@@ -109,10 +109,48 @@ static void gen11_dsi_power_up_lanes(struct intel_encoder *encoder)
}
}
+static void gen11_dsi_config_phy_lanes_sequence(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+ u32 tmp;
+ int lane;
+
+ /* Step 4b(i) set loadgen select for transmit and aux lanes */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ tmp = I915_READ(ICL_PORT_TX_DW4_AUX(port));
+ tmp &= ~LOADGEN_SELECT;
+ I915_WRITE(ICL_PORT_TX_DW4_AUX(port), tmp);
+ for (lane = 0; lane <= 3; lane++) {
+ tmp = I915_READ(ICL_PORT_TX_DW4_LN(port, lane));
+ tmp &= ~LOADGEN_SELECT;
+ if (lane != 2)
+ tmp |= LOADGEN_SELECT;
+ I915_WRITE(ICL_PORT_TX_DW4_LN(port, lane), tmp);
+ }
+ }
+
+ /* Step 4b(ii) set latency optimization for transmit and aux lanes */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ tmp = I915_READ(ICL_PORT_TX_DW2_AUX(port));
+ tmp &= ~FRC_LATENCY_OPTIM_MASK;
+ tmp |= FRC_LATENCY_OPTIM_VAL(0x5);
+ I915_WRITE(ICL_PORT_TX_DW2_AUX(port), tmp);
+ tmp = I915_READ(ICL_PORT_TX_DW2_LN0(port));
+ tmp &= ~FRC_LATENCY_OPTIM_MASK;
+ tmp |= FRC_LATENCY_OPTIM_VAL(0x5);
+ I915_WRITE(ICL_PORT_TX_DW2_GRP(port), tmp);
+ }
+}
+
static void gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder)
{
/* step 4a: power up all lanes of the DDI used by DSI */
gen11_dsi_power_up_lanes(encoder);
+
+ /* step 4b: configure lane sequencing of the Combo-PHY transmitters */
+ gen11_dsi_config_phy_lanes_sequence(encoder);
}
static void __attribute__((unused)) gen11_dsi_pre_enable(
This patch set the loadgen select and latency optimization for aux and transmit lanes of combo phy transmitters. It will be used for MIPI DSI HS operations. Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> --- drivers/gpu/drm/i915/intel_dsi_new.c | 38 ++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)