@@ -749,6 +749,16 @@ parse_mipi_config(struct drm_i915_private *dev_priv,
return;
}
+ /*
+ * These fields are introduced from the VBT version 197 onwards,
+ * so making sure that these bits are set zero in the previous
+ * versions.
+ */
+ if (dev_priv->vbt.dsi.config->dual_link && bdb->version < 197) {
+ dev_priv->vbt.dsi.config->dl_cabc_ports = 0;
+ dev_priv->vbt.dsi.config->dl_panel_pwm_ports = 0;
+ }
+
/* We have mandatory mipi config blocks. Initialize as generic panel */
dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID;
}
@@ -113,7 +113,10 @@ struct mipi_config {
u16 dual_link:2;
u16 lane_cnt:2;
u16 pixel_overlap:3;
- u16 rsvd3:9;
+ u16 rgb_flip:1;
+ u16 dl_cabc_ports:2;
+ u16 dl_panel_pwm_ports:2;
+ u16 rsvd3:4;
u16 rsvd4;
@@ -78,6 +78,15 @@ struct intel_dsi {
u8 escape_clk_div;
u8 dual_link;
+
+ /*
+ * Below field will inform us on which port the panel blk_cntrl
+ * and CABC ON/OFF commands needs to be sent in case of dual link
+ * panels
+ */
+ u8 cabc_dcs_ports;
+ u8 panel_pwm_dcs_ports;
+
u8 pixel_overlap;
u32 port_bits;
u32 bw_timer;
For dual link panel scenarios there are new fields added in the VBT which indicate on which port the PWM cntrl and CABC ON/OFF commands needs to be sent. v2: Moving the comment to intel_dsi.h(Jani) v3: Renaming the field names (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Yetunde Adebisi <yetundex.adebisi@intel.com> Signed-off-by: Deepak M <m.deepak@intel.com> --- DCS commands 0x53h and 0x54h controls the panel PWM operations and therfore we should send these commands to the ports mentioned in the field "dl_panel_pwm_ports" in the VBT DCS commands 55h and 56h controls the CABC operation and therfore we should be sending these commands to the ports specified in the field "dl_cabc_ports" in the VBT. drivers/gpu/drm/i915/intel_bios.c | 10 ++++++++++ drivers/gpu/drm/i915/intel_bios.h | 5 ++++- drivers/gpu/drm/i915/intel_dsi.h | 9 +++++++++ 3 files changed, 23 insertions(+), 1 deletion(-)