@@ -45,6 +45,12 @@ IGT_TEST_DESCRIPTION("Test the i915 perf metrics streaming interface");
#define GEN6_MI_REPORT_PERF_COUNT ((0x28 << 23) | (3 - 2))
#define GEN8_MI_REPORT_PERF_COUNT ((0x28 << 23) | (4 - 2))
+#define OAREPORT_REASON_MASK 0x3f
+#define OAREPORT_REASON_SHIFT 19
+#define OAREPORT_REASON_TIMER (1<<0)
+#define OAREPORT_REASON_CTX_SWITCH (1<<3)
+#define OAREPORT_REASON_CLK_RATIO (1<<5)
+
#define GFX_OP_PIPE_CONTROL ((3 << 29) | (3 << 27) | (2 << 24))
#define PIPE_CONTROL_CS_STALL (1 << 20)
#define PIPE_CONTROL_GLOBAL_SNAPSHOT_COUNT_RESET (1 << 19)
@@ -1478,6 +1484,7 @@ test_blocking(void)
int64_t test_duration_ns = tick_ns * 1000;
int max_iterations = (test_duration_ns / oa_period) + 1;
+ int n_extra_iterations = 0;
/* It's a bit tricky to put a lower limit here, but we expect a
* relatively low latency for seeing reports, while we don't currently
@@ -1518,6 +1525,9 @@ test_blocking(void)
* We Loop for 1000 x tick_ns so one tick corresponds to 0.1%
*/
for (start = get_time(); (get_time() - start) < test_duration_ns; /* nop */) {
+ struct drm_i915_perf_record_header *header;
+ bool timer_report_read = false;
+ bool non_timer_report_read = false;
int ret;
while ((ret = read(stream_fd, buf, sizeof(buf))) < 0 &&
@@ -1526,6 +1536,36 @@ test_blocking(void)
igt_assert(ret > 0);
+ /* For Haswell reports don't contain a well defined reason
+ * field we so assume all reports to be 'periodic'. For gen8+
+ * we want to to consider that the HW automatically writes some
+ * non periodic reports (e.g. on context switch) which might
+ * lead to more successful read()s than expected due to
+ * periodic sampling and we don't want these extra reads to
+ * cause the test to fail...
+ */
+ if (intel_gen(devid) >= 8) {
+ for (int offset = 0; offset < ret; offset += header->size) {
+ header = (void *)(buf + offset);
+
+ if (header->type == DRM_I915_PERF_RECORD_SAMPLE) {
+ uint32_t *report = (void *)(header + 1);
+
+ uint32_t reason = ((report[0] >>
+ OAREPORT_REASON_SHIFT) &
+ OAREPORT_REASON_MASK);
+
+ if (reason & OAREPORT_REASON_TIMER)
+ timer_report_read = true;
+ else
+ non_timer_report_read = true;
+ }
+ }
+ }
+
+ if (non_timer_report_read && !timer_report_read)
+ n_extra_iterations++;
+
n++;
}
@@ -1537,7 +1577,10 @@ test_blocking(void)
user_ns = (end_times.tms_utime - start_times.tms_utime) * tick_ns;
kernel_ns = (end_times.tms_stime - start_times.tms_stime) * tick_ns;
- igt_debug("%d blocking reads during test with ~25Hz OA sampling\n", n);
+ igt_debug("%d blocking reads during test with ~25Hz OA sampling (expect no more than %d)\n",
+ n, max_iterations);
+ igt_debug("%d extra iterations seen, not related to periodic sampling (e.g. context switches)\n",
+ n_extra_iterations);
igt_debug("time in userspace = %"PRIu64"ns (+-%dns) (start utime = %d, end = %d)\n",
user_ns, (int)tick_ns,
(int)start_times.tms_utime, (int)end_times.tms_utime);
@@ -1548,12 +1591,12 @@ test_blocking(void)
/* With completely broken blocking (but also not returning an error) we
* could end up with an open loop,
*/
- igt_assert(n <= max_iterations);
+ igt_assert(n <= (max_iterations + n_extra_iterations));
/* Make sure the driver is reporting new samples with a reasonably
* low latency...
*/
- igt_assert(n > min_iterations);
+ igt_assert(n > (min_iterations + n_extra_iterations));
igt_assert(kernel_ns <= (test_duration_ns / 100ull));
@@ -1595,6 +1638,7 @@ test_polling(void)
int64_t test_duration_ns = tick_ns * 1000;
int max_iterations = (test_duration_ns / oa_period) + 1;
+ int n_extra_iterations = 0;
/* It's a bit tricky to put a lower limit here, but we expect a
* relatively low latency for seeing reports, while we don't currently
@@ -1635,6 +1679,9 @@ test_polling(void)
*/
for (start = get_time(); (get_time() - start) < test_duration_ns; /* nop */) {
struct pollfd pollfd = { .fd = stream_fd, .events = POLLIN };
+ struct drm_i915_perf_record_header *header;
+ bool timer_report_read = false;
+ bool non_timer_report_read = false;
int ret;
while ((ret = poll(&pollfd, 1, -1)) < 0 &&
@@ -1663,6 +1710,36 @@ test_polling(void)
igt_debug("Unexpected error when reading after poll = %d\n", errno);
igt_assert_neq(ret, -1);
+ /* For Haswell reports don't contain a well defined reason
+ * field we so assume all reports to be 'periodic'. For gen8+
+ * we want to to consider that the HW automatically writes some
+ * non periodic reports (e.g. on context switch) which might
+ * lead to more successful read()s than expected due to
+ * periodic sampling and we don't want these extra reads to
+ * cause the test to fail...
+ */
+ if (intel_gen(devid) >= 8) {
+ for (int offset = 0; offset < ret; offset += header->size) {
+ header = (void *)(buf + offset);
+
+ if (header->type == DRM_I915_PERF_RECORD_SAMPLE) {
+ uint32_t *report = (void *)(header + 1);
+
+ uint32_t reason = ((report[0] >>
+ OAREPORT_REASON_SHIFT) &
+ OAREPORT_REASON_MASK);
+
+ if (reason & OAREPORT_REASON_TIMER)
+ timer_report_read = true;
+ else
+ non_timer_report_read = true;
+ }
+ }
+ }
+
+ if (non_timer_report_read && !timer_report_read)
+ n_extra_iterations++;
+
/* At this point, after consuming pending reports (and hoping
* the scheduler hasn't stopped us for too long we now
* expect EAGAIN on read.
@@ -1684,7 +1761,10 @@ test_polling(void)
user_ns = (end_times.tms_utime - start_times.tms_utime) * tick_ns;
kernel_ns = (end_times.tms_stime - start_times.tms_stime) * tick_ns;
- igt_debug("%d blocking poll()s during test with ~25Hz OA sampling\n", n);
+ igt_debug("%d blocking reads during test with ~25Hz OA sampling (expect no more than %d)\n",
+ n, max_iterations);
+ igt_debug("%d extra iterations seen, not related to periodic sampling (e.g. context switches)\n",
+ n_extra_iterations);
igt_debug("time in userspace = %"PRIu64"ns (+-%dns) (start utime = %d, end = %d)\n",
user_ns, (int)tick_ns,
(int)start_times.tms_utime, (int)end_times.tms_utime);
@@ -1695,12 +1775,12 @@ test_polling(void)
/* With completely broken blocking while polling (but still somehow
* reporting a POLLIN event) we could end up with an open loop.
*/
- igt_assert(n <= max_iterations);
+ igt_assert(n <= (max_iterations + n_extra_iterations));
/* Make sure the driver is reporting new samples with a reasonably
* low latency...
*/
- igt_assert(n > min_iterations);
+ igt_assert(n > (min_iterations + n_extra_iterations));
igt_assert(kernel_ns <= (test_duration_ns / 100ull));