diff mbox

[7/8] drm/i915: add oa_event_min_timer_exponent sysctl

Message ID 1454448655-11178-8-git-send-email-robert@sixbynine.org (mailing list archive)
State New, archived
Headers show

Commit Message

Robert Bragg Feb. 2, 2016, 9:30 p.m. UTC
The minimal sampling period is now configurable via a
dev.i915.oa_min_timer_exponent sysctl parameter.

Following the precedent set by perf, the default is the minimum that
won't (on its own) exceed the default kernel.perf_event_max_sample_rate
default of 100000 samples/s.

Signed-off-by: Robert Bragg <robert@sixbynine.org>
---
 drivers/gpu/drm/i915/i915_perf.c | 40 +++++++++++++++++++++++++++++-----------
 1 file changed, 29 insertions(+), 11 deletions(-)
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
index 7c27d93..ca4860b 100644
--- a/drivers/gpu/drm/i915/i915_perf.c
+++ b/drivers/gpu/drm/i915/i915_perf.c
@@ -41,6 +41,23 @@  static u32 i915_perf_stream_paranoid = true;
 
 #define OA_EXPONENT_MAX 0x3f
 
+/* for sysctl proc_dointvec_minmax of i915_oa_min_timer_exponent */
+static int zero;
+static int oa_exponent_max = OA_EXPONENT_MAX;
+
+/* Theoretically we can program the OA unit to sample every 160ns but don't
+ * allow that by default unless root...
+ *
+ * The period is derived from the exponent as:
+ *
+ *   period = 80ns * 2^(exponent + 1)
+ *
+ * Referring to perf's kernel.perf_event_max_sample_rate for a precedent
+ * (100000 by default); with an OA exponent of 6 we get a period of 10.240
+ * microseconds - just under 100000Hz
+ */
+static u32 i915_oa_min_timer_exponent = 6;
+
 static struct i915_oa_format hsw_oa_formats[I915_OA_FORMAT_MAX] = {
 	[I915_OA_FORMAT_A13]	    = { 0, 64 },
 	[I915_OA_FORMAT_A29]	    = { 1, 128 },
@@ -1098,20 +1115,12 @@  static int read_properties_unlocked(struct drm_i915_private *dev_priv,
 			if (value > OA_EXPONENT_MAX)
 				return -EINVAL;
 
-			/* NB: The exponent represents a period as follows:
-			 *
-			 *   80ns * 2^(period_exponent + 1)
-			 *
-			 * Theoretically we can program the OA unit to sample
+			/* Theoretically we can program the OA unit to sample
 			 * every 160ns but don't allow that by default unless
 			 * root.
-			 *
-			 * Referring to perf's
-			 * kernel.perf_event_max_sample_rate for a precedent
-			 * (100000 by default); with an OA exponent of 6 we get
-			 * a period of 10.240 microseconds -just under 100000Hz
 			 */
-			if (value < 6 && !capable(CAP_SYS_ADMIN)) {
+			if (value < i915_oa_min_timer_exponent &&
+			    !capable(CAP_SYS_ADMIN)) {
 				DRM_ERROR("Sampling period too high without root privileges\n");
 				return -EACCES;
 			}
@@ -1174,6 +1183,15 @@  static struct ctl_table oa_table[] = {
 	 .mode = 0644,
 	 .proc_handler = proc_dointvec,
 	 },
+	{
+	 .procname = "oa_min_timer_exponent",
+	 .data = &i915_oa_min_timer_exponent,
+	 .maxlen = sizeof(i915_oa_min_timer_exponent),
+	 .mode = 0644,
+	 .proc_handler = proc_dointvec_minmax,
+	 .extra1 = &zero,
+	 .extra2 = &oa_exponent_max,
+	 },
 	{}
 };