Message ID | 1538034499-31256-2-git-send-email-shawn.c.lee@intel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [1/2] drm/i915: Add new AML_ULX support list | expand |
On Thu, 2018-09-27 at 00:48 -0700, Lee, Shawn C wrote: > Amber Lake used the same gen graphics as Kaby Lake. Kernel driver > should configure KBL's DDI buffer setting for AML ULX as well. > > So far, driver would load DDI translation table that used for > KBL H/S platform and apply it on AML devices. But AML is belong to > ULX series. This change will lead driver to apply KBL-Y's DDI table > for AML devices to avoid unexpected eDP/DP signal quality issue. > > Cc: Jani Nikula <jani.nikula@intel.com> > Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> > Cc: Jose Roberto de Souza <jose.souza@intel.com> On both patches: Reviewed-by: José Roberto de Souza <jose.souza@intel.com> > Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com> > --- > drivers/gpu/drm/i915/intel_ddi.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_ddi.c > b/drivers/gpu/drm/i915/intel_ddi.c > index b6910c8b4e08..b051970912a3 100644 > --- a/drivers/gpu/drm/i915/intel_ddi.c > +++ b/drivers/gpu/drm/i915/intel_ddi.c > @@ -642,7 +642,7 @@ skl_get_buf_trans_dp(struct drm_i915_private > *dev_priv, int *n_entries) > static const struct ddi_buf_trans * > kbl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int > *n_entries) > { > - if (IS_KBL_ULX(dev_priv)) { > + if (IS_KBL_ULX(dev_priv) || IS_AML_ULX(dev_priv)) { > *n_entries = ARRAY_SIZE(kbl_y_ddi_translations_dp); > return kbl_y_ddi_translations_dp; > } else if (IS_KBL_ULT(dev_priv) || IS_CFL_ULT(dev_priv)) { > @@ -658,7 +658,7 @@ static const struct ddi_buf_trans * > skl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int > *n_entries) > { > if (dev_priv->vbt.edp.low_vswing) { > - if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { > + if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv) || > IS_AML_ULX(dev_priv)) { > *n_entries = > ARRAY_SIZE(skl_y_ddi_translations_edp); > return skl_y_ddi_translations_edp; > } else if (IS_SKL_ULT(dev_priv) || IS_KBL_ULT(dev_priv) > || > @@ -680,7 +680,7 @@ skl_get_buf_trans_edp(struct drm_i915_private > *dev_priv, int *n_entries) > static const struct ddi_buf_trans * > skl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int > *n_entries) > { > - if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { > + if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv) || > IS_AML_ULX(dev_priv)) { > *n_entries = ARRAY_SIZE(skl_y_ddi_translations_hdmi); > return skl_y_ddi_translations_hdmi; > } else {
On Thu, Sep 27, 2018 at 05:35:00PM +0000, Souza, Jose wrote: > On Thu, 2018-09-27 at 00:48 -0700, Lee, Shawn C wrote: > > Amber Lake used the same gen graphics as Kaby Lake. Kernel driver > > should configure KBL's DDI buffer setting for AML ULX as well. > > > > So far, driver would load DDI translation table that used for > > KBL H/S platform and apply it on AML devices. But AML is belong to > > ULX series. This change will lead driver to apply KBL-Y's DDI table > > for AML devices to avoid unexpected eDP/DP signal quality issue. > > > > Cc: Jani Nikula <jani.nikula@intel.com> > > Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> > > Cc: Jose Roberto de Souza <jose.souza@intel.com> > > On both patches: > Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Pushed both patches to dinq. I accidentally forgot to propagate the rv-b to one of the patches. I'm so sorry... > > > Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com> > > --- > > drivers/gpu/drm/i915/intel_ddi.c | 6 +++--- > > 1 file changed, 3 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/gpu/drm/i915/intel_ddi.c > > b/drivers/gpu/drm/i915/intel_ddi.c > > index b6910c8b4e08..b051970912a3 100644 > > --- a/drivers/gpu/drm/i915/intel_ddi.c > > +++ b/drivers/gpu/drm/i915/intel_ddi.c > > @@ -642,7 +642,7 @@ skl_get_buf_trans_dp(struct drm_i915_private > > *dev_priv, int *n_entries) > > static const struct ddi_buf_trans * > > kbl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int > > *n_entries) > > { > > - if (IS_KBL_ULX(dev_priv)) { > > + if (IS_KBL_ULX(dev_priv) || IS_AML_ULX(dev_priv)) { > > *n_entries = ARRAY_SIZE(kbl_y_ddi_translations_dp); > > return kbl_y_ddi_translations_dp; > > } else if (IS_KBL_ULT(dev_priv) || IS_CFL_ULT(dev_priv)) { > > @@ -658,7 +658,7 @@ static const struct ddi_buf_trans * > > skl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int > > *n_entries) > > { > > if (dev_priv->vbt.edp.low_vswing) { > > - if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { > > + if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv) || > > IS_AML_ULX(dev_priv)) { > > *n_entries = > > ARRAY_SIZE(skl_y_ddi_translations_edp); > > return skl_y_ddi_translations_edp; > > } else if (IS_SKL_ULT(dev_priv) || IS_KBL_ULT(dev_priv) > > || > > @@ -680,7 +680,7 @@ skl_get_buf_trans_edp(struct drm_i915_private > > *dev_priv, int *n_entries) > > static const struct ddi_buf_trans * > > skl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int > > *n_entries) > > { > > - if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { > > + if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv) || > > IS_AML_ULX(dev_priv)) { > > *n_entries = ARRAY_SIZE(skl_y_ddi_translations_hdmi); > > return skl_y_ddi_translations_hdmi; > > } else { > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index b6910c8b4e08..b051970912a3 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -642,7 +642,7 @@ skl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries) static const struct ddi_buf_trans * kbl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries) { - if (IS_KBL_ULX(dev_priv)) { + if (IS_KBL_ULX(dev_priv) || IS_AML_ULX(dev_priv)) { *n_entries = ARRAY_SIZE(kbl_y_ddi_translations_dp); return kbl_y_ddi_translations_dp; } else if (IS_KBL_ULT(dev_priv) || IS_CFL_ULT(dev_priv)) { @@ -658,7 +658,7 @@ static const struct ddi_buf_trans * skl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries) { if (dev_priv->vbt.edp.low_vswing) { - if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { + if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv) || IS_AML_ULX(dev_priv)) { *n_entries = ARRAY_SIZE(skl_y_ddi_translations_edp); return skl_y_ddi_translations_edp; } else if (IS_SKL_ULT(dev_priv) || IS_KBL_ULT(dev_priv) || @@ -680,7 +680,7 @@ skl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries) static const struct ddi_buf_trans * skl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries) { - if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { + if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv) || IS_AML_ULX(dev_priv)) { *n_entries = ARRAY_SIZE(skl_y_ddi_translations_hdmi); return skl_y_ddi_translations_hdmi; } else {
Amber Lake used the same gen graphics as Kaby Lake. Kernel driver should configure KBL's DDI buffer setting for AML ULX as well. So far, driver would load DDI translation table that used for KBL H/S platform and apply it on AML devices. But AML is belong to ULX series. This change will lead driver to apply KBL-Y's DDI table for AML devices to avoid unexpected eDP/DP signal quality issue. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jose Roberto de Souza <jose.souza@intel.com> Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com> --- drivers/gpu/drm/i915/intel_ddi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)