@@ -6481,6 +6481,9 @@ enum {
#define _PLANE_BUF_CFG_1_B 0x7127c
#define _PLANE_BUF_CFG_2_B 0x7137c
+#define SKL_DDB_ENTRY_MASK 0x3FF
+#define ICL_DDB_ENTRY_MASK 0x7FF
+#define DDB_ENTRY_END_SHIFT 16
#define _PLANE_BUF_CFG_1(pipe) \
_PIPE(pipe, _PLANE_BUF_CFG_1_A, _PLANE_BUF_CFG_1_B)
#define _PLANE_BUF_CFG_2(pipe) \
@@ -3864,10 +3864,18 @@ static unsigned int skl_cursor_allocation(int num_active)
return 8;
}
-static void skl_ddb_entry_init_from_hw(struct skl_ddb_entry *entry, u32 reg)
+static void skl_ddb_entry_init_from_hw(struct drm_i915_private *dev_priv,
+ struct skl_ddb_entry *entry, u32 reg)
{
- entry->start = reg & 0x3ff;
- entry->end = (reg >> 16) & 0x3ff;
+ u16 mask;
+
+ if (INTEL_GEN(dev_priv) >= 11)
+ mask = ICL_DDB_ENTRY_MASK;
+ else
+ mask = SKL_DDB_ENTRY_MASK;
+ entry->start = reg & mask;
+ entry->end = (reg >> DDB_ENTRY_END_SHIFT) & mask;
+
if (entry->end)
entry->end += 1;
}
@@ -3884,7 +3892,8 @@ skl_ddb_get_hw_plane_state(struct drm_i915_private *dev_priv,
/* Cursor doesn't support NV12/planar, so no extra calculation needed */
if (plane_id == PLANE_CURSOR) {
val = I915_READ(CUR_BUF_CFG(pipe));
- skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane_id], val);
+ skl_ddb_entry_init_from_hw(dev_priv,
+ &ddb->plane[pipe][plane_id], val);
return;
}
@@ -3903,10 +3912,13 @@ skl_ddb_get_hw_plane_state(struct drm_i915_private *dev_priv,
val2 = I915_READ(PLANE_NV12_BUF_CFG(pipe, plane_id));
if (fourcc == DRM_FORMAT_NV12) {
- skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane_id], val2);
- skl_ddb_entry_init_from_hw(&ddb->uv_plane[pipe][plane_id], val);
+ skl_ddb_entry_init_from_hw(dev_priv,
+ &ddb->plane[pipe][plane_id], val2);
+ skl_ddb_entry_init_from_hw(dev_priv,
+ &ddb->uv_plane[pipe][plane_id], val);
} else {
- skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane_id], val);
+ skl_ddb_entry_init_from_hw(dev_priv,
+ &ddb->plane[pipe][plane_id], val);
}
}
Gen11/ICL onward ddb entry start/end mask is increased from 10 bits to 11 bits. This patch make changes to use proper mask for ICL+ during hardware ddb value readout. Changes since V1: - Use _MASK & _SHIFT macro (James) Changes since V2: - use kernel type u8 instead of uint8_t Changes since V3: - Rebase Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> --- drivers/gpu/drm/i915/i915_reg.h | 3 +++ drivers/gpu/drm/i915/intel_pm.c | 26 +++++++++++++++++++------- 2 files changed, 22 insertions(+), 7 deletions(-)