diff mbox

[v2,07/11] drm/i915: CRT pixel clock check

Message ID 1438238978-10638-8-git-send-email-mika.kahola@intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Mika Kahola July 30, 2015, 6:49 a.m. UTC
It is possible the we request to have a mode that has
higher pixel clock than our HW can support. This patch
checks if requested pixel clock is lower than the one
supported by the HW. The requested mode is discarded
if we cannot support the requested pixel clock.

This patch applies to CRT.

V2:
- removed computation for max pixel clock

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
---
 drivers/gpu/drm/i915/intel_crt.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 5d78c1f..6e29bce 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -290,8 +290,10 @@  intel_crt_mode_valid(struct drm_connector *connector,
 		     struct drm_display_mode *mode)
 {
 	struct drm_device *dev = connector->dev;
-
+	struct drm_i915_private *dev_priv = to_i915(dev);
 	int max_clock = 0;
+	int max_pixclk = dev_priv->max_dotclk;
+
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
 
@@ -305,6 +307,9 @@  intel_crt_mode_valid(struct drm_connector *connector,
 	if (mode->clock > max_clock)
 		return MODE_CLOCK_HIGH;
 
+	if (mode->clock > max_pixclk)
+		return MODE_CLOCK_HIGH;
+
 	/* The FDI receiver on LPT only supports 8bpc and only has 2 lanes. */
 	if (HAS_PCH_LPT(dev) &&
 	    (ironlake_get_lanes_required(mode->clock, 270000, 24) > 2))