACKETS_DURING_VSYNC (1 << 9)
#define SDVO_BORDER_ENABLE (1 << 7)
#define SDVO_AUDIO_ENABLE (1 << 6)
-/** New with 965, default is to be set */
+/* New with 965, default is to be set */
#define SDVO_VSYNC_ACTIVE_HIGH (1 << 4)
-/** New with 965, default is to be set */
+/* New with 965, default is to be set */
#define SDVO_HSYNC_ACTIVE_HIGH (1 << 3)
-/** 915/945 only, read-only bit */
+/* 915/945 only, read-only bit */
#define SDVOB_PCIE_CONCURRENCY (1 << 3)
#define SDVO_DETECTED (1 << 2)
/* Bits to be preserved when writing */
@@ -1398,22 +1398,22 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define DVO_SRCDIM_HORIZONTAL_SHIFT 12
#define DVO_SRCDIM_VERTICAL_SHIFT 0
-/** @defgroup LVDS
+/* @defgroup LVDS
* @{
*/
-/**
+/*
* This register controls the LVDS output enable, pipe selection, and data
* format selection.
*
* All of the clock/data pairs are force powered down by power sequencing.
*/
#define LVDS 0x61180
-/**
+/*
* Enables the LVDS port. This bit must be set before DPLLs are enabled, as
* the DPLL semantics change when the LVDS is assigned to that pipe.
*/
# define LVDS_PORT_EN (1 << 31)
-/** Selects pipe B for LVDS data. Must be set on pre-965. */
+/* Selects pipe B for LVDS data. Must be set on pre-965. */
# define LVDS_PIPEB_SELECT (1 << 30)
/* on 965, dithering is enabled in this register, not PFIT_CONTROL */
@@ -1473,14 +1473,14 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
# define LVDS_POWER_DOWN_TRI_STATE (1 << 10)
-/**
+/*
* Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
* pixel.
*/
# define LVDS_A0A2_CLKA_POWER_MASK (3 << 8)
# define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8)
# define LVDS_A0A2_CLKA_POWER_UP (3 << 8)
-/**
+/*
* Controls the A3 data pair, which contains the additional LSBs for 24 bit
* mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
* on.
@@ -1488,7 +1488,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
# define LVDS_A3_POWER_MASK (3 << 6)
# define LVDS_A3_POWER_DOWN (0 << 6)
# define LVDS_A3_POWER_UP (3 << 6)
-/**
+/*
* Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP
* is set.
*/
@@ -1496,7 +1496,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
# define LVDS_CLKB_POWER_DOWN (0 << 4)
# define LVDS_CLKB_POWER_UP (3 << 4)
-/**
+/*
* Controls the B0-B3 data pairs. This must be set to match the DPLL p2
* setting for whether we are in dual-channel mode. The B3 pair will
* additionally only be powered up when LVDS_A3_POWER_UP is set.
@@ -1505,7 +1505,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
# define LVDS_B0B3_POWER_DOWN (0 << 2)
# define LVDS_B0B3_POWER_UP (3 << 2)
-/** @} */
+/* @} */
#define DP_B 0x64100
#define DPB_AUX_CH_CTL 0x64110
@@ -1561,110 +1561,110 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
/* data lines active (both timing and colour) */
# define LVDS_B_POWER_UP (3 << 2)
-/** @defgroup TV_CTL
+/* @defgroup TV_CTL
* @{
*/
#define TV_CTL 0x68000
-/** Enables the TV encoder */
+/* Enables the TV encoder */
# define TV_ENC_ENABLE (1 << 31)
-/** Sources the TV encoder input from pipe B instead of A. */
+/* Sources the TV encoder input from pipe B instead of A. */
# define TV_ENC_PIPEB_SELECT (1 << 30)
-/** Outputs composite video (DAC A only) */
+/* Outputs composite video (DAC A only) */
# define TV_ENC_OUTPUT_COMPOSITE (0 << 28)
-/** Outputs SVideo video (DAC B/C) */
+/* Outputs SVideo video (DAC B/C) */
# define TV_ENC_OUTPUT_SVIDEO (1 << 28)
-/** Outputs Component video (DAC A/B/C) */
+/* Outputs Component video (DAC A/B/C) */
# define TV_ENC_OUTPUT_COMPONENT (2 << 28)
-/** Outputs Composite and SVideo (DAC A/B/C) */
+/* Outputs Composite and SVideo (DAC A/B/C) */
# define TV_ENC_OUTPUT_SVIDEO_COMPOSITE (3 << 28)
# define TV_TRILEVEL_SYNC (1 << 21)
-/** Enables slow sync generation (945GM only) */
+/* Enables slow sync generation (945GM only) */
# define TV_SLOW_SYNC (1 << 20)
-/** Selects 4x oversampling for 480i and 576p */
+/* Selects 4x oversampling for 480i and 576p */
# define TV_OVERSAMPLE_4X (0 << 18)
-/** Selects 2x oversampling for 720p and 1080i */
+/* Selects 2x oversampling for 720p and 1080i */
# define TV_OVERSAMPLE_2X (1 << 18)
-/** Selects no oversampling for 1080p */
+/* Selects no oversampling for 1080p */
# define TV_OVERSAMPLE_NONE (2 << 18)
-/** Selects 8x oversampling */
+/* Selects 8x oversampling */
# define TV_OVERSAMPLE_8X (3 << 18)
-/** Selects progressive mode rather than interlaced */
+/* Selects progressive mode rather than interlaced */
# define TV_PROGRESSIVE (1 << 17)
-/** Sets the colorburst to PAL mode. Required for non-M PAL modes. */
+/* Sets the colorburst to PAL mode. Required for non-M PAL modes. */
# define TV_PAL_BURST (1 << 16)
-/** Field for setting delay of Y compared to C */
+/* Field for setting delay of Y compared to C */
# define TV_YC_SKEW_MASK (7 << 12)
-/** Enables a fix for 480p/576p standard definition modes on the 915GM only */
+/* Enables a fix for 480p/576p standard definition modes on the 915GM only */
# define TV_ENC_SDP_FIX (1 << 11)
-/**
+/*
* Enables a fix for the 915GM only.
*
* Not sure what it does.
*/
# define TV_ENC_C0_FIX (1 << 10)
-/** Bits that must be preserved by software */
+/* Bits that must be preserved by software */
# define TV_CTL_SAVE ((1 << 11) | (3 << 9) | (7 << 6) | 0xf)
# define TV_FUSE_STATE_MASK (3 << 4)
-/** Read-only state that reports all features enabled */
+/* Read-only state that reports all features enabled */
# define TV_FUSE_STATE_ENABLED (0 << 4)
-/** Read-only state that reports that Macrovision is disabled in hardware*/
+/* Read-only state that reports that Macrovision is disabled in hardware*/
# define TV_FUSE_STATE_NO_MACROVISION (1 << 4)
-/** Read-only state that reports that TV-out is disabled in hardware. */
+/* Read-only state that reports that TV-out is disabled in hardware. */
# define TV_FUSE_STATE_DISABLED (2 << 4)
-/** Normal operation */
+/* Normal operation */
# define TV_TEST_MODE_NORMAL (0 << 0)
-/** Encoder test pattern 1 - combo pattern */
+/* Encoder test pattern 1 - combo pattern */
# define TV_TEST_MODE_PATTERN_1 (1 << 0)
-/** Encoder test pattern 2 - full screen vertical 75% color bars */
+/* Encoder test pattern 2 - full screen vertical 75% color bars */
# define TV_TEST_MODE_PATTERN_2 (2 << 0)
-/** Encoder test pattern 3 - full screen horizontal 75% color bars */
+/* Encoder test pattern 3 - full screen horizontal 75% color bars */
# define TV_TEST_MODE_PATTERN_3 (3 << 0)
-/** Encoder test pattern 4 - random noise */
+/* Encoder test pattern 4 - random noise */
# define TV_TEST_MODE_PATTERN_4 (4 << 0)
-/** Encoder test pattern 5 - linear color ramps */
+/* Encoder test pattern 5 - linear color ramps */
# define TV_TEST_MODE_PATTERN_5 (5 << 0)
-/**
+/*
* This test mode forces the DACs to 50% of full output.
*
* This is used for load detection in combination with TVDAC_SENSE_MASK
*/
# define TV_TEST_MODE_MONITOR_DETECT (7 << 0)
# define TV_TEST_MODE_MASK (7 << 0)
-/** @} */
+/* @} */
-/** @defgroup TV_DAC
+/* @defgroup TV_DAC
* @{
*/
#define TV_DAC 0x68004
-/**
+/*
* Reports that DAC state change logic has reported change (RO).
*
* This gets cleared when TV_DAC_STATE_EN is cleared
*/
# define TVDAC_STATE_CHG (1 << 31)
# define TVDAC_SENSE_MASK (7 << 28)
-/** Reports that DAC A voltage is above the detect threshold */
+/* Reports that DAC A voltage is above the detect threshold */
# define TVDAC_A_SENSE (1 << 30)
-/** Reports that DAC B voltage is above the detect threshold */
+/* Reports that DAC B voltage is above the detect threshold */
# define TVDAC_B_SENSE (1 << 29)
-/** Reports that DAC C voltage is above the detect threshold */
+/* Reports that DAC C voltage is above the detect threshold */
# define TVDAC_C_SENSE (1 << 28)
-/**
+/*
* Enables DAC state detection logic, for load-based TV detection.
*
* The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set
* to off, for load detection to work.
*/
# define TVDAC_STATE_CHG_EN (1 << 27)
-/** Sets the DAC A sense value to high */
+/* Sets the DAC A sense value to high */
# define TVDAC_A_SENSE_CTL (1 << 26)
-/** Sets the DAC B sense value to high */
+/* Sets the DAC B sense value to high */
# define TVDAC_B_SENSE_CTL (1 << 25)
-/** Sets the DAC C sense value to high */
+/* Sets the DAC C sense value to high */
# define TVDAC_C_SENSE_CTL (1 << 24)
-/** Overrides the ENC_ENABLE and DAC voltage levels */
+/* Overrides the ENC_ENABLE and DAC voltage levels */
# define DAC_CTL_OVERRIDE (1 << 7)
-/** Sets the slew rate. Must be preserved in software */
+/* Sets the slew rate. Must be preserved in software */
# define ENC_TVDAC_SLEW_FAST (1 << 6)
# define DAC_A_1_3_V (0 << 4)
# define DAC_A_1_1_V (1 << 4)
@@ -1678,11 +1678,11 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
# define DAC_C_1_1_V (1 << 0)
# define DAC_C_0_7_V (2 << 0)
# define DAC_C_OFF (3 << 0)
-/** @} */
+/* @} */
-/**
+/*
* CSC coefficients are stored in a floating point format with 9 bits of
- * mantissa and 2 or 3 bits of exponent. The exponent is represented as 2**-n,
+ * mantissa and 2 or 3 bits of exponent. The exponent is represented as 2*-n,
* where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with
* -1 (0x3) being the only legal negative value.
*/
@@ -1695,7 +1695,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define TV_CSC_Y2 0x68014
# define TV_BY_MASK 0x07ff0000
# define TV_BY_SHIFT 16
-/**
+/*
* Y attenuation for component video.
*
* Stored in 1.9 fixed point.
@@ -1712,7 +1712,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define TV_CSC_U2 0x6801c
# define TV_BU_MASK 0x07ff0000
# define TV_BU_SHIFT 16
-/**
+/*
* U attenuation for component video.
*
* Stored in 1.9 fixed point.
@@ -1729,7 +1729,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define TV_CSC_V2 0x68024
# define TV_BV_MASK 0x07ff0000
# define TV_BV_SHIFT 16
-/**
+/*
* V attenuation for component video.
*
* Stored in 1.9 fixed point.
@@ -1737,307 +1737,307 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
# define TV_AV_MASK 0x000007ff
# define TV_AV_SHIFT 0
-/** @defgroup TV_CSC_KNOBS
+/* @defgroup TV_CSC_KNOBS
* @{
*/
#define TV_CLR_KNOBS 0x68028
-/** 2s-complement brightness adjustment */
+/* 2s-complement brightness adjustment */
# define TV_BRIGHTNESS_MASK 0xff000000
# define TV_BRIGHTNESS_SHIFT 24
-/** Contrast adjustment, as a 2.6 unsigned floating point number */
+/* Contrast adjustment, as a 2.6 unsigned floating point number */
# define TV_CONTRAST_MASK 0x00ff0000
# define TV_CONTRAST_SHIFT 16
-/** Saturation adjustment, as a 2.6 unsigned floating point number */
+/* Saturation adjustment, as a 2.6 unsigned floating point number */
# define TV_SATURATION_MASK 0x0000ff00
# define TV_SATURATION_SHIFT 8
-/** Hue adjustment, as an integer phase angle in degrees */
+/* Hue adjustment, as an integer phase angle in degrees */
# define TV_HUE_MASK 0x000000ff
# define TV_HUE_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_CLR_LEVEL
+/* @defgroup TV_CLR_LEVEL
* @{
*/
#define TV_CLR_LEVEL 0x6802c
-/** Controls the DAC level for black */
+/* Controls the DAC level for black */
# define TV_BLACK_LEVEL_MASK 0x01ff0000
# define TV_BLACK_LEVEL_SHIFT 16
-/** Controls the DAC level for blanking */
+/* Controls the DAC level for blanking */
# define TV_BLANK_LEVEL_MASK 0x000001ff
# define TV_BLANK_LEVEL_SHIFT 0
/* @} */
-/** @defgroup TV_H_CTL_1
+/* @defgroup TV_H_CTL_1
* @{
*/
#define TV_H_CTL_1 0x68030
-/** Number of pixels in the hsync. */
+/* Number of pixels in the hsync. */
# define TV_HSYNC_END_MASK 0x1fff0000
# define TV_HSYNC_END_SHIFT 16
-/** Total number of pixels minus one in the line (display and blanking). */
+/* Total number of pixels minus one in the line (display and blanking). */
# define TV_HTOTAL_MASK 0x00001fff
# define TV_HTOTAL_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_H_CTL_2
+/* @defgroup TV_H_CTL_2
* @{
*/
#define TV_H_CTL_2 0x68034
-/** Enables the colorburst (needed for non-component color) */
+/* Enables the colorburst (needed for non-component color) */
# define TV_BURST_ENA (1 << 31)
-/** Offset of the colorburst from the start of hsync, in pixels minus one. */
+/* Offset of the colorburst from the start of hsync, in pixels minus one. */
# define TV_HBURST_START_SHIFT 16
# define TV_HBURST_START_MASK 0x1fff0000
-/** Length of the colorburst */
+/* Length of the colorburst */
# define TV_HBURST_LEN_SHIFT 0
# define TV_HBURST_LEN_MASK 0x0001fff
-/** @} */
+/* @} */
-/** @defgroup TV_H_CTL_3
+/* @defgroup TV_H_CTL_3
* @{
*/
#define TV_H_CTL_3 0x68038
-/** End of hblank, measured in pixels minus one from start of hsync */
+/* End of hblank, measured in pixels minus one from start of hsync */
# define TV_HBLANK_END_SHIFT 16
# define TV_HBLANK_END_MASK 0x1fff0000
-/** Start of hblank, measured in pixels minus one from start of hsync */
+/* Start of hblank, measured in pixels minus one from start of hsync */
# define TV_HBLANK_START_SHIFT 0
# define TV_HBLANK_START_MASK 0x0001fff
-/** @} */
+/* @} */
-/** @defgroup TV_V_CTL_1
+/* @defgroup TV_V_CTL_1
* @{
*/
#define TV_V_CTL_1 0x6803c
-/** XXX */
+/* XXX */
# define TV_NBR_END_SHIFT 16
# define TV_NBR_END_MASK 0x07ff0000
-/** XXX */
+/* XXX */
# define TV_VI_END_F1_SHIFT 8
# define TV_VI_END_F1_MASK 0x00003f00
-/** XXX */
+/* XXX */
# define TV_VI_END_F2_SHIFT 0
# define TV_VI_END_F2_MASK 0x0000003f
-/** @} */
+/* @} */
-/** @defgroup TV_V_CTL_2
+/* @defgroup TV_V_CTL_2
* @{
*/
#define TV_V_CTL_2 0x68040
-/** Length of vsync, in half lines */
+/* Length of vsync, in half lines */
# define TV_VSYNC_LEN_MASK 0x07ff0000
# define TV_VSYNC_LEN_SHIFT 16
-/** Offset of the start of vsync in field 1, measured in one less than the
+/* Offset of the start of vsync in field 1, measured in one less than the
* number of half lines.
*/
# define TV_VSYNC_START_F1_MASK 0x00007f00
# define TV_VSYNC_START_F1_SHIFT 8
-/**
+/*
* Offset of the start of vsync in field 2, measured in one less than the
* number of half lines.
*/
# define TV_VSYNC_START_F2_MASK 0x0000007f
# define TV_VSYNC_START_F2_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_V_CTL_3
+/* @defgroup TV_V_CTL_3
* @{
*/
#define TV_V_CTL_3 0x68044
-/** Enables generation of the equalization signal */
+/* Enables generation of the equalization signal */
# define TV_EQUAL_ENA (1 << 31)
-/** Length of vsync, in half lines */
+/* Length of vsync, in half lines */
# define TV_VEQ_LEN_MASK 0x007f0000
# define TV_VEQ_LEN_SHIFT 16
-/** Offset of the start of equalization in field 1, measured in one less than
+/* Offset of the start of equalization in field 1, measured in one less than
* the number of half lines.
*/
# define TV_VEQ_START_F1_MASK 0x0007f00
# define TV_VEQ_START_F1_SHIFT 8
-/**
+/*
* Offset of the start of equalization in field 2, measured in one less than
* the number of half lines.
*/
# define TV_VEQ_START_F2_MASK 0x000007f
# define TV_VEQ_START_F2_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_V_CTL_4
+/* @defgroup TV_V_CTL_4
* @{
*/
#define TV_V_CTL_4 0x68048
-/**
+/*
* Offset to start of vertical colorburst, measured in one less than the
* number of lines from vertical start.
*/
# define TV_VBURST_START_F1_MASK 0x003f0000
# define TV_VBURST_START_F1_SHIFT 16
-/**
+/*
* Offset to the end of vertical colorburst, measured in one less than the
* number of lines from the start of NBR.
*/
# define TV_VBURST_END_F1_MASK 0x000000ff
# define TV_VBURST_END_F1_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_V_CTL_5
+/* @defgroup TV_V_CTL_5
* @{
*/
#define TV_V_CTL_5 0x6804c
-/**
+/*
* Offset to start of vertical colorburst, measured in one less than the
* number of lines from vertical start.
*/
# define TV_VBURST_START_F2_MASK 0x003f0000
# define TV_VBURST_START_F2_SHIFT 16
-/**
+/*
* Offset to the end of vertical colorburst, measured in one less than the
* number of lines from the start of NBR.
*/
# define TV_VBURST_END_F2_MASK 0x000000ff
# define TV_VBURST_END_F2_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_V_CTL_6
+/* @defgroup TV_V_CTL_6
* @{
*/
#define TV_V_CTL_6 0x68050
-/**
+/*
* Offset to start of vertical colorburst, measured in one less than the
* number of lines from vertical start.
*/
# define TV_VBURST_START_F3_MASK 0x003f0000
# define TV_VBURST_START_F3_SHIFT 16
-/**
+/*
* Offset to the end of vertical colorburst, measured in one less than the
* number of lines from the start of NBR.
*/
# define TV_VBURST_END_F3_MASK 0x000000ff
# define TV_VBURST_END_F3_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_V_CTL_7
+/* @defgroup TV_V_CTL_7
* @{
*/
#define TV_V_CTL_7 0x68054
-/**
+/*
* Offset to start of vertical colorburst, measured in one less than the
* number of lines from vertical start.
*/
# define TV_VBURST_START_F4_MASK 0x003f0000
# define TV_VBURST_START_F4_SHIFT 16
-/**
+/*
* Offset to the end of vertical colorburst, measured in one less than the
* number of lines from the start of NBR.
*/
# define TV_VBURST_END_F4_MASK 0x000000ff
# define TV_VBURST_END_F4_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_SC_CTL_1
+/* @defgroup TV_SC_CTL_1
* @{
*/
#define TV_SC_CTL_1 0x68060
-/** Turns on the first subcarrier phase generation DDA */
+/* Turns on the first subcarrier phase generation DDA */
# define TV_SC_DDA1_EN (1 << 31)
-/** Turns on the first subcarrier phase generation DDA */
+/* Turns on the first subcarrier phase generation DDA */
# define TV_SC_DDA2_EN (1 << 30)
-/** Turns on the first subcarrier phase generation DDA */
+/* Turns on the first subcarrier phase generation DDA */
# define TV_SC_DDA3_EN (1 << 29)
-/** Sets the subcarrier DDA to reset frequency every other field */
+/* Sets the subcarrier DDA to reset frequency every other field */
# define TV_SC_RESET_EVERY_2 (0 << 24)
-/** Sets the subcarrier DDA to reset frequency every fourth field */
+/* Sets the subcarrier DDA to reset frequency every fourth field */
# define TV_SC_RESET_EVERY_4 (1 << 24)
-/** Sets the subcarrier DDA to reset frequency every eighth field */
+/* Sets the subcarrier DDA to reset frequency every eighth field */
# define TV_SC_RESET_EVERY_8 (2 << 24)
-/** Sets the subcarrier DDA to never reset the frequency */
+/* Sets the subcarrier DDA to never reset the frequency */
# define TV_SC_RESET_NEVER (3 << 24)
-/** Sets the peak amplitude of the colorburst.*/
+/* Sets the peak amplitude of the colorburst.*/
# define TV_BURST_LEVEL_MASK 0x00ff0000
# define TV_BURST_LEVEL_SHIFT 16
-/** Sets the increment of the first subcarrier phase generation DDA */
+/* Sets the increment of the first subcarrier phase generation DDA */
# define TV_SCDDA1_INC_MASK 0x00000fff
# define TV_SCDDA1_INC_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_SC_CTL_2
+/* @defgroup TV_SC_CTL_2
* @{
*/
#define TV_SC_CTL_2 0x68064
-/** Sets the rollover for the second subcarrier phase generation DDA */
+/* Sets the rollover for the second subcarrier phase generation DDA */
# define TV_SCDDA2_SIZE_MASK 0x7fff0000
# define TV_SCDDA2_SIZE_SHIFT 16
-/** Sets the increent of the second subcarrier phase generation DDA */
+/* Sets the increent of the second subcarrier phase generation DDA */
# define TV_SCDDA2_INC_MASK 0x00007fff
# define TV_SCDDA2_INC_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_SC_CTL_3
+/* @defgroup TV_SC_CTL_3
* @{
*/
#define TV_SC_CTL_3 0x68068
-/** Sets the rollover for the third subcarrier phase generation DDA */
+/* Sets the rollover for the third subcarrier phase generation DDA */
# define TV_SCDDA3_SIZE_MASK 0x7fff0000
# define TV_SCDDA3_SIZE_SHIFT 16
-/** Sets the increent of the third subcarrier phase generation DDA */
+/* Sets the increent of the third subcarrier phase generation DDA */
# define TV_SCDDA3_INC_MASK 0x00007fff
# define TV_SCDDA3_INC_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_WIN_POS
+/* @defgroup TV_WIN_POS
* @{
*/
#define TV_WIN_POS 0x68070
-/** X coordinate of the display from the start of horizontal active */
+/* X coordinate of the display from the start of horizontal active */
# define TV_XPOS_MASK 0x1fff0000
# define TV_XPOS_SHIFT 16
-/** Y coordinate of the display from the start of vertical active (NBR) */
+/* Y coordinate of the display from the start of vertical active (NBR) */
# define TV_YPOS_MASK 0x00000fff
# define TV_YPOS_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_WIN_SIZE
+/* @defgroup TV_WIN_SIZE
* @{
*/
#define TV_WIN_SIZE 0x68074
-/** Horizontal size of the display window, measured in pixels*/
+/* Horizontal size of the display window, measured in pixels*/
# define TV_XSIZE_MASK 0x1fff0000
# define TV_XSIZE_SHIFT 16
-/**
+/*
* Vertical size of the display window, measured in pixels.
*
* Must be even for interlaced modes.
*/
# define TV_YSIZE_MASK 0x00000fff
# define TV_YSIZE_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_FILTER_CTL_1
+/* @defgroup TV_FILTER_CTL_1
* @{
*/
#define TV_FILTER_CTL_1 0x68080
-/**
+/*
* Enables automatic scaling calculation.
*
* If set, the rest of the registers are ignored, and the calculated values can
* be read back from the register.
*/
# define TV_AUTO_SCALE (1 << 31)
-/**
+/*
* Disables the vertical filter.
*
* This is required on modes more than 1024 pixels wide */
# define TV_V_FILTER_BYPASS (1 << 29)
-/** Enables adaptive vertical filtering */
+/* Enables adaptive vertical filtering */
# define TV_VADAPT (1 << 28)
# define TV_VADAPT_MODE_MASK (3 << 26)
-/** Selects the least adaptive vertical filtering mode */
+/* Selects the least adaptive vertical filtering mode */
# define TV_VADAPT_MODE_LEAST (0 << 26)
-/** Selects the moderately adaptive vertical filtering mode */
+/* Selects the moderately adaptive vertical filtering mode */
# define TV_VADAPT_MODE_MODERATE (1 << 26)
-/** Selects the most adaptive vertical filtering mode */
+/* Selects the most adaptive vertical filtering mode */
# define TV_VADAPT_MODE_MOST (3 << 26)
-/**
+/*
* Sets the horizontal scaling factor.
*
* This should be the fractional part of the horizontal scaling factor divided
@@ -2047,33 +2047,33 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
# define TV_HSCALE_FRAC_MASK 0x00003fff
# define TV_HSCALE_FRAC_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_FILTER_CTL_2
+/* @defgroup TV_FILTER_CTL_2
* @{
*/
#define TV_FILTER_CTL_2 0x68084
-/**
+/*
* Sets the integer part of the 3.15 fixed-point vertical scaling factor.
*
* TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1)
*/
# define TV_VSCALE_INT_MASK 0x00038000
# define TV_VSCALE_INT_SHIFT 15
-/**
+/*
* Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
*
* \sa TV_VSCALE_INT_MASK
*/
# define TV_VSCALE_FRAC_MASK 0x00007fff
# define TV_VSCALE_FRAC_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_FILTER_CTL_3
+/* @defgroup TV_FILTER_CTL_3
* @{
*/
#define TV_FILTER_CTL_3 0x68088
-/**
+/*
* Sets the integer part of the 3.15 fixed-point vertical scaling factor.
*
* TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1))
@@ -2082,7 +2082,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
# define TV_VSCALE_IP_INT_MASK 0x00038000
# define TV_VSCALE_IP_INT_SHIFT 15
-/**
+/*
* Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
*
* For progressive modes, TV_VSCALE_IP_INT should be set to zeroes.
@@ -2091,43 +2091,43 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
# define TV_VSCALE_IP_FRAC_MASK 0x00007fff
# define TV_VSCALE_IP_FRAC_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_CC_CONTROL
+/* @defgroup TV_CC_CONTROL
* @{
*/
#define TV_CC_CONTROL 0x68090
# define TV_CC_ENABLE (1 << 31)
-/**
+/*
* Specifies which field to send the CC data in.
*
* CC data is usually sent in field 0.
*/
# define TV_CC_FID_MASK (1 << 27)
# define TV_CC_FID_SHIFT 27
-/** Sets the horizontal position of the CC data. Usually 135. */
+/* Sets the horizontal position of the CC data. Usually 135. */
# define TV_CC_HOFF_MASK 0x03ff0000
# define TV_CC_HOFF_SHIFT 16
-/** Sets the vertical position of the CC data. Usually 21 */
+/* Sets the vertical position of the CC data. Usually 21 */
# define TV_CC_LINE_MASK 0x0000003f
# define TV_CC_LINE_SHIFT 0
-/** @} */
+/* @} */
-/** @defgroup TV_CC_DATA
+/* @defgroup TV_CC_DATA
* @{
*/
#define TV_CC_DATA 0x68094
# define TV_CC_RDY (1 << 31)
-/** Second word of CC data to be transmitted. */
+/* Second word of CC data to be transmitted. */
# define TV_CC_DATA_2_MASK 0x007f0000
# define TV_CC_DATA_2_SHIFT 16
-/** First word of CC data to be transmitted. */
+/* First word of CC data to be transmitted. */
# define TV_CC_DATA_1_MASK 0x0000007f
# define TV_CC_DATA_1_SHIFT 0
-/** @}
+/* @}
*/
-/** @{ */
+/* @{ */
#define TV_H_LUMA_0 0x68100
#define TV_H_LUMA_59 0x681ec
#define TV_H_CHROMA_0 0x68200
@@ -2136,7 +2136,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define TV_V_LUMA_42 0x683a8
#define TV_V_CHROMA_0 0x68400
#define TV_V_CHROMA_42 0x684a8
-/** @} */
+/* @} */
#define PIPEA_DSL 0x70000
@@ -286,7 +286,7 @@ gen8_fill_ps(struct intel_batchbuffer *batch,
return offset;
}
-/**
+/*
* gen7_fill_vertex_buffer_data populate vertex buffer with data.
*
* The vertex buffer consists of 3 vertices to construct a RECTLIST. The 4th
@@ -327,7 +327,7 @@ gen7_fill_vertex_buffer_data(struct intel_batchbuffer *batch,
return offset;
}
-/**
+/*
* gen6_emit_vertex_elements - The vertex elements describe the contents of the
* vertex buffer. We pack the vertex buffer in a semi weird way, conforming to
* what gen6_rendercopy did. The most straightforward would be to store
@@ -384,7 +384,7 @@ gen6_emit_vertex_elements(struct intel_batchbuffer *batch) {
GEN6_VFCOMPONENT_STORE_1_FLT << VE1_VFCOMPONENT_3_SHIFT);
}
-/**
+/*
* gen7_emit_vertex_buffer emit the vertex buffers command
*
* @batch
These comments are not gtk-doc comments, so replacing /** with /* prevents any gtk-doc warnings. Signed-off-by: Thomas Wood <thomas.wood@intel.com> --- lib/i915_3d.h | 26 ++-- lib/intel_reg.h | 404 +++++++++++++++++++++++++------------------------- lib/rendercopy_gen8.c | 6 +- 3 files changed, 218 insertions(+), 218 deletions(-)