@@ -142,6 +142,7 @@ i915-y += dvo_ch7017.o \
intel_dp_mst.o \
intel_dp.o \
intel_dsi.o \
+ gen11_dsi.o \
intel_dsi_dcs_backlight.o \
intel_dsi_pll.o \
intel_dsi_vbt.o \
new file mode 100644
@@ -0,0 +1,64 @@
+/*
+ * Copyright © 2018 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Madhav Chauhan <madhav.chauhan@intel.com>
+ * Jani Nikula <jani.nikula@intel.com>
+ */
+
+#include "intel_dsi.h"
+
+static void gen11_dsi_program_esc_clk_div(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+ u32 bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
+ u32 afe_clk_khz; /* 8X Clock */
+ u32 esc_clk_div_m;
+
+ afe_clk_khz = DIV_ROUND_CLOSEST(intel_dsi->pclk * bpp,
+ intel_dsi->lane_count);
+
+ esc_clk_div_m = DIV_ROUND_UP(afe_clk_khz, DSI_MAX_ESC_CLK);
+
+ for_each_dsi_port(port, intel_dsi->ports) {
+ I915_WRITE(ICL_DSI_ESC_CLK_DIV(port),
+ esc_clk_div_m & ICL_ESC_CLK_DIV_MASK);
+ POSTING_READ(ICL_DSI_ESC_CLK_DIV(port));
+ }
+
+ for_each_dsi_port(port, intel_dsi->ports) {
+ I915_WRITE(ICL_DPHY_ESC_CLK_DIV(port),
+ esc_clk_div_m & ICL_ESC_CLK_DIV_MASK);
+ POSTING_READ(ICL_DPHY_ESC_CLK_DIV(port));
+ }
+}
+
+static void __attribute__((unused))
+gen11_dsi_pre_enable(struct intel_encoder *encoder,
+ const struct intel_crtc_state *pipe_config,
+ const struct drm_connector_state *conn_state)
+{
+ /* step3: enable DSI PLL */
+ gen11_dsi_program_esc_clk_div(encoder);
+}
@@ -9536,6 +9536,7 @@ enum skl_power_gate {
#define ICL_BYTE_CLK_PER_ESC_CLK_SHIFT 16
#define ICL_ESC_CLK_DIV_MASK 0x1ff
#define ICL_ESC_CLK_DIV_SHIFT 0
+#define DSI_MAX_ESC_CLK 20000 /* in KHz */
/* Gen4+ Timestamp and Pipe Frame time stamp registers */
#define GEN4_TIMESTAMP _MMIO(0x2358)
Escape Clock is used for LP communication across the DSI Link. To achieve the constant frequency of the escape clock from the variable DPLL frequency output, a variable divider(M) is needed. This patch programs the same. v2: (Jani N) Don't end line with "(". Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> --- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/gen11_dsi.c | 64 ++++++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/i915_reg.h | 1 + 3 files changed, 66 insertions(+) create mode 100644 drivers/gpu/drm/i915/gen11_dsi.c