@@ -2938,6 +2938,35 @@ unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane,
return i915_gem_obj_ggtt_offset_view(obj, view);
}
+/*
+ * This function detaches (aka. unbinds) unused scalers in hardware
+ */
+void skl_detach_scalers(struct intel_crtc *intel_crtc)
+{
+ struct drm_device *dev;
+ struct drm_i915_private *dev_priv;
+ struct intel_crtc_scaler_state *scaler_state;
+ int i;
+
+ if (!intel_crtc || !intel_crtc->config)
+ return;
+
+ dev = intel_crtc->base.dev;
+ dev_priv = dev->dev_private;
+ scaler_state = &intel_crtc->config->scaler_state;
+
+ /* loop through and disable scalers that aren't in use */
+ for (i = 0; i < intel_crtc->num_scalers; i++) {
+ if (!scaler_state->scalers[i].in_use) {
+ I915_WRITE(SKL_PS_CTRL(intel_crtc->pipe, i), 0);
+ I915_WRITE(SKL_PS_WIN_POS(intel_crtc->pipe, i), 0);
+ I915_WRITE(SKL_PS_WIN_SZ(intel_crtc->pipe, i), 0);
+ DRM_DEBUG_KMS("CRTC:%d Disabled scaler id %u.%u\n",
+ intel_crtc->base.base.id, intel_crtc->pipe, i);
+ }
+ }
+}
+
static void skylake_update_primary_plane(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int x, int y)
@@ -4253,16 +4282,175 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe)
}
}
-static void skylake_pfit_enable(struct intel_crtc *crtc)
+/**
+ * skl_update_scaler_users - Stages update to crtc's scaler state
+ * @intel_crtc: crtc
+ * @crtc_state: crtc_state
+ * @plane: plane (NULL indicates crtc is requesting update)
+ * @plane_state: plane's state
+ * @force_detach: request unconditional detachment of scaler
+ *
+ * This function updates scaler state for requested plane or crtc.
+ * To request scaler usage update for a plane, caller shall pass plane pointer.
+ * To request scaler usage update for crtc, caller shall pass plane pointer
+ * as NULL.
+ *
+ * Return
+ * 0 - scaler_usage updated successfully
+ * error - requested scaling cannot be supported or other error condition
+ */
+int
+skl_update_scaler_users(
+ struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state,
+ struct intel_plane *intel_plane, struct intel_plane_state *plane_state,
+ int force_detach)
+{
+ int need_scaling;
+ int idx;
+ int src_w, src_h, dst_w, dst_h;
+ int *scaler_id;
+ struct drm_framebuffer *fb;
+ struct intel_crtc_scaler_state *scaler_state;
+
+ if (!intel_crtc || !crtc_state)
+ return 0;
+
+ scaler_state = &crtc_state->scaler_state;
+
+ idx = intel_plane ? drm_plane_index(&intel_plane->base) : SKL_CRTC_INDEX;
+ fb = intel_plane ? plane_state->base.fb : NULL;
+
+ if (intel_plane) {
+ src_w = drm_rect_width(&plane_state->src) >> 16;
+ src_h = drm_rect_height(&plane_state->src) >> 16;
+ dst_w = drm_rect_width(&plane_state->dst);
+ dst_h = drm_rect_height(&plane_state->dst);
+ scaler_id = &plane_state->scaler_id;
+ } else {
+ struct drm_display_mode *adjusted_mode =
+ &crtc_state->base.adjusted_mode;
+ src_w = crtc_state->pipe_src_w;
+ src_h = crtc_state->pipe_src_h;
+ dst_w = adjusted_mode->hdisplay;
+ dst_h = adjusted_mode->vdisplay;
+ scaler_id = &scaler_state->scaler_id;
+ }
+ need_scaling = (src_w != dst_w || src_h != dst_h);
+
+ /*
+ * if plane is being disabled or scaler is no more required or force detach
+ * - free scaler binded to this plane/crtc
+ * - in order to do this, update crtc->scaler_usage
+ *
+ * Here scaler state in crtc_state is set free so that
+ * scaler can be assigned to other user. Actual register
+ * update to free the scaler is done in plane/panel-fit programming.
+ * For this purpose crtc/plane_state->scaler_id isn't reset here.
+ */
+ if (force_detach || !need_scaling || (intel_plane &&
+ (!fb || !plane_state->visible))) {
+ if (*scaler_id >= 0) {
+ scaler_state->scaler_users &= ~(1 << idx);
+ scaler_state->scalers[*scaler_id].in_use = 0;
+
+ DRM_DEBUG_KMS("Staged freeing scaler id %d.%d from %s:%d "
+ "crtc_state = %p scaler_users = 0x%x\n",
+ intel_crtc->pipe, *scaler_id, intel_plane ? "PLANE" : "CRTC",
+ intel_plane ? intel_plane->base.base.id :
+ intel_crtc->base.base.id, crtc_state,
+ scaler_state->scaler_users);
+ *scaler_id = -1;
+ }
+ return 0;
+ }
+
+ /* range checks */
+ if (src_w < SKL_MIN_SRC_W || src_h < SKL_MIN_SRC_H ||
+ dst_w < SKL_MIN_DST_W || dst_h < SKL_MIN_DST_H ||
+
+ src_w > SKL_MAX_SRC_W || src_h > SKL_MAX_SRC_H ||
+ dst_w > SKL_MAX_DST_W || dst_h > SKL_MAX_DST_H) {
+ DRM_DEBUG_KMS("%s:%d scaler_user index %u.%u: src %ux%u dst %ux%u "
+ "size is out of scaler range\n",
+ intel_plane ? "PLANE" : "CRTC",
+ intel_plane ? intel_plane->base.base.id : intel_crtc->base.base.id,
+ intel_crtc->pipe, idx, src_w, src_h, dst_w, dst_h);
+ return -EINVAL;
+ }
+
+ /* check colorkey */
+ if (intel_plane && intel_plane->ckey.flags != I915_SET_COLORKEY_NONE) {
+ DRM_DEBUG_KMS("PLANE:%d scaling with color key not allowed",
+ intel_plane->base.base.id);
+ return -EINVAL;
+ }
+
+ /* Check src format */
+ if (intel_plane) {
+ switch (fb->pixel_format) {
+ case DRM_FORMAT_RGB565:
+ case DRM_FORMAT_XBGR8888:
+ case DRM_FORMAT_XRGB8888:
+ case DRM_FORMAT_ABGR8888:
+ case DRM_FORMAT_ARGB8888:
+ case DRM_FORMAT_XRGB2101010:
+ case DRM_FORMAT_ARGB2101010:
+ case DRM_FORMAT_XBGR2101010:
+ case DRM_FORMAT_ABGR2101010:
+ case DRM_FORMAT_YUYV:
+ case DRM_FORMAT_YVYU:
+ case DRM_FORMAT_UYVY:
+ case DRM_FORMAT_VYUY:
+ break;
+ default:
+ DRM_DEBUG_KMS("PLANE:%d FB:%d unsupported scaling format 0x%x\n",
+ intel_plane->base.base.id, fb->base.id, fb->pixel_format);
+ return -EINVAL;
+ }
+ }
+
+ /* mark this plane as a scaler user in crtc_state */
+ scaler_state->scaler_users |= (1 << idx);
+ DRM_DEBUG_KMS("%s:%d staged scaling request for %ux%u->%ux%u "
+ "crtc_state = %p scaler_users = 0x%x\n",
+ intel_plane ? "PLANE" : "CRTC",
+ intel_plane ? intel_plane->base.base.id : intel_crtc->base.base.id,
+ src_w, src_h, dst_w, dst_h, crtc_state, scaler_state->scaler_users);
+ return 0;
+}
+
+static void skylake_pfit_update(struct intel_crtc *crtc, int enable)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe = crtc->pipe;
+ struct intel_crtc_scaler_state *scaler_state =
+ &crtc->config->scaler_state;
+
+ DRM_DEBUG_KMS("for crtc_state = %p\n", crtc->config);
+
+ /* To update pfit, first update scaler state */
+ skl_update_scaler_users(crtc, crtc->config, NULL, NULL, !enable);
+ intel_atomic_setup_scalers(crtc->base.dev, crtc, crtc->config);
+ skl_detach_scalers(crtc);
+ if (!enable)
+ return;
if (crtc->config->pch_pfit.enabled) {
- I915_WRITE(PS_CTL(pipe), PS_ENABLE);
- I915_WRITE(PS_WIN_POS(pipe), crtc->config->pch_pfit.pos);
- I915_WRITE(PS_WIN_SZ(pipe), crtc->config->pch_pfit.size);
+ int id;
+
+ if (WARN_ON(crtc->config->scaler_state.scaler_id < 0)) {
+ DRM_ERROR("Requesting pfit without getting a scaler first\n");
+ return;
+ }
+
+ id = scaler_state->scaler_id;
+ I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
+ PS_FILTER_MEDIUM | scaler_state->scalers[id].mode);
+ I915_WRITE(SKL_PS_WIN_POS(pipe, id), crtc->config->pch_pfit.pos);
+ I915_WRITE(SKL_PS_WIN_SZ(pipe, id), crtc->config->pch_pfit.size);
+
+ DRM_DEBUG_KMS("for crtc_state = %p scaler_id = %d\n", crtc->config, id);
}
}
@@ -4667,7 +4855,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
intel_ddi_enable_pipe_clock(intel_crtc);
if (IS_SKYLAKE(dev))
- skylake_pfit_enable(intel_crtc);
+ skylake_pfit_update(intel_crtc, 1);
else
ironlake_pfit_enable(intel_crtc);
@@ -4703,21 +4891,6 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
intel_crtc_enable_planes(crtc);
}
-static void skylake_pfit_disable(struct intel_crtc *crtc)
-{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int pipe = crtc->pipe;
-
- /* To avoid upsetting the power well on haswell only disable the pfit if
- * it's in use. The hw state code will make sure we get this right. */
- if (crtc->config->pch_pfit.enabled) {
- I915_WRITE(PS_CTL(pipe), 0);
- I915_WRITE(PS_WIN_POS(pipe), 0);
- I915_WRITE(PS_WIN_SZ(pipe), 0);
- }
-}
-
static void ironlake_pfit_disable(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
@@ -4830,7 +5003,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
if (IS_SKYLAKE(dev))
- skylake_pfit_disable(intel_crtc);
+ skylake_pfit_update(intel_crtc, 0);
else
ironlake_pfit_disable(intel_crtc);
@@ -8069,14 +8242,28 @@ static void skylake_get_pfit_config(struct intel_crtc *crtc,
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t tmp;
+ struct intel_crtc_scaler_state *scaler_state = &pipe_config->scaler_state;
+ uint32_t ps_ctrl = 0;
+ int id = -1;
+ int i;
- tmp = I915_READ(PS_CTL(crtc->pipe));
+ /* find scaler attached to this pipe */
+ for (i = 0; i < crtc->num_scalers; i++) {
+ ps_ctrl = I915_READ(SKL_PS_CTRL(crtc->pipe, i));
+ if (ps_ctrl & PS_SCALER_EN && !(ps_ctrl & PS_PLANE_SEL_MASK)) {
+ id = i;
+ pipe_config->pch_pfit.enabled = true;
+ pipe_config->pch_pfit.pos = I915_READ(SKL_PS_WIN_POS(crtc->pipe, i));
+ pipe_config->pch_pfit.size = I915_READ(SKL_PS_WIN_SZ(crtc->pipe, i));
+ break;
+ }
+ }
- if (tmp & PS_ENABLE) {
- pipe_config->pch_pfit.enabled = true;
- pipe_config->pch_pfit.pos = I915_READ(PS_WIN_POS(crtc->pipe));
- pipe_config->pch_pfit.size = I915_READ(PS_WIN_SZ(crtc->pipe));
+ scaler_state->scaler_id = id;
+ if (id >= 0) {
+ scaler_state->scaler_users |= (1 << SKL_CRTC_INDEX);
+ } else {
+ scaler_state->scaler_users &= ~(1 << SKL_CRTC_INDEX);
}
}
@@ -8710,12 +8897,19 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
intel_get_pipe_timings(crtc, pipe_config);
+ if (INTEL_INFO(dev)->gen >= 9) {
+ skl_init_scalers(dev, crtc, pipe_config);
+ }
+
pfit_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
if (intel_display_power_is_enabled(dev_priv, pfit_domain)) {
if (IS_SKYLAKE(dev))
skylake_get_pfit_config(crtc, pipe_config);
else
ironlake_get_pfit_config(crtc, pipe_config);
+ } else {
+ pipe_config->scaler_state.scaler_id = -1;
+ pipe_config->scaler_state.scaler_users &= ~(1 << SKL_CRTC_INDEX);
}
if (IS_HASWELL(dev))
@@ -11222,6 +11416,8 @@ intel_pipe_config_compare(struct drm_device *dev,
PIPE_CONF_CHECK_I(pch_pfit.size);
}
+ PIPE_CONF_CHECK_I(scaler_state.scaler_id);
+
/* BDW+ don't expose a synchronous way to read the state */
if (IS_HASWELL(dev))
PIPE_CONF_CHECK_I(ips_enabled);
@@ -1351,6 +1351,14 @@ intel_dp_compute_config(struct intel_encoder *encoder,
if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
adjusted_mode);
+
+ if (INTEL_INFO(dev)->gen >= 9) {
+ int ret;
+ ret = skl_update_scaler_users(intel_crtc, pipe_config, NULL, NULL, 0);
+ if (ret)
+ return ret;
+ }
+
if (!HAS_PCH_SPLIT(dev))
intel_gmch_panel_fitting(intel_crtc, pipe_config,
intel_connector->panel.fitting_mode);
@@ -1121,6 +1121,10 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode,
struct intel_crtc_state *pipe_config);
void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc);
void intel_modeset_preclose(struct drm_device *dev, struct drm_file *file);
+void skl_detach_scalers(struct intel_crtc *intel_crtc);
+int skl_update_scaler_users(struct intel_crtc *intel_crtc,
+ struct intel_crtc_state *crtc_state, struct intel_plane *intel_plane,
+ struct intel_plane_state *plane_state, int force_detach);
unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane,
struct drm_i915_gem_object *obj);
Enabling skylake panel fitting feature using shared scalers v2: -added force detach parameter for pfit disable purpose (me) -read crtc scaler state from hw state (Daniel) -replaced both skylake_pfit_enable and disable with skylake_pfit_update (me) -added scaler id check to intel_pipe_config_compare (Daniel) v3: -updated function header to kerneldoc format (Matt) -dropped need_scaling checks (Matt) v4: -move clearing of scaler id from commit path to check path (Matt) -updated colorkey checks based on recent updates (me) -squashed scaler check while enabling colorkey to here (me) -use values in plane_state->src as regular integers (me) -changes made not to modify state in commit path (Matt) v5: -squashed helper function to update scaler users to here (Matt) -squashed helper function to detach scaler to here (Matt, me) -changes to align with updated scaler structures (Matt, me) Signed-off-by: Chandra Konduru <chandra.konduru@intel.com> --- drivers/gpu/drm/i915/intel_display.c | 250 ++++++++++++++++++++++++++++++---- drivers/gpu/drm/i915/intel_dp.c | 8 ++ drivers/gpu/drm/i915/intel_drv.h | 4 + 3 files changed, 235 insertions(+), 27 deletions(-)