[v3,02/12] drm/i915: Read PSR caps/intermediate freqs/etc. only once on eDP

Commit Message

Ville Syrjala July 29, 2016, 1:52 p.m. UTC

From: Ville Syrjälä <[e-mail]>

Currently we re-read a bunch of static eDP panel caps from the DPCD
over and over again. Let's do it only once to save some time and effort.

v2: Make thing less confusing with intel_edp_init_dpcd() (Chris)
    Move no_aux_handshake setup in there as well
v3: Move tps3/rate printout to intel_dp_long_pulse() so that
    we'll still get them on eDP as well

Cc: Chris Wilson <[e-mail]>
Signed-off-by: Ville Syrjälä <[e-mail]>
Reviewed-by: Chris Wilson <[e-mail]> (v1)
---
 drivers/gpu/drm/i915/intel_dp.c | 165 ++++++++++++++++++++++------------------
 1 file changed, 89 insertions(+), 76 deletions(-)

Patch

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1fe9bb745de5..0d8c3c3fccd7 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3395,20 +3395,94 @@  intel_dp_link_down(struct intel_dp *intel_dp)
 }
 
 static bool
-intel_dp_get_dpcd(struct intel_dp *intel_dp)
+intel_dp_read_dpcd(struct intel_dp *intel_dp)
 {
-	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
-	struct drm_device *dev = dig_port->base.base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
-
 	if (drm_dp_dpcd_read(&intel_dp->aux, 0x000, intel_dp->dpcd,
 			     sizeof(intel_dp->dpcd)) < 0)
 		return false; /* aux transfer failed */
 
 	DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp->dpcd), intel_dp->dpcd);
 
-	if (intel_dp->dpcd[DP_DPCD_REV] == 0)
-		return false; /* DPCD not present */
+	return intel_dp->dpcd[DP_DPCD_REV] != 0;
+}
+
+static bool
+intel_edp_init_dpcd(struct intel_dp *intel_dp)
+{
+	struct drm_i915_private *dev_priv =
+		to_i915(dp_to_dig_port(intel_dp)->base.base.dev);
+
+	/* this function is meant to be called only once */
+	WARN_ON(intel_dp->dpcd[DP_DPCD_REV] != 0);
+
+	if (!intel_dp_read_dpcd(intel_dp))
+		return false;
+
+	if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11)
+		dev_priv->no_aux_handshake = intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
+			DP_NO_AUX_HANDSHAKE_LINK_TRAINING;
+
+	/* Check if the panel supports PSR */
+	drm_dp_dpcd_read(&intel_dp->aux, DP_PSR_SUPPORT,
+			 intel_dp->psr_dpcd,
+			 sizeof(intel_dp->psr_dpcd));
+	if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) {
+		dev_priv->psr.sink_support = true;
+		DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
+	}
+
+	if (INTEL_GEN(dev_priv) >= 9 &&
+	    (intel_dp->psr_dpcd[0] & DP_PSR2_IS_SUPPORTED)) {
+		uint8_t frame_sync_cap;
+
+		dev_priv->psr.sink_support = true;
+		drm_dp_dpcd_read(&intel_dp->aux,
+				 DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
+				 &frame_sync_cap, 1);
+		dev_priv->psr.aux_frame_sync = frame_sync_cap ? true : false;
+		/* PSR2 needs frame sync as well */
+		dev_priv->psr.psr2_support = dev_priv->psr.aux_frame_sync;
+		DRM_DEBUG_KMS("PSR2 %s on sink",
+			      dev_priv->psr.psr2_support ? "supported" : "not supported");
+	}
+
+	/* Read the eDP Display control capabilities registers */
+	if ((intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) &&
+	    drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV,
+			     intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd) ==
+			     sizeof(intel_dp->edp_dpcd)))
+		DRM_DEBUG_KMS("EDP DPCD : %*ph\n", (int) sizeof(intel_dp->edp_dpcd),
+			      intel_dp->edp_dpcd);
+
+	/* Intermediate frequency support */
+	if (intel_dp->edp_dpcd[0] >= 0x03) { /* eDp v1.4 or higher */
+		__le16 sink_rates[DP_MAX_SUPPORTED_RATES];
+		int i;
+
+		drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES,
+				sink_rates, sizeof(sink_rates));
+
+		for (i = 0; i < ARRAY_SIZE(sink_rates); i++) {
+			int val = le16_to_cpu(sink_rates[i]);
+
+			if (val == 0)
+				break;
+
+			/* Value read is in kHz while drm clock is saved in deca-kHz */
+			intel_dp->sink_rates[i] = (val * 200) / 10;
+		}
+		intel_dp->num_sink_rates = i;
+	}
+
+	return true;
+}
+
+
+static bool
+intel_dp_get_dpcd(struct intel_dp *intel_dp)
+{
+	if (!intel_dp_read_dpcd(intel_dp))
+		return false;
 
 	if (drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_COUNT,
 			     &intel_dp->sink_count, 1) < 0)
@@ -3431,68 +3505,6 @@  intel_dp_get_dpcd(struct intel_dp *intel_dp)
 	if (!is_edp(intel_dp) && !intel_dp->sink_count)
 		return false;
 
-	/* Check if the panel supports PSR */
-	memset(intel_dp->psr_dpcd, 0, sizeof(intel_dp->psr_dpcd));
-	if (is_edp(intel_dp)) {
-		drm_dp_dpcd_read(&intel_dp->aux, DP_PSR_SUPPORT,
-				 intel_dp->psr_dpcd,
-				 sizeof(intel_dp->psr_dpcd));
-		if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) {
-			dev_priv->psr.sink_support = true;
-			DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
-		}
-
-		if (INTEL_INFO(dev)->gen >= 9 &&
-			(intel_dp->psr_dpcd[0] & DP_PSR2_IS_SUPPORTED)) {
-			uint8_t frame_sync_cap;
-
-			dev_priv->psr.sink_support = true;
-			drm_dp_dpcd_read(&intel_dp->aux,
-					 DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
-					 &frame_sync_cap, 1);
-			dev_priv->psr.aux_frame_sync = frame_sync_cap ? true : false;
-			/* PSR2 needs frame sync as well */
-			dev_priv->psr.psr2_support = dev_priv->psr.aux_frame_sync;
-			DRM_DEBUG_KMS("PSR2 %s on sink",
-				dev_priv->psr.psr2_support ? "supported" : "not supported");
-		}
-
-		/* Read the eDP Display control capabilities registers */
-		memset(intel_dp->edp_dpcd, 0, sizeof(intel_dp->edp_dpcd));
-		if ((intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) &&
-				(drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV,
-						intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd)) ==
-								sizeof(intel_dp->edp_dpcd)))
-			DRM_DEBUG_KMS("EDP DPCD : %*ph\n", (int) sizeof(intel_dp->edp_dpcd),
-					intel_dp->edp_dpcd);
-	}
-
-	DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n",
-		      yesno(intel_dp_source_supports_hbr2(intel_dp)),
-		      yesno(drm_dp_tps3_supported(intel_dp->dpcd)));
-
-	/* Intermediate frequency support */
-	if (is_edp(intel_dp) && (intel_dp->edp_dpcd[0] >= 0x03)) { /* eDp v1.4 or higher */
-		__le16 sink_rates[DP_MAX_SUPPORTED_RATES];
-		int i;
-
-		drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES,
-				sink_rates, sizeof(sink_rates));
-
-		for (i = 0; i < ARRAY_SIZE(sink_rates); i++) {
-			int val = le16_to_cpu(sink_rates[i]);
-
-			if (val == 0)
-				break;
-
-			/* Value read is in kHz while drm clock is saved in deca-kHz */
-			intel_dp->sink_rates[i] = (val * 200) / 10;
-		}
-		intel_dp->num_sink_rates = i;
-	}
-
-	intel_dp_print_rates(intel_dp);
-
 	if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
 	      DP_DWN_STRM_PORT_PRESENT))
 		return true; /* native DP sink */
@@ -4235,6 +4247,12 @@  intel_dp_long_pulse(struct intel_connector *intel_connector)
 	if (intel_encoder->type != INTEL_OUTPUT_EDP)
 		intel_encoder->type = INTEL_OUTPUT_DP;
 
+	DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n",
+		      yesno(intel_dp_source_supports_hbr2(intel_dp)),
+		      yesno(drm_dp_tps3_supported(intel_dp->dpcd)));
+
+	intel_dp_print_rates(intel_dp);
+
 	intel_dp_probe_oui(intel_dp);
 
 	ret = intel_dp_probe_mst(intel_dp);
@@ -5396,14 +5414,9 @@  static bool intel_edp_init_connector(struct intel_dp *intel_dp,
 	pps_unlock(intel_dp);
 
 	/* Cache DPCD and EDID for edp. */
-	has_dpcd = intel_dp_get_dpcd(intel_dp);
+	has_dpcd = intel_edp_init_dpcd(intel_dp);
 
-	if (has_dpcd) {
-		if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11)
-			dev_priv->no_aux_handshake =
-				intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
-				DP_NO_AUX_HANDSHAKE_LINK_TRAINING;
-	} else {
+	if (!has_dpcd) {
 		/* if this fails, presume the device is a ghost */
 		DRM_INFO("failed to retrieve link info, disabling eDP\n");
 		goto out_vdd_off;