Message ID | 1459475198-30094-5-git-send-email-matthew.d.roper@intel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On to, 2016-03-31 at 18:46 -0700, Matt Roper wrote: > From: "Kumar, Mahesh" <mahesh1.kumar@intel.com> > > Use plane size for relative data rate calculation. don't always use > pipe source width & height. > adjust height & width according to rotation. > use plane size for watermark calculations also. > > v2: Address Matt's comments. > Use intel_plane_state->visible to avoid divide-by-zero error. > Where FB was present but not visible so causing total data rate > to > be zero, hence divide-by-zero. > > Cc: matthew.d.roper@intel.com > Signed-off-by: Kumar, Mahesh <mahesh1.kumar@intel.com> > Reviewed-by: Matt Roper <matthew.d.roper@intel.com> > Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reference: https://bugs.freedesktop.org/show_bug.cgi?id=93917 Reference: https://bugs.freedesktop.org/show_bug.cgi?id=94044 This patch fixed a screen corruption problem for me with an eDP + DP config. It somehow made worse by moving the cursor around and I can get rid of it by switching of the cursor plane. Matt any chance of getting this merged separately from the rest? --Imre > --- > drivers/gpu/drm/i915/intel_pm.c | 41 ++++++++++++++++++++++++++++--- > ---------- > 1 file changed, 28 insertions(+), 13 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_pm.c > b/drivers/gpu/drm/i915/intel_pm.c > index c970c4e..1c3f772 100644 > --- a/drivers/gpu/drm/i915/intel_pm.c > +++ b/drivers/gpu/drm/i915/intel_pm.c > @@ -2937,24 +2937,28 @@ skl_plane_relative_data_rate(const struct > intel_crtc_state *cstate, > const struct drm_plane_state *pstate, > int y) > { > - struct intel_crtc *intel_crtc = to_intel_crtc(cstate- > >base.crtc); > + struct intel_plane_state *intel_pstate = > to_intel_plane_state(pstate); > struct drm_framebuffer *fb = pstate->fb; > + uint32_t width = 0, height = 0; > + > + width = drm_rect_width(&intel_pstate->src) >> 16; > + height = drm_rect_height(&intel_pstate->src) >> 16; > + > + if (intel_rotation_90_or_270(pstate->rotation)) > + swap(width, height); > > /* for planar format */ > if (fb->pixel_format == DRM_FORMAT_NV12) { > if (y) /* y-plane data rate */ > - return intel_crtc->config->pipe_src_w * > - intel_crtc->config->pipe_src_h * > + return width * height * > drm_format_plane_cpp(fb- > >pixel_format, 0); > else /* uv-plane data rate */ > - return (intel_crtc->config->pipe_src_w/2) * > - (intel_crtc->config->pipe_src_h/2) * > + return (width / 2) * (height / 2) * > drm_format_plane_cpp(fb- > >pixel_format, 1); > } > > /* for packed formats */ > - return cstate->pipe_src_w * cstate->pipe_src_h * > - drm_format_plane_cpp(fb->pixel_format, 0); > + return width * height * drm_format_plane_cpp(fb- > >pixel_format, 0); > } > > /* > @@ -3033,8 +3037,9 @@ skl_allocate_pipe_ddb(struct intel_crtc_state > *cstate, > struct drm_framebuffer *fb = plane->state->fb; > int id = skl_wm_plane_id(intel_plane); > > - if (fb == NULL) > + if (!to_intel_plane_state(plane->state)->visible) > continue; > + > if (plane->type == DRM_PLANE_TYPE_CURSOR) > continue; > > @@ -3060,7 +3065,7 @@ skl_allocate_pipe_ddb(struct intel_crtc_state > *cstate, > uint16_t plane_blocks, y_plane_blocks = 0; > int id = skl_wm_plane_id(intel_plane); > > - if (pstate->fb == NULL) > + if (!to_intel_plane_state(pstate)->visible) > continue; > if (plane->type == DRM_PLANE_TYPE_CURSOR) > continue; > @@ -3183,26 +3188,36 @@ static bool skl_compute_plane_wm(const struct > drm_i915_private *dev_priv, > { > struct drm_plane *plane = &intel_plane->base; > struct drm_framebuffer *fb = plane->state->fb; > + struct intel_plane_state *intel_pstate = > + to_intel_plane_state(plane- > >state); > uint32_t latency = dev_priv->wm.skl_latency[level]; > uint32_t method1, method2; > uint32_t plane_bytes_per_line, plane_blocks_per_line; > uint32_t res_blocks, res_lines; > uint32_t selected_result; > uint8_t cpp; > + uint32_t width = 0, height = 0; > > - if (latency == 0 || !cstate->base.active || !fb) > + if (latency == 0 || !cstate->base.active || !intel_pstate- > >visible) > return false; > > + width = drm_rect_width(&intel_pstate->src) >> 16; > + height = drm_rect_height(&intel_pstate->src) >> 16; > + > + if (intel_rotation_90_or_270(plane->state->rotation)) > + swap(width, height); > + > cpp = drm_format_plane_cpp(fb->pixel_format, 0); > method1 = skl_wm_method1(skl_pipe_pixel_rate(cstate), > cpp, latency); > method2 = skl_wm_method2(skl_pipe_pixel_rate(cstate), > cstate- > >base.adjusted_mode.crtc_htotal, > - cstate->pipe_src_w, > - cpp, fb->modifier[0], > + width, > + cpp, > + fb->modifier[0], > latency); > > - plane_bytes_per_line = cstate->pipe_src_w * cpp; > + plane_bytes_per_line = width * cpp; > plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, > 512); > > if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
On Wed, Apr 06, 2016 at 06:09:00PM +0300, Imre Deak wrote: > On to, 2016-03-31 at 18:46 -0700, Matt Roper wrote: > > From: "Kumar, Mahesh" <mahesh1.kumar@intel.com> > > > > Use plane size for relative data rate calculation. don't always use > > pipe source width & height. > > adjust height & width according to rotation. > > use plane size for watermark calculations also. > > > > v2: Address Matt's comments. > > Use intel_plane_state->visible to avoid divide-by-zero error. > > Where FB was present but not visible so causing total data rate > > to > > be zero, hence divide-by-zero. > > > > Cc: matthew.d.roper@intel.com > > Signed-off-by: Kumar, Mahesh <mahesh1.kumar@intel.com> > > Reviewed-by: Matt Roper <matthew.d.roper@intel.com> > > Signed-off-by: Matt Roper <matthew.d.roper@intel.com> > > Reference: https://bugs.freedesktop.org/show_bug.cgi?id=93917 > Reference: https://bugs.freedesktop.org/show_bug.cgi?id=94044 > > This patch fixed a screen corruption problem for me with an eDP + DP > config. It somehow made worse by moving the cursor around and I can get > rid of it by switching of the cursor plane. > > Matt any chance of getting this merged separately from the rest? > > --Imre Yep, I'd already reviewed this when Mahesh wrote it a while back so I just ran this through CI in isolation and it came up clean. Added a Cc: -fixes and pushed to dinq. Matt > > > --- > > drivers/gpu/drm/i915/intel_pm.c | 41 ++++++++++++++++++++++++++++--- > > ---------- > > 1 file changed, 28 insertions(+), 13 deletions(-) > > > > diff --git a/drivers/gpu/drm/i915/intel_pm.c > > b/drivers/gpu/drm/i915/intel_pm.c > > index c970c4e..1c3f772 100644 > > --- a/drivers/gpu/drm/i915/intel_pm.c > > +++ b/drivers/gpu/drm/i915/intel_pm.c > > @@ -2937,24 +2937,28 @@ skl_plane_relative_data_rate(const struct > > intel_crtc_state *cstate, > > const struct drm_plane_state *pstate, > > int y) > > { > > - struct intel_crtc *intel_crtc = to_intel_crtc(cstate- > > >base.crtc); > > + struct intel_plane_state *intel_pstate = > > to_intel_plane_state(pstate); > > struct drm_framebuffer *fb = pstate->fb; > > + uint32_t width = 0, height = 0; > > + > > + width = drm_rect_width(&intel_pstate->src) >> 16; > > + height = drm_rect_height(&intel_pstate->src) >> 16; > > + > > + if (intel_rotation_90_or_270(pstate->rotation)) > > + swap(width, height); > > > > /* for planar format */ > > if (fb->pixel_format == DRM_FORMAT_NV12) { > > if (y) /* y-plane data rate */ > > - return intel_crtc->config->pipe_src_w * > > - intel_crtc->config->pipe_src_h * > > + return width * height * > > drm_format_plane_cpp(fb- > > >pixel_format, 0); > > else /* uv-plane data rate */ > > - return (intel_crtc->config->pipe_src_w/2) * > > - (intel_crtc->config->pipe_src_h/2) * > > + return (width / 2) * (height / 2) * > > drm_format_plane_cpp(fb- > > >pixel_format, 1); > > } > > > > /* for packed formats */ > > - return cstate->pipe_src_w * cstate->pipe_src_h * > > - drm_format_plane_cpp(fb->pixel_format, 0); > > + return width * height * drm_format_plane_cpp(fb- > > >pixel_format, 0); > > } > > > > /* > > @@ -3033,8 +3037,9 @@ skl_allocate_pipe_ddb(struct intel_crtc_state > > *cstate, > > struct drm_framebuffer *fb = plane->state->fb; > > int id = skl_wm_plane_id(intel_plane); > > > > - if (fb == NULL) > > + if (!to_intel_plane_state(plane->state)->visible) > > continue; > > + > > if (plane->type == DRM_PLANE_TYPE_CURSOR) > > continue; > > > > @@ -3060,7 +3065,7 @@ skl_allocate_pipe_ddb(struct intel_crtc_state > > *cstate, > > uint16_t plane_blocks, y_plane_blocks = 0; > > int id = skl_wm_plane_id(intel_plane); > > > > - if (pstate->fb == NULL) > > + if (!to_intel_plane_state(pstate)->visible) > > continue; > > if (plane->type == DRM_PLANE_TYPE_CURSOR) > > continue; > > @@ -3183,26 +3188,36 @@ static bool skl_compute_plane_wm(const struct > > drm_i915_private *dev_priv, > > { > > struct drm_plane *plane = &intel_plane->base; > > struct drm_framebuffer *fb = plane->state->fb; > > + struct intel_plane_state *intel_pstate = > > + to_intel_plane_state(plane- > > >state); > > uint32_t latency = dev_priv->wm.skl_latency[level]; > > uint32_t method1, method2; > > uint32_t plane_bytes_per_line, plane_blocks_per_line; > > uint32_t res_blocks, res_lines; > > uint32_t selected_result; > > uint8_t cpp; > > + uint32_t width = 0, height = 0; > > > > - if (latency == 0 || !cstate->base.active || !fb) > > + if (latency == 0 || !cstate->base.active || !intel_pstate- > > >visible) > > return false; > > > > + width = drm_rect_width(&intel_pstate->src) >> 16; > > + height = drm_rect_height(&intel_pstate->src) >> 16; > > + > > + if (intel_rotation_90_or_270(plane->state->rotation)) > > + swap(width, height); > > + > > cpp = drm_format_plane_cpp(fb->pixel_format, 0); > > method1 = skl_wm_method1(skl_pipe_pixel_rate(cstate), > > cpp, latency); > > method2 = skl_wm_method2(skl_pipe_pixel_rate(cstate), > > cstate- > > >base.adjusted_mode.crtc_htotal, > > - cstate->pipe_src_w, > > - cpp, fb->modifier[0], > > + width, > > + cpp, > > + fb->modifier[0], > > latency); > > > > - plane_bytes_per_line = cstate->pipe_src_w * cpp; > > + plane_bytes_per_line = width * cpp; > > plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, > > 512); > > > > if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index c970c4e..1c3f772 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2937,24 +2937,28 @@ skl_plane_relative_data_rate(const struct intel_crtc_state *cstate, const struct drm_plane_state *pstate, int y) { - struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc); + struct intel_plane_state *intel_pstate = to_intel_plane_state(pstate); struct drm_framebuffer *fb = pstate->fb; + uint32_t width = 0, height = 0; + + width = drm_rect_width(&intel_pstate->src) >> 16; + height = drm_rect_height(&intel_pstate->src) >> 16; + + if (intel_rotation_90_or_270(pstate->rotation)) + swap(width, height); /* for planar format */ if (fb->pixel_format == DRM_FORMAT_NV12) { if (y) /* y-plane data rate */ - return intel_crtc->config->pipe_src_w * - intel_crtc->config->pipe_src_h * + return width * height * drm_format_plane_cpp(fb->pixel_format, 0); else /* uv-plane data rate */ - return (intel_crtc->config->pipe_src_w/2) * - (intel_crtc->config->pipe_src_h/2) * + return (width / 2) * (height / 2) * drm_format_plane_cpp(fb->pixel_format, 1); } /* for packed formats */ - return cstate->pipe_src_w * cstate->pipe_src_h * - drm_format_plane_cpp(fb->pixel_format, 0); + return width * height * drm_format_plane_cpp(fb->pixel_format, 0); } /* @@ -3033,8 +3037,9 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate, struct drm_framebuffer *fb = plane->state->fb; int id = skl_wm_plane_id(intel_plane); - if (fb == NULL) + if (!to_intel_plane_state(plane->state)->visible) continue; + if (plane->type == DRM_PLANE_TYPE_CURSOR) continue; @@ -3060,7 +3065,7 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate, uint16_t plane_blocks, y_plane_blocks = 0; int id = skl_wm_plane_id(intel_plane); - if (pstate->fb == NULL) + if (!to_intel_plane_state(pstate)->visible) continue; if (plane->type == DRM_PLANE_TYPE_CURSOR) continue; @@ -3183,26 +3188,36 @@ static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv, { struct drm_plane *plane = &intel_plane->base; struct drm_framebuffer *fb = plane->state->fb; + struct intel_plane_state *intel_pstate = + to_intel_plane_state(plane->state); uint32_t latency = dev_priv->wm.skl_latency[level]; uint32_t method1, method2; uint32_t plane_bytes_per_line, plane_blocks_per_line; uint32_t res_blocks, res_lines; uint32_t selected_result; uint8_t cpp; + uint32_t width = 0, height = 0; - if (latency == 0 || !cstate->base.active || !fb) + if (latency == 0 || !cstate->base.active || !intel_pstate->visible) return false; + width = drm_rect_width(&intel_pstate->src) >> 16; + height = drm_rect_height(&intel_pstate->src) >> 16; + + if (intel_rotation_90_or_270(plane->state->rotation)) + swap(width, height); + cpp = drm_format_plane_cpp(fb->pixel_format, 0); method1 = skl_wm_method1(skl_pipe_pixel_rate(cstate), cpp, latency); method2 = skl_wm_method2(skl_pipe_pixel_rate(cstate), cstate->base.adjusted_mode.crtc_htotal, - cstate->pipe_src_w, - cpp, fb->modifier[0], + width, + cpp, + fb->modifier[0], latency); - plane_bytes_per_line = cstate->pipe_src_w * cpp; + plane_bytes_per_line = width * cpp; plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512); if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||