@@ -14,6 +14,7 @@ i915-y := i915_drv.o \
i915_suspend.o \
i915_sysfs.o \
intel_csr.o \
+ intel_device_info.o \
intel_pm.o \
intel_runtime_pm.o
@@ -742,394 +742,6 @@ static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
}
#endif
-static void i915_dump_device_info(struct drm_i915_private *dev_priv)
-{
- const struct intel_device_info *info = &dev_priv->info;
-
-#define PRINT_S(name) "%s"
-#define SEP_EMPTY
-#define PRINT_FLAG(name) info->name ? #name "," : ""
-#define SEP_COMMA ,
- DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x rev=0x%02x flags="
- DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY),
- info->gen,
- dev_priv->dev->pdev->device,
- dev_priv->dev->pdev->revision,
- DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA));
-#undef PRINT_S
-#undef SEP_EMPTY
-#undef PRINT_FLAG
-#undef SEP_COMMA
-}
-
-static void cherryview_sseu_info_init(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_device_info *info;
- u32 fuse, eu_dis;
-
- info = (struct intel_device_info *)&dev_priv->info;
- fuse = I915_READ(CHV_FUSE_GT);
-
- info->slice_total = 1;
-
- if (!(fuse & CHV_FGT_DISABLE_SS0)) {
- info->subslice_per_slice++;
- eu_dis = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
- CHV_FGT_EU_DIS_SS0_R1_MASK);
- info->eu_total += 8 - hweight32(eu_dis);
- }
-
- if (!(fuse & CHV_FGT_DISABLE_SS1)) {
- info->subslice_per_slice++;
- eu_dis = fuse & (CHV_FGT_EU_DIS_SS1_R0_MASK |
- CHV_FGT_EU_DIS_SS1_R1_MASK);
- info->eu_total += 8 - hweight32(eu_dis);
- }
-
- info->subslice_total = info->subslice_per_slice;
- /*
- * CHV expected to always have a uniform distribution of EU
- * across subslices.
- */
- info->eu_per_subslice = info->subslice_total ?
- info->eu_total / info->subslice_total :
- 0;
- /*
- * CHV supports subslice power gating on devices with more than
- * one subslice, and supports EU power gating on devices with
- * more than one EU pair per subslice.
- */
- info->has_slice_pg = 0;
- info->has_subslice_pg = (info->subslice_total > 1);
- info->has_eu_pg = (info->eu_per_subslice > 2);
-}
-
-static void gen9_sseu_info_init(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_device_info *info;
- int s_max = 3, ss_max = 4, eu_max = 8;
- int s, ss;
- u32 fuse2, s_enable, ss_disable, eu_disable;
- u8 eu_mask = 0xff;
-
- info = (struct intel_device_info *)&dev_priv->info;
- fuse2 = I915_READ(GEN8_FUSE2);
- s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >>
- GEN8_F2_S_ENA_SHIFT;
- ss_disable = (fuse2 & GEN9_F2_SS_DIS_MASK) >>
- GEN9_F2_SS_DIS_SHIFT;
-
- info->slice_total = hweight32(s_enable);
- /*
- * The subslice disable field is global, i.e. it applies
- * to each of the enabled slices.
- */
- info->subslice_per_slice = ss_max - hweight32(ss_disable);
- info->subslice_total = info->slice_total *
- info->subslice_per_slice;
-
- /*
- * Iterate through enabled slices and subslices to
- * count the total enabled EU.
- */
- for (s = 0; s < s_max; s++) {
- if (!(s_enable & (0x1 << s)))
- /* skip disabled slice */
- continue;
-
- eu_disable = I915_READ(GEN9_EU_DISABLE(s));
- for (ss = 0; ss < ss_max; ss++) {
- int eu_per_ss;
-
- if (ss_disable & (0x1 << ss))
- /* skip disabled subslice */
- continue;
-
- eu_per_ss = eu_max - hweight8((eu_disable >> (ss*8)) &
- eu_mask);
-
- /*
- * Record which subslice(s) has(have) 7 EUs. we
- * can tune the hash used to spread work among
- * subslices if they are unbalanced.
- */
- if (eu_per_ss == 7)
- info->subslice_7eu[s] |= 1 << ss;
-
- info->eu_total += eu_per_ss;
- }
- }
-
- /*
- * SKL is expected to always have a uniform distribution
- * of EU across subslices with the exception that any one
- * EU in any one subslice may be fused off for die
- * recovery. BXT is expected to be perfectly uniform in EU
- * distribution.
- */
- info->eu_per_subslice = info->subslice_total ?
- DIV_ROUND_UP(info->eu_total,
- info->subslice_total) : 0;
- /*
- * SKL supports slice power gating on devices with more than
- * one slice, and supports EU power gating on devices with
- * more than one EU pair per subslice. BXT supports subslice
- * power gating on devices with more than one subslice, and
- * supports EU power gating on devices with more than one EU
- * pair per subslice.
- */
- info->has_slice_pg = ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
- (info->slice_total > 1));
- info->has_subslice_pg = (IS_BROXTON(dev) && (info->subslice_total > 1));
- info->has_eu_pg = (info->eu_per_subslice > 2);
-
- if (IS_BROXTON(dev)) {
-#define IS_SS_DISABLED(_ss_disable, ss) (_ss_disable & (0x1 << ss))
- /*
- * There is a HW issue in 2x6 fused down parts that requires
- * Pooled EU to be enabled as a WA. The pool configuration
- * changes depending upon which subslice is fused down. This
- * doesn't affect if the device has all 3 subslices enabled.
- */
- /* WaEnablePooledEuFor2x6:bxt */
- info->has_pooled_eu = ((info->subslice_per_slice == 3) ||
- (info->subslice_per_slice == 2 &&
- INTEL_REVID(dev) < BXT_REVID_C0));
-
- info->min_eu_in_pool = 0;
- if (info->has_pooled_eu) {
- if (IS_SS_DISABLED(ss_disable, 0) ||
- IS_SS_DISABLED(ss_disable, 2))
- info->min_eu_in_pool = 3;
- else if (IS_SS_DISABLED(ss_disable, 1))
- info->min_eu_in_pool = 6;
- else
- info->min_eu_in_pool = 9;
- }
-#undef IS_SS_DISABLED
- }
-}
-
-static void broadwell_sseu_info_init(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_device_info *info;
- const int s_max = 3, ss_max = 3, eu_max = 8;
- int s, ss;
- u32 fuse2, eu_disable[s_max], s_enable, ss_disable;
-
- fuse2 = I915_READ(GEN8_FUSE2);
- s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;
- ss_disable = (fuse2 & GEN8_F2_SS_DIS_MASK) >> GEN8_F2_SS_DIS_SHIFT;
-
- eu_disable[0] = I915_READ(GEN8_EU_DISABLE0) & GEN8_EU_DIS0_S0_MASK;
- eu_disable[1] = (I915_READ(GEN8_EU_DISABLE0) >> GEN8_EU_DIS0_S1_SHIFT) |
- ((I915_READ(GEN8_EU_DISABLE1) & GEN8_EU_DIS1_S1_MASK) <<
- (32 - GEN8_EU_DIS0_S1_SHIFT));
- eu_disable[2] = (I915_READ(GEN8_EU_DISABLE1) >> GEN8_EU_DIS1_S2_SHIFT) |
- ((I915_READ(GEN8_EU_DISABLE2) & GEN8_EU_DIS2_S2_MASK) <<
- (32 - GEN8_EU_DIS1_S2_SHIFT));
-
-
- info = (struct intel_device_info *)&dev_priv->info;
- info->slice_total = hweight32(s_enable);
-
- /*
- * The subslice disable field is global, i.e. it applies
- * to each of the enabled slices.
- */
- info->subslice_per_slice = ss_max - hweight32(ss_disable);
- info->subslice_total = info->slice_total * info->subslice_per_slice;
-
- /*
- * Iterate through enabled slices and subslices to
- * count the total enabled EU.
- */
- for (s = 0; s < s_max; s++) {
- if (!(s_enable & (0x1 << s)))
- /* skip disabled slice */
- continue;
-
- for (ss = 0; ss < ss_max; ss++) {
- u32 n_disabled;
-
- if (ss_disable & (0x1 << ss))
- /* skip disabled subslice */
- continue;
-
- n_disabled = hweight8(eu_disable[s] >> (ss * eu_max));
-
- /*
- * Record which subslices have 7 EUs.
- */
- if (eu_max - n_disabled == 7)
- info->subslice_7eu[s] |= 1 << ss;
-
- info->eu_total += eu_max - n_disabled;
- }
- }
-
- /*
- * BDW is expected to always have a uniform distribution of EU across
- * subslices with the exception that any one EU in any one subslice may
- * be fused off for die recovery.
- */
- info->eu_per_subslice = info->subslice_total ?
- DIV_ROUND_UP(info->eu_total, info->subslice_total) : 0;
-
- /*
- * BDW supports slice power gating on devices with more than
- * one slice.
- */
- info->has_slice_pg = (info->slice_total > 1);
- info->has_subslice_pg = 0;
- info->has_eu_pg = 0;
-}
-
-/*
- * Determine various intel_device_info fields at runtime.
- *
- * Use it when either:
- * - it's judged too laborious to fill n static structures with the limit
- * when a simple if statement does the job,
- * - run-time checks (eg read fuse/strap registers) are needed.
- *
- * This function needs to be called:
- * - after the MMIO has been setup as we are reading registers,
- * - after the PCH has been detected,
- * - before the first usage of the fields it can tweak.
- */
-static void intel_device_info_runtime_init(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_device_info *info;
- enum pipe pipe;
-
- info = (struct intel_device_info *)&dev_priv->info;
-
- /*
- * Skylake and Broxton currently don't expose the topmost plane as its
- * use is exclusive with the legacy cursor and we only want to expose
- * one of those, not both. Until we can safely expose the topmost plane
- * as a DRM_PLANE_TYPE_CURSOR with all the features exposed/supported,
- * we don't expose the topmost plane at all to prevent ABI breakage
- * down the line.
- */
- if (IS_BROXTON(dev)) {
- info->num_sprites[PIPE_A] = 2;
- info->num_sprites[PIPE_B] = 2;
- info->num_sprites[PIPE_C] = 1;
- } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
- for_each_pipe(dev_priv, pipe)
- info->num_sprites[pipe] = 2;
- else
- for_each_pipe(dev_priv, pipe)
- info->num_sprites[pipe] = 1;
-
- if (i915.disable_display) {
- DRM_INFO("Display disabled (module parameter)\n");
- info->num_pipes = 0;
- } else if (info->num_pipes > 0 &&
- (IS_GEN7(dev_priv) || IS_GEN8(dev_priv)) &&
- HAS_PCH_SPLIT(dev)) {
- u32 fuse_strap = I915_READ(FUSE_STRAP);
- u32 sfuse_strap = I915_READ(SFUSE_STRAP);
-
- /*
- * SFUSE_STRAP is supposed to have a bit signalling the display
- * is fused off. Unfortunately it seems that, at least in
- * certain cases, fused off display means that PCH display
- * reads don't land anywhere. In that case, we read 0s.
- *
- * On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK
- * should be set when taking over after the firmware.
- */
- if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE ||
- sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED ||
- (dev_priv->pch_type == PCH_CPT &&
- !(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) {
- DRM_INFO("Display fused off, disabling\n");
- info->num_pipes = 0;
- } else if (fuse_strap & IVB_PIPE_C_DISABLE) {
- DRM_INFO("PipeC fused off\n");
- info->num_pipes -= 1;
- }
- } else if (info->num_pipes > 0 && IS_GEN9(dev_priv)) {
- u32 dfsm = I915_READ(SKL_DFSM);
- u8 disabled_mask = 0;
- bool invalid;
- int num_bits;
-
- if (dfsm & SKL_DFSM_PIPE_A_DISABLE)
- disabled_mask |= BIT(PIPE_A);
- if (dfsm & SKL_DFSM_PIPE_B_DISABLE)
- disabled_mask |= BIT(PIPE_B);
- if (dfsm & SKL_DFSM_PIPE_C_DISABLE)
- disabled_mask |= BIT(PIPE_C);
-
- num_bits = hweight8(disabled_mask);
-
- switch (disabled_mask) {
- case BIT(PIPE_A):
- case BIT(PIPE_B):
- case BIT(PIPE_A) | BIT(PIPE_B):
- case BIT(PIPE_A) | BIT(PIPE_C):
- invalid = true;
- break;
- default:
- invalid = false;
- }
-
- if (num_bits > info->num_pipes || invalid)
- DRM_ERROR("invalid pipe fuse configuration: 0x%x\n",
- disabled_mask);
- else
- info->num_pipes -= num_bits;
- }
-
- /* Initialize slice/subslice/EU info */
- if (IS_CHERRYVIEW(dev))
- cherryview_sseu_info_init(dev);
- else if (IS_BROADWELL(dev))
- broadwell_sseu_info_init(dev);
- else if (INTEL_INFO(dev)->gen >= 9)
- gen9_sseu_info_init(dev);
-
- info->has_snoop = !info->has_llc;
-
- /* Snooping is broken on BXT A stepping. */
- if (IS_BXT_REVID(dev, 0, BXT_REVID_A1))
- info->has_snoop = false;
-
- DRM_DEBUG_DRIVER("slice total: %u\n", info->slice_total);
- DRM_DEBUG_DRIVER("subslice total: %u\n", info->subslice_total);
- DRM_DEBUG_DRIVER("subslice per slice: %u\n", info->subslice_per_slice);
- DRM_DEBUG_DRIVER("EU total: %u\n", info->eu_total);
- DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->eu_per_subslice);
- DRM_DEBUG_DRIVER("has slice power gating: %s\n",
- info->has_slice_pg ? "y" : "n");
- DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
- info->has_subslice_pg ? "y" : "n");
- DRM_DEBUG_DRIVER("has EU power gating: %s\n",
- info->has_eu_pg ? "y" : "n");
-
- i915.enable_execlists =
- intel_sanitize_enable_execlists(dev_priv,
- i915.enable_execlists);
-
- /*
- * i915.enable_ppgtt is read-only, so do an early pass to validate the
- * user's requested state against the hardware/driver capabilities. We
- * do this now so that we can print out any log messages once rather
- * than every time we check intel_enable_ppgtt().
- */
- i915.enable_ppgtt =
- intel_sanitize_enable_ppgtt(dev_priv, i915.enable_ppgtt);
- DRM_DEBUG_DRIVER("ppgtt mode: %i\n", i915.enable_ppgtt);
-}
-
static void intel_init_dpio(struct drm_i915_private *dev_priv)
{
/*
@@ -1215,7 +827,7 @@ static int i915_driver_init_early(struct drm_i915_private *dev_priv,
return -ENODEV;
/* Setup the write-once "constant" device info */
- device_info = (struct intel_device_info *)&dev_priv->info;
+ device_info = mkwrite_device_info(dev_priv);
memcpy(device_info, match_info, sizeof(*device_info));
device_info->device_id = dev_priv->drm.pdev->device;
@@ -1256,7 +868,7 @@ static int i915_driver_init_early(struct drm_i915_private *dev_priv,
intel_display_crc_init(&dev_priv->drm);
- i915_dump_device_info(dev_priv);
+ intel_device_info_dump(dev_priv);
/* Not all pre-production machines fall into this category, only the
* very first ones. Almost everything should work, except for maybe
@@ -1370,6 +982,23 @@ static void i915_driver_cleanup_mmio(struct drm_i915_private *dev_priv)
pci_dev_put(dev_priv->bridge_dev);
}
+static void intel_sanitize_options(struct drm_i915_private *dev_priv)
+{
+ i915.enable_execlists =
+ intel_sanitize_enable_execlists(dev_priv,
+ i915.enable_execlists);
+
+ /*
+ * i915.enable_ppgtt is read-only, so do an early pass to validate the
+ * user's requested state against the hardware/driver capabilities. We
+ * do this now so that we can print out any log messages once rather
+ * than every time we check intel_enable_ppgtt().
+ */
+ i915.enable_ppgtt =
+ intel_sanitize_enable_ppgtt(dev_priv, i915.enable_ppgtt);
+ DRM_DEBUG_DRIVER("ppgtt mode: %i\n", i915.enable_ppgtt);
+}
+
/**
* i915_driver_init_hw - setup state requiring device access
* @dev_priv: device private
@@ -1387,7 +1016,9 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
if (i915_inject_load_failure())
return -ENODEV;
- intel_device_info_runtime_init(dev);
+ intel_device_info_runtime_init(dev_priv);
+
+ intel_sanitize_options(dev_priv);
ret = i915_ggtt_init_hw(dev);
if (ret)
@@ -3734,6 +3734,15 @@ static inline void intel_register_dsm_handler(void) { return; }
static inline void intel_unregister_dsm_handler(void) { return; }
#endif /* CONFIG_ACPI */
+/* intel_device_info.c */
+static inline struct intel_device_info *
+mkwrite_device_info(struct drm_i915_private *dev_priv)
+{
+ return (struct intel_device_info *)&dev_priv->info;
+}
+void intel_device_info_runtime_init(struct drm_i915_private *dev_priv);
+void intel_device_info_dump(struct drm_i915_private *dev_priv);
+
/* modesetting */
extern void intel_modeset_init_hw(struct drm_device *dev);
extern void intel_modeset_init(struct drm_device *dev);
new file mode 100644
@@ -0,0 +1,390 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#include "i915_drv.h"
+
+void intel_device_info_dump(struct drm_i915_private *dev_priv)
+{
+ const struct intel_device_info *info = &dev_priv->info;
+
+#define PRINT_S(name) "%s"
+#define SEP_EMPTY
+#define PRINT_FLAG(name) info->name ? #name "," : ""
+#define SEP_COMMA ,
+ DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x rev=0x%02x flags="
+ DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY),
+ info->gen,
+ dev_priv->drm.pdev->device,
+ dev_priv->drm.pdev->revision,
+ DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA));
+#undef PRINT_S
+#undef SEP_EMPTY
+#undef PRINT_FLAG
+#undef SEP_COMMA
+}
+
+static void cherryview_sseu_info_init(struct drm_i915_private *dev_priv)
+{
+ struct intel_device_info *info = mkwrite_device_info(dev_priv);
+ u32 fuse, eu_dis;
+
+ fuse = I915_READ(CHV_FUSE_GT);
+
+ info->slice_total = 1;
+
+ if (!(fuse & CHV_FGT_DISABLE_SS0)) {
+ info->subslice_per_slice++;
+ eu_dis = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
+ CHV_FGT_EU_DIS_SS0_R1_MASK);
+ info->eu_total += 8 - hweight32(eu_dis);
+ }
+
+ if (!(fuse & CHV_FGT_DISABLE_SS1)) {
+ info->subslice_per_slice++;
+ eu_dis = fuse & (CHV_FGT_EU_DIS_SS1_R0_MASK |
+ CHV_FGT_EU_DIS_SS1_R1_MASK);
+ info->eu_total += 8 - hweight32(eu_dis);
+ }
+
+ info->subslice_total = info->subslice_per_slice;
+ /*
+ * CHV expected to always have a uniform distribution of EU
+ * across subslices.
+ */
+ info->eu_per_subslice = info->subslice_total ?
+ info->eu_total / info->subslice_total :
+ 0;
+ /*
+ * CHV supports subslice power gating on devices with more than
+ * one subslice, and supports EU power gating on devices with
+ * more than one EU pair per subslice.
+ */
+ info->has_slice_pg = 0;
+ info->has_subslice_pg = (info->subslice_total > 1);
+ info->has_eu_pg = (info->eu_per_subslice > 2);
+}
+
+static void gen9_sseu_info_init(struct drm_i915_private *dev_priv)
+{
+ struct intel_device_info *info = mkwrite_device_info(dev_priv);
+ int s_max = 3, ss_max = 4, eu_max = 8;
+ int s, ss;
+ u32 fuse2, s_enable, ss_disable, eu_disable;
+ u8 eu_mask = 0xff;
+
+ fuse2 = I915_READ(GEN8_FUSE2);
+ s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >>
+ GEN8_F2_S_ENA_SHIFT;
+ ss_disable = (fuse2 & GEN9_F2_SS_DIS_MASK) >>
+ GEN9_F2_SS_DIS_SHIFT;
+
+ info->slice_total = hweight32(s_enable);
+ /*
+ * The subslice disable field is global, i.e. it applies
+ * to each of the enabled slices.
+ */
+ info->subslice_per_slice = ss_max - hweight32(ss_disable);
+ info->subslice_total = info->slice_total *
+ info->subslice_per_slice;
+
+ /*
+ * Iterate through enabled slices and subslices to
+ * count the total enabled EU.
+ */
+ for (s = 0; s < s_max; s++) {
+ if (!(s_enable & (0x1 << s)))
+ /* skip disabled slice */
+ continue;
+
+ eu_disable = I915_READ(GEN9_EU_DISABLE(s));
+ for (ss = 0; ss < ss_max; ss++) {
+ int eu_per_ss;
+
+ if (ss_disable & (0x1 << ss))
+ /* skip disabled subslice */
+ continue;
+
+ eu_per_ss = eu_max - hweight8((eu_disable >> (ss*8)) &
+ eu_mask);
+
+ /*
+ * Record which subslice(s) has(have) 7 EUs. we
+ * can tune the hash used to spread work among
+ * subslices if they are unbalanced.
+ */
+ if (eu_per_ss == 7)
+ info->subslice_7eu[s] |= 1 << ss;
+
+ info->eu_total += eu_per_ss;
+ }
+ }
+
+ /*
+ * SKL is expected to always have a uniform distribution
+ * of EU across subslices with the exception that any one
+ * EU in any one subslice may be fused off for die
+ * recovery. BXT is expected to be perfectly uniform in EU
+ * distribution.
+ */
+ info->eu_per_subslice = info->subslice_total ?
+ DIV_ROUND_UP(info->eu_total,
+ info->subslice_total) : 0;
+ /*
+ * SKL supports slice power gating on devices with more than
+ * one slice, and supports EU power gating on devices with
+ * more than one EU pair per subslice. BXT supports subslice
+ * power gating on devices with more than one subslice, and
+ * supports EU power gating on devices with more than one EU
+ * pair per subslice.
+ */
+ info->has_slice_pg = ((IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) &&
+ (info->slice_total > 1));
+ info->has_subslice_pg = (IS_BROXTON(dev_priv) && (info->subslice_total > 1));
+ info->has_eu_pg = (info->eu_per_subslice > 2);
+
+ if (IS_BROXTON(dev_priv)) {
+#define IS_SS_DISABLED(_ss_disable, ss) (_ss_disable & (0x1 << ss))
+ /*
+ * There is a HW issue in 2x6 fused down parts that requires
+ * Pooled EU to be enabled as a WA. The pool configuration
+ * changes depending upon which subslice is fused down. This
+ * doesn't affect if the device has all 3 subslices enabled.
+ */
+ /* WaEnablePooledEuFor2x6:bxt */
+ info->has_pooled_eu = ((info->subslice_per_slice == 3) ||
+ (info->subslice_per_slice == 2 &&
+ INTEL_REVID(dev_priv) < BXT_REVID_C0));
+
+ info->min_eu_in_pool = 0;
+ if (info->has_pooled_eu) {
+ if (IS_SS_DISABLED(ss_disable, 0) ||
+ IS_SS_DISABLED(ss_disable, 2))
+ info->min_eu_in_pool = 3;
+ else if (IS_SS_DISABLED(ss_disable, 1))
+ info->min_eu_in_pool = 6;
+ else
+ info->min_eu_in_pool = 9;
+ }
+#undef IS_SS_DISABLED
+ }
+}
+
+static void broadwell_sseu_info_init(struct drm_i915_private *dev_priv)
+{
+ struct intel_device_info *info = mkwrite_device_info(dev_priv);
+ const int s_max = 3, ss_max = 3, eu_max = 8;
+ int s, ss;
+ u32 fuse2, eu_disable[s_max], s_enable, ss_disable;
+
+ fuse2 = I915_READ(GEN8_FUSE2);
+ s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;
+ ss_disable = (fuse2 & GEN8_F2_SS_DIS_MASK) >> GEN8_F2_SS_DIS_SHIFT;
+
+ eu_disable[0] = I915_READ(GEN8_EU_DISABLE0) & GEN8_EU_DIS0_S0_MASK;
+ eu_disable[1] = (I915_READ(GEN8_EU_DISABLE0) >> GEN8_EU_DIS0_S1_SHIFT) |
+ ((I915_READ(GEN8_EU_DISABLE1) & GEN8_EU_DIS1_S1_MASK) <<
+ (32 - GEN8_EU_DIS0_S1_SHIFT));
+ eu_disable[2] = (I915_READ(GEN8_EU_DISABLE1) >> GEN8_EU_DIS1_S2_SHIFT) |
+ ((I915_READ(GEN8_EU_DISABLE2) & GEN8_EU_DIS2_S2_MASK) <<
+ (32 - GEN8_EU_DIS1_S2_SHIFT));
+
+
+ info->slice_total = hweight32(s_enable);
+
+ /*
+ * The subslice disable field is global, i.e. it applies
+ * to each of the enabled slices.
+ */
+ info->subslice_per_slice = ss_max - hweight32(ss_disable);
+ info->subslice_total = info->slice_total * info->subslice_per_slice;
+
+ /*
+ * Iterate through enabled slices and subslices to
+ * count the total enabled EU.
+ */
+ for (s = 0; s < s_max; s++) {
+ if (!(s_enable & (0x1 << s)))
+ /* skip disabled slice */
+ continue;
+
+ for (ss = 0; ss < ss_max; ss++) {
+ u32 n_disabled;
+
+ if (ss_disable & (0x1 << ss))
+ /* skip disabled subslice */
+ continue;
+
+ n_disabled = hweight8(eu_disable[s] >> (ss * eu_max));
+
+ /*
+ * Record which subslices have 7 EUs.
+ */
+ if (eu_max - n_disabled == 7)
+ info->subslice_7eu[s] |= 1 << ss;
+
+ info->eu_total += eu_max - n_disabled;
+ }
+ }
+
+ /*
+ * BDW is expected to always have a uniform distribution of EU across
+ * subslices with the exception that any one EU in any one subslice may
+ * be fused off for die recovery.
+ */
+ info->eu_per_subslice = info->subslice_total ?
+ DIV_ROUND_UP(info->eu_total, info->subslice_total) : 0;
+
+ /*
+ * BDW supports slice power gating on devices with more than
+ * one slice.
+ */
+ info->has_slice_pg = (info->slice_total > 1);
+ info->has_subslice_pg = 0;
+ info->has_eu_pg = 0;
+}
+
+/*
+ * Determine various intel_device_info fields at runtime.
+ *
+ * Use it when either:
+ * - it's judged too laborious to fill n static structures with the limit
+ * when a simple if statement does the job,
+ * - run-time checks (eg read fuse/strap registers) are needed.
+ *
+ * This function needs to be called:
+ * - after the MMIO has been setup as we are reading registers,
+ * - after the PCH has been detected,
+ * - before the first usage of the fields it can tweak.
+ */
+void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)
+{
+ struct intel_device_info *info = mkwrite_device_info(dev_priv);
+ enum pipe pipe;
+
+ /*
+ * Skylake and Broxton currently don't expose the topmost plane as its
+ * use is exclusive with the legacy cursor and we only want to expose
+ * one of those, not both. Until we can safely expose the topmost plane
+ * as a DRM_PLANE_TYPE_CURSOR with all the features exposed/supported,
+ * we don't expose the topmost plane at all to prevent ABI breakage
+ * down the line.
+ */
+ if (IS_BROXTON(dev_priv)) {
+ info->num_sprites[PIPE_A] = 2;
+ info->num_sprites[PIPE_B] = 2;
+ info->num_sprites[PIPE_C] = 1;
+ } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
+ for_each_pipe(dev_priv, pipe)
+ info->num_sprites[pipe] = 2;
+ else
+ for_each_pipe(dev_priv, pipe)
+ info->num_sprites[pipe] = 1;
+
+ if (i915.disable_display) {
+ DRM_INFO("Display disabled (module parameter)\n");
+ info->num_pipes = 0;
+ } else if (info->num_pipes > 0 &&
+ (IS_GEN7(dev_priv) || IS_GEN8(dev_priv)) &&
+ HAS_PCH_SPLIT(dev_priv)) {
+ u32 fuse_strap = I915_READ(FUSE_STRAP);
+ u32 sfuse_strap = I915_READ(SFUSE_STRAP);
+
+ /*
+ * SFUSE_STRAP is supposed to have a bit signalling the display
+ * is fused off. Unfortunately it seems that, at least in
+ * certain cases, fused off display means that PCH display
+ * reads don't land anywhere. In that case, we read 0s.
+ *
+ * On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK
+ * should be set when taking over after the firmware.
+ */
+ if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE ||
+ sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED ||
+ (dev_priv->pch_type == PCH_CPT &&
+ !(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) {
+ DRM_INFO("Display fused off, disabling\n");
+ info->num_pipes = 0;
+ } else if (fuse_strap & IVB_PIPE_C_DISABLE) {
+ DRM_INFO("PipeC fused off\n");
+ info->num_pipes -= 1;
+ }
+ } else if (info->num_pipes > 0 && IS_GEN9(dev_priv)) {
+ u32 dfsm = I915_READ(SKL_DFSM);
+ u8 disabled_mask = 0;
+ bool invalid;
+ int num_bits;
+
+ if (dfsm & SKL_DFSM_PIPE_A_DISABLE)
+ disabled_mask |= BIT(PIPE_A);
+ if (dfsm & SKL_DFSM_PIPE_B_DISABLE)
+ disabled_mask |= BIT(PIPE_B);
+ if (dfsm & SKL_DFSM_PIPE_C_DISABLE)
+ disabled_mask |= BIT(PIPE_C);
+
+ num_bits = hweight8(disabled_mask);
+
+ switch (disabled_mask) {
+ case BIT(PIPE_A):
+ case BIT(PIPE_B):
+ case BIT(PIPE_A) | BIT(PIPE_B):
+ case BIT(PIPE_A) | BIT(PIPE_C):
+ invalid = true;
+ break;
+ default:
+ invalid = false;
+ }
+
+ if (num_bits > info->num_pipes || invalid)
+ DRM_ERROR("invalid pipe fuse configuration: 0x%x\n",
+ disabled_mask);
+ else
+ info->num_pipes -= num_bits;
+ }
+
+ /* Initialize slice/subslice/EU info */
+ if (IS_CHERRYVIEW(dev_priv))
+ cherryview_sseu_info_init(dev_priv);
+ else if (IS_BROADWELL(dev_priv))
+ broadwell_sseu_info_init(dev_priv);
+ else if (INTEL_INFO(dev_priv)->gen >= 9)
+ gen9_sseu_info_init(dev_priv);
+
+ info->has_snoop = !info->has_llc;
+
+ /* Snooping is broken on BXT A stepping. */
+ if (IS_BXT_REVID(dev_priv, 0, BXT_REVID_A1))
+ info->has_snoop = false;
+
+ DRM_DEBUG_DRIVER("slice total: %u\n", info->slice_total);
+ DRM_DEBUG_DRIVER("subslice total: %u\n", info->subslice_total);
+ DRM_DEBUG_DRIVER("subslice per slice: %u\n", info->subslice_per_slice);
+ DRM_DEBUG_DRIVER("EU total: %u\n", info->eu_total);
+ DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->eu_per_subslice);
+ DRM_DEBUG_DRIVER("has slice power gating: %s\n",
+ info->has_slice_pg ? "y" : "n");
+ DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
+ info->has_subslice_pg ? "y" : "n");
+ DRM_DEBUG_DRIVER("has EU power gating: %s\n",
+ info->has_eu_pg ? "y" : "n");
+}
Let's reclaim a few hundred lines from i915_drv.c by splitting out the runtime configuration of the "constant" dev_priv->info. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> --- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/i915_drv.c | 413 ++----------------------------- drivers/gpu/drm/i915/i915_drv.h | 9 + drivers/gpu/drm/i915/intel_device_info.c | 390 +++++++++++++++++++++++++++++ 4 files changed, 422 insertions(+), 391 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_device_info.c