diff mbox

[v4] drm/i915/ppgtt: Load address space after mi_set_context

Message ID 1410773387-24682-1-git-send-email-michel.thierry@intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Michel Thierry Sept. 15, 2014, 9:29 a.m. UTC
From: Ben Widawsky <benjamin.widawsky@intel.com>

The simple explanation is, the docs say to do this for GEN8. Perhaps we
want to do this for GEN7 too, I am not certain.

PDPs are saved and restored with context. Contexts (without execlists)
only exist on the render ring. The docs say that PDPs are not power
context save/restored.  I've learned that this actually means something
which SW doesn't care about. So pretend the statement doesn't exist.
For non RCS, nothing changes.

All this patch now does is change the ordering of LRI vs MI_SET_CONTEXT
for the initialization of the context. I do this because the docs say to
do it, and frankly, I cannot reason why it is necessary. I've thought
about it a lot, and tried, without success, to get a reason from design.
The answer I got more or less says, "gen7 is different than gen8." I've
given up, and am adding this little bit of code to make it in sync with
the docs.

v2: Completely rewritten commit message that addresses the requests
Ville made for v1
Only load PDPs for initial context load (Ville)

v3: Rebased after ppgtt clean-up rules, and apply only for render
ring. This is needed to boot to desktop with full ppgtt in legacy mode
(without execlists).

v4: Clean up the pre/post load logic (Ville).

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3-4)
---
 drivers/gpu/drm/i915/i915_gem_context.c | 32 ++++++++++++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)

Comments

Chris Wilson Sept. 15, 2014, 9:42 a.m. UTC | #1
On Mon, Sep 15, 2014 at 10:29:47AM +0100, Michel Thierry wrote:
> From: Ben Widawsky <benjamin.widawsky@intel.com>
> 
> The simple explanation is, the docs say to do this for GEN8. Perhaps we
> want to do this for GEN7 too, I am not certain.
> 
> PDPs are saved and restored with context. Contexts (without execlists)
> only exist on the render ring. The docs say that PDPs are not power
> context save/restored.  I've learned that this actually means something
> which SW doesn't care about. So pretend the statement doesn't exist.
> For non RCS, nothing changes.
> 
> All this patch now does is change the ordering of LRI vs MI_SET_CONTEXT
> for the initialization of the context. I do this because the docs say to
> do it, and frankly, I cannot reason why it is necessary. I've thought
> about it a lot, and tried, without success, to get a reason from design.
> The answer I got more or less says, "gen7 is different than gen8." I've
> given up, and am adding this little bit of code to make it in sync with
> the docs.
> 
> v2: Completely rewritten commit message that addresses the requests
> Ville made for v1
> Only load PDPs for initial context load (Ville)
> 
> v3: Rebased after ppgtt clean-up rules, and apply only for render
> ring. This is needed to boot to desktop with full ppgtt in legacy mode
> (without execlists).
> 
> v4: Clean up the pre/post load logic (Ville).
> 
> Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3-4)
> ---
>  drivers/gpu/drm/i915/i915_gem_context.c | 32 ++++++++++++++++++++++++++++++--
>  1 file changed, 30 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c
> index a5221d8..7b73b36 100644
> --- a/drivers/gpu/drm/i915/i915_gem_context.c
> +++ b/drivers/gpu/drm/i915/i915_gem_context.c
> @@ -522,6 +522,9 @@ static int do_switch(struct intel_engine_cs *ring,
>  	struct intel_context *from = ring->last_context;
>  	u32 hw_flags = 0;
>  	bool uninitialized = false;
> +	bool needs_pd_load_pre = ((INTEL_INFO(ring->dev)->gen < 8) ||
> +			(ring != &dev_priv->ring[RCS])) && to->ppgtt;
> +	bool needs_pd_load_post = false;
>  	int ret, i;
>  
>  	if (from != NULL && ring == &dev_priv->ring[RCS]) {
> @@ -547,7 +550,11 @@ static int do_switch(struct intel_engine_cs *ring,
>  	 */
>  	from = ring->last_context;
>  
> -	if (to->ppgtt) {
> +	if (needs_pd_load_pre) {
> +		/* Older GENs and non render rings still want the load first,
> +		 * "PP_DCLV followed by PP_DIR_BASE register through Load
> +		 * Register Immediate commands in Ring Buffer before submitting
> +		 * a context."*/

What's the reference for this? It works if you load the ppgtt after the
set_context on ivb/byt/hsw, so do you have a specific recommendation in
mind? And the set-context even provides the barrier required for the lri.

>  		ret = to->ppgtt->switch_mm(to->ppgtt, ring);
>  		if (ret)
>  			goto unpin_out;
> @@ -577,13 +584,34 @@ static int do_switch(struct intel_engine_cs *ring,
>  		vma->bind_vma(vma, to->legacy_hw_ctx.rcs_state->cache_level, GLOBAL_BIND);
>  	}
>  
> -	if (!to->legacy_hw_ctx.initialized || i915_gem_context_is_default(to))
> +	/* GEN8 does *not* require an explicit reload if the PDPs have been
> +	 * setup, and we do not wish to move them.
> +	 *
> +	 * XXX: If we implemented page directory eviction code, this
> +	 * optimization needs to be removed.
> +	 */

What is the cost of the pde invalidate on top of the context restore
anyway? As this will be a secondary path in future, is optimizing
worthwhile at all?

> +	if (!to->legacy_hw_ctx.initialized || i915_gem_context_is_default(to)) {
>  		hw_flags |= MI_RESTORE_INHIBIT;
> +		needs_pd_load_post = to->ppgtt && IS_GEN8(ring->dev);
> +	}
>  
>  	ret = mi_set_context(ring, to, hw_flags);
>  	if (ret)
>  		goto unpin_out;
>  
> +	if (needs_pd_load_post) {
> +		ret = to->ppgtt->switch_mm(to->ppgtt, ring);
> +		/* The hardware context switch is emitted, but we haven't
> +		 * actually changed the state - so it's probably safe to bail
> +		 * here. Still, let the user know something dangerous has
> +		 * happened.
> +		 */

Imagine if we only had patches posted already to fix all of this up.
-Chris
Wang, Zhi A Sept. 23, 2014, 6:58 a.m. UTC | #2
Hi Michel:
     I'm doing a task which require LRIs to load root pointer around RCS 
context switch.My BDW CPU is C stepping. And what I found is 
MI_SET_CONTEXT instruction will save/restore PDP0/1/2/3. It's weired 
that as part of EXECLIST context, the "EXECLIST PPGTT base" context also 
appear in the dump generated by MI_SET_CONTEXT.

And I found LRI after MI_SET_CONTEXT will make ring not idle: 0x8000[0] 
!= 1. By the way, if MI_SET_CONTEXT is issued very frequently. I also 
found that will make ring not idle: INSTDONE register shows VFE and TSG 
not done.

Do you met these issues? Thanks.

Thanks,
Zhi.

> -------- Original Message --------
> Subject: [Intel-gfx] [PATCH v4] drm/i915/ppgtt: Load address space after
> mi_set_context
> Date: Mon, 15 Sep 2014 10:29:47 +0100
> From: Michel Thierry <michel.thierry@intel.com>
> To: <intel-gfx@lists.freedesktop.org>
>
> From: Ben Widawsky <benjamin.widawsky@intel.com>
>
> The simple explanation is, the docs say to do this for GEN8. Perhaps we
> want to do this for GEN7 too, I am not certain.
>
> PDPs are saved and restored with context. Contexts (without execlists)
> only exist on the render ring. The docs say that PDPs are not power
> context save/restored.  I've learned that this actually means something
> which SW doesn't care about. So pretend the statement doesn't exist.
> For non RCS, nothing changes.
>
> All this patch now does is change the ordering of LRI vs MI_SET_CONTEXT
> for the initialization of the context. I do this because the docs say to
> do it, and frankly, I cannot reason why it is necessary. I've thought
> about it a lot, and tried, without success, to get a reason from design.
> The answer I got more or less says, "gen7 is different than gen8." I've
> given up, and am adding this little bit of code to make it in sync with
> the docs.
>
> v2: Completely rewritten commit message that addresses the requests
> Ville made for v1
> Only load PDPs for initial context load (Ville)
>
> v3: Rebased after ppgtt clean-up rules, and apply only for render
> ring. This is needed to boot to desktop with full ppgtt in legacy mode
> (without execlists).
>
> v4: Clean up the pre/post load logic (Ville).
>
> Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3-4)
> ---
>   drivers/gpu/drm/i915/i915_gem_context.c | 32
> ++++++++++++++++++++++++++++++--
>   1 file changed, 30 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_gem_context.c
> b/drivers/gpu/drm/i915/i915_gem_context.c
> index a5221d8..7b73b36 100644
> --- a/drivers/gpu/drm/i915/i915_gem_context.c
> +++ b/drivers/gpu/drm/i915/i915_gem_context.c
> @@ -522,6 +522,9 @@ static int do_switch(struct intel_engine_cs *ring,
>       struct intel_context *from = ring->last_context;
>       u32 hw_flags = 0;
>       bool uninitialized = false;
> +    bool needs_pd_load_pre = ((INTEL_INFO(ring->dev)->gen < 8) ||
> +            (ring != &dev_priv->ring[RCS])) && to->ppgtt;
> +    bool needs_pd_load_post = false;
>       int ret, i;
>
>       if (from != NULL && ring == &dev_priv->ring[RCS]) {
> @@ -547,7 +550,11 @@ static int do_switch(struct intel_engine_cs *ring,
>        */
>       from = ring->last_context;
>
> -    if (to->ppgtt) {
> +    if (needs_pd_load_pre) {
> +        /* Older GENs and non render rings still want the load first,
> +         * "PP_DCLV followed by PP_DIR_BASE register through Load
> +         * Register Immediate commands in Ring Buffer before submitting
> +         * a context."*/
>           ret = to->ppgtt->switch_mm(to->ppgtt, ring);
>           if (ret)
>               goto unpin_out;
> @@ -577,13 +584,34 @@ static int do_switch(struct intel_engine_cs *ring,
>           vma->bind_vma(vma, to->legacy_hw_ctx.rcs_state->cache_level,
> GLOBAL_BIND);
>       }
>
> -    if (!to->legacy_hw_ctx.initialized || i915_gem_context_is_default(to))
> +    /* GEN8 does *not* require an explicit reload if the PDPs have been
> +     * setup, and we do not wish to move them.
> +     *
> +     * XXX: If we implemented page directory eviction code, this
> +     * optimization needs to be removed.
> +     */
> +    if (!to->legacy_hw_ctx.initialized ||
> i915_gem_context_is_default(to)) {
>           hw_flags |= MI_RESTORE_INHIBIT;
> +        needs_pd_load_post = to->ppgtt && IS_GEN8(ring->dev);
> +    }
>
>       ret = mi_set_context(ring, to, hw_flags);
>       if (ret)
>           goto unpin_out;
>
> +    if (needs_pd_load_post) {
> +        ret = to->ppgtt->switch_mm(to->ppgtt, ring);
> +        /* The hardware context switch is emitted, but we haven't
> +         * actually changed the state - so it's probably safe to bail
> +         * here. Still, let the user know something dangerous has
> +         * happened.
> +         */
> +        if (ret) {
> +            DRM_ERROR("Failed to change address space on context
> switch\n");
> +            goto unpin_out;
> +        }
> +    }
> +
>       for (i = 0; i < MAX_L3_SLICES; i++) {
>           if (!(to->remap_slice & (1<<i)))
>               continue;
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c
index a5221d8..7b73b36 100644
--- a/drivers/gpu/drm/i915/i915_gem_context.c
+++ b/drivers/gpu/drm/i915/i915_gem_context.c
@@ -522,6 +522,9 @@  static int do_switch(struct intel_engine_cs *ring,
 	struct intel_context *from = ring->last_context;
 	u32 hw_flags = 0;
 	bool uninitialized = false;
+	bool needs_pd_load_pre = ((INTEL_INFO(ring->dev)->gen < 8) ||
+			(ring != &dev_priv->ring[RCS])) && to->ppgtt;
+	bool needs_pd_load_post = false;
 	int ret, i;
 
 	if (from != NULL && ring == &dev_priv->ring[RCS]) {
@@ -547,7 +550,11 @@  static int do_switch(struct intel_engine_cs *ring,
 	 */
 	from = ring->last_context;
 
-	if (to->ppgtt) {
+	if (needs_pd_load_pre) {
+		/* Older GENs and non render rings still want the load first,
+		 * "PP_DCLV followed by PP_DIR_BASE register through Load
+		 * Register Immediate commands in Ring Buffer before submitting
+		 * a context."*/
 		ret = to->ppgtt->switch_mm(to->ppgtt, ring);
 		if (ret)
 			goto unpin_out;
@@ -577,13 +584,34 @@  static int do_switch(struct intel_engine_cs *ring,
 		vma->bind_vma(vma, to->legacy_hw_ctx.rcs_state->cache_level, GLOBAL_BIND);
 	}
 
-	if (!to->legacy_hw_ctx.initialized || i915_gem_context_is_default(to))
+	/* GEN8 does *not* require an explicit reload if the PDPs have been
+	 * setup, and we do not wish to move them.
+	 *
+	 * XXX: If we implemented page directory eviction code, this
+	 * optimization needs to be removed.
+	 */
+	if (!to->legacy_hw_ctx.initialized || i915_gem_context_is_default(to)) {
 		hw_flags |= MI_RESTORE_INHIBIT;
+		needs_pd_load_post = to->ppgtt && IS_GEN8(ring->dev);
+	}
 
 	ret = mi_set_context(ring, to, hw_flags);
 	if (ret)
 		goto unpin_out;
 
+	if (needs_pd_load_post) {
+		ret = to->ppgtt->switch_mm(to->ppgtt, ring);
+		/* The hardware context switch is emitted, but we haven't
+		 * actually changed the state - so it's probably safe to bail
+		 * here. Still, let the user know something dangerous has
+		 * happened.
+		 */
+		if (ret) {
+			DRM_ERROR("Failed to change address space on context switch\n");
+			goto unpin_out;
+		}
+	}
+
 	for (i = 0; i < MAX_L3_SLICES; i++) {
 		if (!(to->remap_slice & (1<<i)))
 			continue;