@@ -2630,8 +2630,6 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
{
struct drm_i915_private *dev_priv = node_to_i915(m->private);
u32 psrperf = 0;
- u32 stat[3];
- enum pipe pipe;
bool enabled = false;
bool sink_support;
@@ -2652,47 +2650,17 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
seq_printf(m, "Re-enable work scheduled: %s\n",
yesno(work_busy(&dev_priv->psr.work.work)));
- if (HAS_DDI(dev_priv)) {
- if (dev_priv->psr.psr2_enabled)
- enabled = I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE;
- else
- enabled = I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE;
- } else {
- for_each_pipe(dev_priv, pipe) {
- enum transcoder cpu_transcoder =
- intel_pipe_to_cpu_transcoder(dev_priv, pipe);
- enum intel_display_power_domain power_domain;
-
- power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
- if (!intel_display_power_get_if_enabled(dev_priv,
- power_domain))
- continue;
-
- stat[pipe] = I915_READ(VLV_PSRSTAT(pipe)) &
- VLV_EDP_PSR_CURR_STATE_MASK;
- if ((stat[pipe] == VLV_EDP_PSR_ACTIVE_NORFB_UP) ||
- (stat[pipe] == VLV_EDP_PSR_ACTIVE_SF_UPDATE))
- enabled = true;
-
- intel_display_power_put(dev_priv, power_domain);
- }
- }
+ if (dev_priv->psr.psr2_enabled)
+ enabled = I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE;
+ else
+ enabled = I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE;
seq_printf(m, "Main link in standby mode: %s\n",
yesno(dev_priv->psr.link_standby));
seq_printf(m, "HW Enabled & Active bit: %s", yesno(enabled));
- if (!HAS_DDI(dev_priv))
- for_each_pipe(dev_priv, pipe) {
- if ((stat[pipe] == VLV_EDP_PSR_ACTIVE_NORFB_UP) ||
- (stat[pipe] == VLV_EDP_PSR_ACTIVE_SF_UPDATE))
- seq_printf(m, " pipe %c", pipe_name(pipe));
- }
- seq_puts(m, "\n");
-
/*
- * VLV/CHV PSR has no kind of performance counter
* SKL+ Perf counter is reset to 0 everytime DC state is entered
*/
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
@@ -340,7 +340,6 @@ static const struct intel_device_info intel_valleyview_info = {
GEN(7),
.is_lp = 1,
.num_pipes = 2,
- .has_psr = 1,
.has_runtime_pm = 1,
.has_rc6 = 1,
.has_gmch_display = 1,
@@ -433,7 +432,6 @@ static const struct intel_device_info intel_cherryview_info = {
.is_lp = 1,
.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
.has_64bit_reloc = 1,
- .has_psr = 1,
.has_runtime_pm = 1,
.has_resource_streamer = 1,
.has_rc6 = 1,
@@ -1912,8 +1912,6 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,
unsigned frontbuffer_bits,
enum fb_op_origin origin);
void intel_psr_init(struct drm_i915_private *dev_priv);
-void intel_psr_single_frame_update(struct drm_i915_private *dev_priv,
- unsigned frontbuffer_bits);
void intel_psr_compute_config(struct intel_dp *intel_dp,
struct intel_crtc_state *crtc_state);
void intel_psr_irq_control(struct drm_i915_private *dev_priv, bool debug);
@@ -153,8 +153,6 @@ void intel_frontbuffer_flip_prepare(struct drm_i915_private *dev_priv,
/* Remove stale busy bits due to the old buffer. */
dev_priv->fb_tracking.busy_bits &= ~frontbuffer_bits;
spin_unlock(&dev_priv->fb_tracking.lock);
-
- intel_psr_single_frame_update(dev_priv, frontbuffer_bits);
}
/**
@@ -97,10 +97,6 @@ void intel_psr_irq_control(struct drm_i915_private *dev_priv, bool debug)
{
u32 debug_mask, mask;
- /* No PSR interrupts on VLV/CHV */
- if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
- return;
-
mask = EDP_PSR_ERROR(TRANSCODER_EDP);
debug_mask = EDP_PSR_POST_EXIT(TRANSCODER_EDP) |
EDP_PSR_PRE_ENTRY(TRANSCODER_EDP);
@@ -284,31 +280,6 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
}
}
-static bool vlv_is_psr_active_on_pipe(struct drm_device *dev, int pipe)
-{
- struct drm_i915_private *dev_priv = to_i915(dev);
- uint32_t val;
-
- val = I915_READ(VLV_PSRSTAT(pipe)) &
- VLV_EDP_PSR_CURR_STATE_MASK;
- return (val == VLV_EDP_PSR_ACTIVE_NORFB_UP) ||
- (val == VLV_EDP_PSR_ACTIVE_SF_UPDATE);
-}
-
-static void vlv_psr_setup_vsc(struct intel_dp *intel_dp,
- const struct intel_crtc_state *crtc_state)
-{
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- uint32_t val;
-
- /* VLV auto-generate VSC package as per EDP 1.3 spec, Table 3.10 */
- val = I915_READ(VLV_VSCSDP(crtc->pipe));
- val &= ~VLV_EDP_PSR_SDP_FREQ_MASK;
- val |= VLV_EDP_PSR_SDP_FREQ_EVFRAME;
- I915_WRITE(VLV_VSCSDP(crtc->pipe), val);
-}
-
static void hsw_psr_setup_vsc(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
@@ -341,12 +312,6 @@ static void hsw_psr_setup_vsc(struct intel_dp *intel_dp,
DP_SDP_VSC, &psr_vsc, sizeof(psr_vsc));
}
-static void vlv_psr_enable_sink(struct intel_dp *intel_dp)
-{
- drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
- DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
-}
-
static void hsw_psr_setup_aux(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
@@ -403,38 +368,6 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
}
-static void vlv_psr_enable_source(struct intel_dp *intel_dp,
- const struct intel_crtc_state *crtc_state)
-{
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
-
- /* Transition from PSR_state 0 (disabled) to PSR_state 1 (inactive) */
- I915_WRITE(VLV_PSRCTL(crtc->pipe),
- VLV_EDP_PSR_MODE_SW_TIMER |
- VLV_EDP_PSR_SRC_TRANSMITTER_STATE |
- VLV_EDP_PSR_ENABLE);
-}
-
-static void vlv_psr_activate(struct intel_dp *intel_dp)
-{
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = dig_port->base.base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct drm_crtc *crtc = dig_port->base.base.crtc;
- enum pipe pipe = to_intel_crtc(crtc)->pipe;
-
- /*
- * Let's do the transition from PSR_state 1 (inactive) to
- * PSR_state 2 (transition to active - static frame transmission).
- * Then Hardware is responsible for the transition to
- * PSR_state 3 (active - no Remote Frame Buffer (RFB) update).
- */
- I915_WRITE(VLV_PSRCTL(pipe), I915_READ(VLV_PSRCTL(pipe)) |
- VLV_EDP_PSR_ACTIVE_ENTRY);
-}
-
static void hsw_activate_psr1(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
@@ -602,17 +535,11 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
* ones. Since by Display design transcoder EDP is tied to port A
* we can safely escape based on the port A.
*/
- if (HAS_DDI(dev_priv) && dig_port->base.port != PORT_A) {
+ if (dig_port->base.port != PORT_A) {
DRM_DEBUG_KMS("PSR condition failed: Port not supported\n");
return;
}
- if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
- !dev_priv->psr.link_standby) {
- DRM_ERROR("PSR condition failed: Link off requested but not supported on this platform\n");
- return;
- }
-
if (IS_HASWELL(dev_priv) &&
I915_READ(HSW_STEREO_3D_CTL(crtc_state->cpu_transcoder)) &
S3D_ENABLE) {
@@ -760,7 +687,6 @@ void intel_psr_enable(struct intel_dp *intel_dp,
* enabled.
* However on some platforms we face issues when first
* activation follows a modeset so quickly.
- * - On VLV/CHV we get bank screen on first activation
* - On HSW/BDW we get a recoverable frozen screen until
* next exit-activate sequence.
*/
@@ -772,36 +698,6 @@ void intel_psr_enable(struct intel_dp *intel_dp,
mutex_unlock(&dev_priv->psr.lock);
}
-static void vlv_psr_disable(struct intel_dp *intel_dp,
- const struct intel_crtc_state *old_crtc_state)
-{
- struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = intel_dig_port->base.base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
- uint32_t val;
-
- if (dev_priv->psr.active) {
- /* Put VLV PSR back to PSR_state 0 (disabled). */
- if (intel_wait_for_register(dev_priv,
- VLV_PSRSTAT(crtc->pipe),
- VLV_EDP_PSR_IN_TRANS,
- 0,
- 1))
- WARN(1, "PSR transition took longer than expected\n");
-
- val = I915_READ(VLV_PSRCTL(crtc->pipe));
- val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
- val &= ~VLV_EDP_PSR_ENABLE;
- val &= ~VLV_EDP_PSR_MODE_MASK;
- I915_WRITE(VLV_PSRCTL(crtc->pipe), val);
-
- dev_priv->psr.active = false;
- } else {
- WARN_ON(vlv_is_psr_active_on_pipe(dev, crtc->pipe));
- }
-}
-
static void hsw_psr_disable(struct intel_dp *intel_dp,
const struct intel_crtc_state *old_crtc_state)
{
@@ -894,21 +790,12 @@ static bool psr_wait_for_idle(struct drm_i915_private *dev_priv)
if (!intel_dp)
return false;
- if (HAS_DDI(dev_priv)) {
- if (dev_priv->psr.psr2_enabled) {
- reg = EDP_PSR2_STATUS;
- mask = EDP_PSR2_STATUS_STATE_MASK;
- } else {
- reg = EDP_PSR_STATUS;
- mask = EDP_PSR_STATUS_STATE_MASK;
- }
+ if (dev_priv->psr.psr2_enabled) {
+ reg = EDP_PSR2_STATUS;
+ mask = EDP_PSR2_STATUS_STATE_MASK;
} else {
- struct drm_crtc *crtc =
- dp_to_dig_port(intel_dp)->base.base.crtc;
- enum pipe pipe = to_intel_crtc(crtc)->pipe;
-
- reg = VLV_PSRSTAT(pipe);
- mask = VLV_EDP_PSR_IN_TRANS;
+ reg = EDP_PSR_STATUS;
+ mask = EDP_PSR_STATUS_STATE_MASK;
}
mutex_unlock(&dev_priv->psr.lock);
@@ -953,102 +840,23 @@ static void intel_psr_work(struct work_struct *work)
static void intel_psr_exit(struct drm_i915_private *dev_priv)
{
- struct intel_dp *intel_dp = dev_priv->psr.enabled;
- struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
- enum pipe pipe = to_intel_crtc(crtc)->pipe;
u32 val;
if (!dev_priv->psr.active)
return;
- if (HAS_DDI(dev_priv)) {
- if (dev_priv->psr.psr2_enabled) {
- val = I915_READ(EDP_PSR2_CTL);
- WARN_ON(!(val & EDP_PSR2_ENABLE));
- I915_WRITE(EDP_PSR2_CTL, val & ~EDP_PSR2_ENABLE);
- } else {
- val = I915_READ(EDP_PSR_CTL);
- WARN_ON(!(val & EDP_PSR_ENABLE));
- I915_WRITE(EDP_PSR_CTL, val & ~EDP_PSR_ENABLE);
- }
+ if (dev_priv->psr.psr2_enabled) {
+ val = I915_READ(EDP_PSR2_CTL);
+ WARN_ON(!(val & EDP_PSR2_ENABLE));
+ I915_WRITE(EDP_PSR2_CTL, val & ~EDP_PSR2_ENABLE);
} else {
- val = I915_READ(VLV_PSRCTL(pipe));
-
- /*
- * Here we do the transition drirectly from
- * PSR_state 3 (active - no Remote Frame Buffer (RFB) update) to
- * PSR_state 5 (exit).
- * PSR State 4 (active with single frame update) can be skipped.
- * On PSR_state 5 (exit) Hardware is responsible to transition
- * back to PSR_state 1 (inactive).
- * Now we are at Same state after vlv_psr_enable_source.
- */
- val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
- I915_WRITE(VLV_PSRCTL(pipe), val);
-
- /*
- * Send AUX wake up - Spec says after transitioning to PSR
- * active we have to send AUX wake up by writing 01h in DPCD
- * 600h of sink device.
- * XXX: This might slow down the transition, but without this
- * HW doesn't complete the transition to PSR_state 1 and we
- * never get the screen updated.
- */
- drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
- DP_SET_POWER_D0);
+ val = I915_READ(EDP_PSR_CTL);
+ WARN_ON(!(val & EDP_PSR_ENABLE));
+ I915_WRITE(EDP_PSR_CTL, val & ~EDP_PSR_ENABLE);
}
-
dev_priv->psr.active = false;
}
-/**
- * intel_psr_single_frame_update - Single Frame Update
- * @dev_priv: i915 device
- * @frontbuffer_bits: frontbuffer plane tracking bits
- *
- * Some platforms support a single frame update feature that is used to
- * send and update only one frame on Remote Frame Buffer.
- * So far it is only implemented for Valleyview and Cherryview because
- * hardware requires this to be done before a page flip.
- */
-void intel_psr_single_frame_update(struct drm_i915_private *dev_priv,
- unsigned frontbuffer_bits)
-{
- struct drm_crtc *crtc;
- enum pipe pipe;
- u32 val;
-
- if (!CAN_PSR(dev_priv))
- return;
-
- /*
- * Single frame update is already supported on BDW+ but it requires
- * many W/A and it isn't really needed.
- */
- if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv))
- return;
-
- mutex_lock(&dev_priv->psr.lock);
- if (!dev_priv->psr.enabled) {
- mutex_unlock(&dev_priv->psr.lock);
- return;
- }
-
- crtc = dp_to_dig_port(dev_priv->psr.enabled)->base.base.crtc;
- pipe = to_intel_crtc(crtc)->pipe;
-
- if (frontbuffer_bits & INTEL_FRONTBUFFER_ALL_MASK(pipe)) {
- val = I915_READ(VLV_PSRCTL(pipe));
-
- /*
- * We need to set this bit before writing registers for a flip.
- * This bit will be self-clear when it gets to the PSR active state.
- */
- I915_WRITE(VLV_PSRCTL(pipe), val | VLV_EDP_PSR_SINGLE_FRAME_UPDATE);
- }
- mutex_unlock(&dev_priv->psr.lock);
-}
-
/**
* intel_psr_invalidate - Invalidade PSR
* @dev_priv: i915 device
@@ -1131,8 +939,7 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,
/* By definition flush = invalidate + flush */
if (frontbuffer_bits) {
- if (dev_priv->psr.psr2_enabled ||
- IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
+ if (dev_priv->psr.psr2_enabled) {
intel_psr_exit(dev_priv);
} else {
/*
@@ -1184,9 +991,6 @@ void intel_psr_init(struct drm_i915_private *dev_priv)
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
/* HSW and BDW require workarounds that we don't implement. */
dev_priv->psr.link_standby = false;
- else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
- /* On VLV and CHV only standby mode is supported. */
- dev_priv->psr.link_standby = true;
else
/* For new platforms let's respect VBT back again */
dev_priv->psr.link_standby = dev_priv->vbt.psr.full_link;
@@ -1204,18 +1008,11 @@ void intel_psr_init(struct drm_i915_private *dev_priv)
INIT_DELAYED_WORK(&dev_priv->psr.work, intel_psr_work);
mutex_init(&dev_priv->psr.lock);
- if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
- dev_priv->psr.enable_source = vlv_psr_enable_source;
- dev_priv->psr.disable_source = vlv_psr_disable;
- dev_priv->psr.enable_sink = vlv_psr_enable_sink;
- dev_priv->psr.activate = vlv_psr_activate;
- dev_priv->psr.setup_vsc = vlv_psr_setup_vsc;
- } else {
- dev_priv->psr.has_hw_tracking = true;
- dev_priv->psr.enable_source = hsw_psr_enable_source;
- dev_priv->psr.disable_source = hsw_psr_disable;
- dev_priv->psr.enable_sink = hsw_psr_enable_sink;
- dev_priv->psr.activate = hsw_psr_activate;
- dev_priv->psr.setup_vsc = hsw_psr_setup_vsc;
- }
+ dev_priv->psr.has_hw_tracking = true;
+ dev_priv->psr.enable_source = hsw_psr_enable_source;
+ dev_priv->psr.disable_source = hsw_psr_disable;
+ dev_priv->psr.enable_sink = hsw_psr_enable_sink;
+ dev_priv->psr.activate = hsw_psr_activate;
+ dev_priv->psr.setup_vsc = hsw_psr_setup_vsc;
+
}
1) PSR hardware and hence the driver code deviates a lot from the DDI implementations. Retaining support for VLV and CHV is maintenance burden, we've had to refactor to keep the code clean. 2) There is no PSR capable VLV/CHV platform in CI to ensure code is correct. 3) There are likely no users for PSR on CHV and VLV and the feature has been disabled for a while now. 4) There are still known issues that need to be fixed if we want to enable PSR on these platforms, I am not aware of anyone working on it. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> --- drivers/gpu/drm/i915/i915_debugfs.c | 40 +---- drivers/gpu/drm/i915/i915_pci.c | 2 - drivers/gpu/drm/i915/intel_drv.h | 2 - drivers/gpu/drm/i915/intel_frontbuffer.c | 2 - drivers/gpu/drm/i915/intel_psr.c | 245 +++---------------------------- 5 files changed, 25 insertions(+), 266 deletions(-)