@@ -2866,7 +2866,7 @@ struct drm_i915_cmd_table {
#define HAS_PCH_NOP(dev_priv) (INTEL_PCH_TYPE(dev_priv) == PCH_NOP)
#define HAS_PCH_SPLIT(dev_priv) (INTEL_PCH_TYPE(dev_priv) != PCH_NONE)
-#define HAS_GMCH_DISPLAY(dev) (INTEL_INFO(dev)->has_gmch_display)
+#define HAS_GMCH_DISPLAY(dev_priv) ((dev_priv)->info.has_gmch_display)
/* DPF == dynamic parity feature */
#define HAS_L3_DPF(dev) (INTEL_INFO(dev)->has_l3_dpf)
@@ -273,7 +273,7 @@ static void i9xx_load_luts_internal(struct drm_crtc *crtc,
enum pipe pipe = intel_crtc->pipe;
int i;
- if (HAS_GMCH_DISPLAY(dev)) {
+ if (HAS_GMCH_DISPLAY(dev_priv)) {
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI))
assert_dsi_pll_enabled(dev_priv);
else
@@ -288,7 +288,7 @@ static void i9xx_load_luts_internal(struct drm_crtc *crtc,
(drm_color_lut_extract(lut[i].green, 8) << 8) |
drm_color_lut_extract(lut[i].blue, 8);
- if (HAS_GMCH_DISPLAY(dev))
+ if (HAS_GMCH_DISPLAY(dev_priv))
I915_WRITE(PALETTE(pipe, i), word);
else
I915_WRITE(LGC_PALETTE(pipe, i), word);
@@ -297,7 +297,7 @@ static void i9xx_load_luts_internal(struct drm_crtc *crtc,
for (i = 0; i < 256; i++) {
uint32_t word = (i << 16) | (i << 8) | i;
- if (HAS_GMCH_DISPLAY(dev))
+ if (HAS_GMCH_DISPLAY(dev_priv))
I915_WRITE(PALETTE(pipe, i), word);
else
I915_WRITE(LGC_PALETTE(pipe, i), word);
@@ -5034,7 +5034,7 @@ intel_pre_disable_primary_noatomic(struct drm_crtc *crtc)
* event which is after the vblank start event, so we need to have a
* wait-for-vblank between disabling the plane and the pipe.
*/
- if (HAS_GMCH_DISPLAY(dev)) {
+ if (HAS_GMCH_DISPLAY(dev_priv)) {
intel_set_memory_cxsr(dev_priv, false);
dev_priv->wm.vlv.cxsr = false;
intel_wait_for_vblank(dev, pipe);
@@ -5099,7 +5099,7 @@ static void intel_pre_plane_update(struct intel_crtc_state *old_crtc_state)
intel_pre_disable_primary(&crtc->base);
}
- if (pipe_config->disable_cxsr && HAS_GMCH_DISPLAY(dev)) {
+ if (pipe_config->disable_cxsr && HAS_GMCH_DISPLAY(dev_priv)) {
crtc->wm.cxsr_allowed = false;
/*
@@ -10893,7 +10893,7 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
pos |= y << CURSOR_Y_SHIFT;
/* ILK+ do this automagically */
- if (HAS_GMCH_DISPLAY(dev) &&
+ if (HAS_GMCH_DISPLAY(dev_priv) &&
plane_state->base.rotation == DRM_ROTATE_180) {
base += (plane_state->base.crtc_h *
plane_state->base.crtc_w - 1) * 4;
@@ -16591,7 +16591,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
if (crtc->active && !intel_crtc_has_encoders(crtc))
intel_crtc_disable_noatomic(&crtc->base);
- if (crtc->active || HAS_GMCH_DISPLAY(dev)) {
+ if (crtc->active || HAS_GMCH_DISPLAY(dev_priv)) {
/*
* We start out with underrun reporting disabled to avoid races.
* For correct bookkeeping mark this on active crtcs.
@@ -1583,7 +1583,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
return ret;
}
- if (HAS_GMCH_DISPLAY(dev))
+ if (HAS_GMCH_DISPLAY(dev_priv))
intel_gmch_panel_fitting(intel_crtc, pipe_config,
intel_connector->panel.fitting_mode);
else
@@ -1346,7 +1346,7 @@ static int intel_dsi_set_property(struct drm_connector *connector,
DRM_DEBUG_KMS("no scaling not supported\n");
return -EINVAL;
}
- if (HAS_GMCH_DISPLAY(dev) &&
+ if (HAS_GMCH_DISPLAY(to_i915(dev)) &&
val == DRM_MODE_SCALE_CENTER) {
DRM_DEBUG_KMS("centering not supported\n");
return -EINVAL;
@@ -254,7 +254,7 @@ static bool __intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
old = !intel_crtc->cpu_fifo_underrun_disabled;
intel_crtc->cpu_fifo_underrun_disabled = !enable;
- if (HAS_GMCH_DISPLAY(dev))
+ if (HAS_GMCH_DISPLAY(dev_priv))
i9xx_set_fifo_underrun_reporting(dev, pipe, enable, old);
else if (IS_GEN5(dev) || IS_GEN6(dev))
ironlake_set_fifo_underrun_reporting(dev, pipe, enable);
@@ -1265,6 +1265,7 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
{
struct intel_hdmi *hdmi = intel_attached_hdmi(connector);
struct drm_device *dev = intel_hdmi_to_dev(hdmi);
+ struct drm_i915_private *dev_priv = to_i915(dev);
enum drm_mode_status status;
int clock;
int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
@@ -1287,7 +1288,7 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
status = hdmi_port_clock_valid(hdmi, clock, true);
/* if we can't do 8bpc we may still be able to do 12bpc */
- if (!HAS_GMCH_DISPLAY(dev) && status != MODE_OK)
+ if (!HAS_GMCH_DISPLAY(dev_priv) && status != MODE_OK)
status = hdmi_port_clock_valid(hdmi, clock * 3 / 2, true);
return status;
@@ -1297,7 +1298,7 @@ static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state)
{
struct drm_device *dev = crtc_state->base.crtc->dev;
- if (HAS_GMCH_DISPLAY(dev))
+ if (HAS_GMCH_DISPLAY(to_i915(dev)))
return false;
/*