diff mbox series

[CI,v10,4/6] drm/i915/display/icl: Enable master-slaves in trans port sync

Message ID 20191016185240.28299-4-manasi.d.navare@intel.com (mailing list archive)
State New, archived
Headers show
Series [CI,v10,1/6] drm/i915/display/icl: Save Master transcoder in slave's crtc_state for Transcoder Port Sync | expand

Commit Message

Navare, Manasi Oct. 16, 2019, 6:52 p.m. UTC
As per the display enable sequence, we need to follow the enable sequence
for slaves first with DP_TP_CTL set to Idle and configure the transcoder
port sync register to select the corersponding master, then follow the
enable sequence for master leaving DP_TP_CTL to idle.
At this point the transcoder port sync mode is configured and enabled
and the Vblanks of both ports are synchronized so then set DP_TP_CTL
for the slave and master to Normal and do post crtc enable updates.

v9:
Remove update_scanline_offset to rebase on Maarten's patch (Manasi)
v8:
* Rebase on Maarten's patches (Manasi)
v7:
* Use ffs(slaves) to get slave crtc (Ville)
v6:
* Modeset implies active_changed, remove one condition (Maarten)
v5:
* Fix checkpatch warning (Manasi)
v4:
* Reuse skl_commit_modeset_enables() hook (Maarten)
* Obtain slave crtc and states from master (Maarten)
v3:
* Rebase on drm-tip (Manasi)
v2:
* Create a icl_update_crtcs hook (Maarten, Danvet)
* This sequence only for CRTCs in trans port sync mode (Maarten)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c     |   3 +-
 drivers/gpu/drm/i915/display/intel_display.c | 136 ++++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_display.h |   2 +
 3 files changed, 137 insertions(+), 4 deletions(-)

Comments

Ville Syrjälä Oct. 18, 2019, 10:25 a.m. UTC | #1
On Wed, Oct 16, 2019 at 11:52:38AM -0700, Manasi Navare wrote:
> As per the display enable sequence, we need to follow the enable sequence
> for slaves first with DP_TP_CTL set to Idle and configure the transcoder
> port sync register to select the corersponding master, then follow the
> enable sequence for master leaving DP_TP_CTL to idle.
> At this point the transcoder port sync mode is configured and enabled
> and the Vblanks of both ports are synchronized so then set DP_TP_CTL
> for the slave and master to Normal and do post crtc enable updates.
> 
> v9:
> Remove update_scanline_offset to rebase on Maarten's patch (Manasi)
> v8:
> * Rebase on Maarten's patches (Manasi)
> v7:
> * Use ffs(slaves) to get slave crtc (Ville)
> v6:
> * Modeset implies active_changed, remove one condition (Maarten)
> v5:
> * Fix checkpatch warning (Manasi)
> v4:
> * Reuse skl_commit_modeset_enables() hook (Maarten)
> * Obtain slave crtc and states from master (Maarten)
> v3:
> * Rebase on drm-tip (Manasi)
> v2:
> * Create a icl_update_crtcs hook (Maarten, Danvet)
> * This sequence only for CRTCs in trans port sync mode (Maarten)
> 
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Matt Roper <matthew.d.roper@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_ddi.c     |   3 +-
>  drivers/gpu/drm/i915/display/intel_display.c | 136 ++++++++++++++++++-
>  drivers/gpu/drm/i915/display/intel_display.h |   2 +
>  3 files changed, 137 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 80f8e2698be0..23a7348c2fd5 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -3572,7 +3572,8 @@ static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,
>  					      true);
>  	intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
>  	intel_dp_start_link_train(intel_dp);
> -	if (port != PORT_A || INTEL_GEN(dev_priv) >= 9)
> +	if ((port != PORT_A || INTEL_GEN(dev_priv) >= 9) &&
> +	    !is_trans_port_sync_mode(crtc_state))
>  		intel_dp_stop_link_train(intel_dp);
>  
>  	intel_ddi_enable_fec(encoder, crtc_state);
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index e33edd2844ad..d86e0bf02a98 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -14041,6 +14041,18 @@ static void intel_update_crtc(struct intel_crtc *crtc,
>  		intel_crtc_arm_fifo_underrun(crtc, new_crtc_state);
>  }
>  
> +static struct intel_crtc *intel_get_slave_crtc(const struct intel_crtc_state *new_crtc_state)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(new_crtc_state->base.crtc->dev);
> +	enum transcoder slave_transcoder;
> +
> +	WARN_ON(!is_power_of_2(new_crtc_state->sync_mode_slaves_mask));
> +
> +	slave_transcoder = ffs(new_crtc_state->sync_mode_slaves_mask) - 1;
> +	return intel_get_crtc_for_pipe(dev_priv,
> +				       (enum pipe)slave_transcoder);
> +}
> +
>  static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
>  					  struct intel_crtc_state *old_crtc_state,
>  					  struct intel_crtc_state *new_crtc_state,
> @@ -14119,6 +14131,113 @@ static void intel_commit_modeset_enables(struct intel_atomic_state *state)
>  	}
>  }
>  
> +static void intel_crtc_enable_trans_port_sync(struct intel_crtc *crtc,
> +					      struct intel_atomic_state *state,
> +					      struct intel_crtc_state *new_crtc_state)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> +
> +	intel_crtc_update_active_timings(new_crtc_state);
> +	dev_priv->display.crtc_enable(new_crtc_state, state);
> +	intel_crtc_enable_pipe_crc(crtc);
> +}
> +
> +static void intel_set_dp_tp_ctl_normal(struct intel_crtc *crtc,
> +				       struct intel_atomic_state *state)
> +{
> +	struct drm_connector_state *conn_state;
> +	struct drm_connector *conn;
> +	struct intel_dp *intel_dp;
> +	int i;
> +
> +	for_each_new_connector_in_state(&state->base, conn, conn_state, i) {
> +		if (conn_state->crtc == &crtc->base)
> +			break;
> +	}
> +	intel_dp = enc_to_intel_dp(&intel_attached_encoder(conn)->base);
> +	intel_dp_stop_link_train(intel_dp);
> +}
> +
> +static void intel_post_crtc_enable_updates(struct intel_crtc *crtc,
> +					   struct intel_atomic_state *state)
> +{
> +	struct intel_crtc_state *new_crtc_state =
> +		intel_atomic_get_new_crtc_state(state, crtc);
> +	struct intel_crtc_state *old_crtc_state =
> +		intel_atomic_get_old_crtc_state(state, crtc);
> +	struct intel_plane_state *new_plane_state =
> +		intel_atomic_get_new_plane_state(state,
> +						 to_intel_plane(crtc->base.primary));
> +	bool modeset = needs_modeset(new_crtc_state);
> +
> +	if (new_crtc_state->update_pipe && !new_crtc_state->enable_fbc)
> +		intel_fbc_disable(crtc);
> +	else if (new_plane_state)
> +		intel_fbc_enable(crtc, new_crtc_state, new_plane_state);
> +
> +	/* Perform vblank evasion around commit operation */
> +	intel_pipe_update_start(new_crtc_state);
> +	commit_pipe_config(state, old_crtc_state, new_crtc_state);
> +	skl_update_planes_on_crtc(state, crtc);
> +	intel_pipe_update_end(new_crtc_state);
> +
> +	/*
> +	 * We usually enable FIFO underrun interrupts as part of the
> +	 * CRTC enable sequence during modesets.  But when we inherit a
> +	 * valid pipe configuration from the BIOS we need to take care
> +	 * of enabling them on the CRTC's first fastset.
> +	 */
> +	if (new_crtc_state->update_pipe && !modeset &&
> +	    old_crtc_state->base.mode.private_flags & I915_MODE_FLAG_INHERITED)
> +		intel_crtc_arm_fifo_underrun(crtc, new_crtc_state);
> +}
> +
> +static void intel_update_trans_port_sync_crtcs(struct intel_crtc *crtc,
> +					       struct intel_atomic_state *state,
> +					       struct intel_crtc_state *old_crtc_state,
> +					       struct intel_crtc_state *new_crtc_state)
> +{
> +	struct intel_crtc *slave_crtc = intel_get_slave_crtc(new_crtc_state);
> +	struct intel_crtc_state *new_slave_crtc_state =
> +		intel_atomic_get_new_crtc_state(state, slave_crtc);
> +	struct intel_crtc_state *old_slave_crtc_state =
> +		intel_atomic_get_old_crtc_state(state, slave_crtc);
> +
> +	WARN_ON(!slave_crtc || !new_slave_crtc_state ||
> +		!old_slave_crtc_state);
> +
> +	DRM_DEBUG_KMS("Updating Transcoder Port Sync Master CRTC = %d %s and Slave CRTC %d %s\n",
> +		      crtc->base.base.id, crtc->base.name, slave_crtc->base.base.id,
> +		      slave_crtc->base.name);
> +
> +	/* Enable seq for slave with with DP_TP_CTL left Idle until the
> +	 * master is ready
> +	 */
> +	intel_crtc_enable_trans_port_sync(slave_crtc,
> +					  state,
> +					  new_slave_crtc_state);
> +
> +	/* Enable seq for master with with DP_TP_CTL left Idle */
> +	intel_crtc_enable_trans_port_sync(crtc,
> +					  state,
> +					  new_crtc_state);
> +
> +	/* Set Slave's DP_TP_CTL to Normal */
> +	intel_set_dp_tp_ctl_normal(slave_crtc,
> +				   state);
> +
> +	/* Set Master's DP_TP_CTL To Normal */
> +	usleep_range(200, 400);
> +	intel_set_dp_tp_ctl_normal(crtc,
> +				   state);
> +
> +	/* Now do the post crtc enable for all master and slaves */
> +	intel_post_crtc_enable_updates(slave_crtc,
> +				       state);
> +	intel_post_crtc_enable_updates(crtc,
> +				       state);
> +}
> +
>  static void skl_commit_modeset_enables(struct intel_atomic_state *state)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> @@ -14153,6 +14272,7 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
>  		for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
>  			bool vbl_wait = false;
>  			unsigned int cmask = drm_crtc_mask(&crtc->base);
> +			bool modeset = needs_modeset(new_crtc_state);
>  
>  			pipe = crtc->pipe;
>  
> @@ -14175,12 +14295,22 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
>  			 */
>  			if (!skl_ddb_entry_equal(&new_crtc_state->wm.skl.ddb,
>  						 &old_crtc_state->wm.skl.ddb) &&
> -			    !new_crtc_state->base.active_changed &&
> +			    !modeset &&

That part should be a separate patch. As is there is no mention of this
in the commit message.

>  			    state->wm_results.dirty_pipes != updated)
>  				vbl_wait = true;
>  
> -			intel_update_crtc(crtc, state, old_crtc_state,
> -					  new_crtc_state);
> +			if (modeset && is_trans_port_sync_mode(new_crtc_state)) {
> +				if (is_trans_port_sync_master(new_crtc_state))
> +					intel_update_trans_port_sync_crtcs(crtc,
> +									   state,
> +									   old_crtc_state,
> +									   new_crtc_state);
> +				else
> +					continue;

We need to address the ddb overlap bug here. I think we can avoid it
by simply making sure none of the synced pipes has an overlap with
anything else. Since we do this only for modesets that should be fine
and I don't think we can end up in a dead end.

> +			} else {
> +				intel_update_crtc(crtc, state, old_crtc_state,
> +						  new_crtc_state);
> +			}
>  
>  			if (vbl_wait)
>  				intel_wait_for_vblank(dev_priv, pipe);
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> index 0cda275573e2..a49580632a8d 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -27,6 +27,7 @@
>  
>  #include <drm/drm_util.h>
>  #include <drm/i915_drm.h>
> +#include "intel_dp_link_training.h"
>  
>  enum link_m_n_set;
>  struct dpll;
> @@ -54,6 +55,7 @@ struct intel_plane;
>  struct intel_plane_state;
>  struct intel_remapped_info;
>  struct intel_rotation_info;
> +struct intel_crtc_state;
>  
>  enum i915_gpio {
>  	GPIOA,
> -- 
> 2.19.1
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 80f8e2698be0..23a7348c2fd5 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -3572,7 +3572,8 @@  static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,
 					      true);
 	intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
 	intel_dp_start_link_train(intel_dp);
-	if (port != PORT_A || INTEL_GEN(dev_priv) >= 9)
+	if ((port != PORT_A || INTEL_GEN(dev_priv) >= 9) &&
+	    !is_trans_port_sync_mode(crtc_state))
 		intel_dp_stop_link_train(intel_dp);
 
 	intel_ddi_enable_fec(encoder, crtc_state);
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index e33edd2844ad..d86e0bf02a98 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -14041,6 +14041,18 @@  static void intel_update_crtc(struct intel_crtc *crtc,
 		intel_crtc_arm_fifo_underrun(crtc, new_crtc_state);
 }
 
+static struct intel_crtc *intel_get_slave_crtc(const struct intel_crtc_state *new_crtc_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(new_crtc_state->base.crtc->dev);
+	enum transcoder slave_transcoder;
+
+	WARN_ON(!is_power_of_2(new_crtc_state->sync_mode_slaves_mask));
+
+	slave_transcoder = ffs(new_crtc_state->sync_mode_slaves_mask) - 1;
+	return intel_get_crtc_for_pipe(dev_priv,
+				       (enum pipe)slave_transcoder);
+}
+
 static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
 					  struct intel_crtc_state *old_crtc_state,
 					  struct intel_crtc_state *new_crtc_state,
@@ -14119,6 +14131,113 @@  static void intel_commit_modeset_enables(struct intel_atomic_state *state)
 	}
 }
 
+static void intel_crtc_enable_trans_port_sync(struct intel_crtc *crtc,
+					      struct intel_atomic_state *state,
+					      struct intel_crtc_state *new_crtc_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+
+	intel_crtc_update_active_timings(new_crtc_state);
+	dev_priv->display.crtc_enable(new_crtc_state, state);
+	intel_crtc_enable_pipe_crc(crtc);
+}
+
+static void intel_set_dp_tp_ctl_normal(struct intel_crtc *crtc,
+				       struct intel_atomic_state *state)
+{
+	struct drm_connector_state *conn_state;
+	struct drm_connector *conn;
+	struct intel_dp *intel_dp;
+	int i;
+
+	for_each_new_connector_in_state(&state->base, conn, conn_state, i) {
+		if (conn_state->crtc == &crtc->base)
+			break;
+	}
+	intel_dp = enc_to_intel_dp(&intel_attached_encoder(conn)->base);
+	intel_dp_stop_link_train(intel_dp);
+}
+
+static void intel_post_crtc_enable_updates(struct intel_crtc *crtc,
+					   struct intel_atomic_state *state)
+{
+	struct intel_crtc_state *new_crtc_state =
+		intel_atomic_get_new_crtc_state(state, crtc);
+	struct intel_crtc_state *old_crtc_state =
+		intel_atomic_get_old_crtc_state(state, crtc);
+	struct intel_plane_state *new_plane_state =
+		intel_atomic_get_new_plane_state(state,
+						 to_intel_plane(crtc->base.primary));
+	bool modeset = needs_modeset(new_crtc_state);
+
+	if (new_crtc_state->update_pipe && !new_crtc_state->enable_fbc)
+		intel_fbc_disable(crtc);
+	else if (new_plane_state)
+		intel_fbc_enable(crtc, new_crtc_state, new_plane_state);
+
+	/* Perform vblank evasion around commit operation */
+	intel_pipe_update_start(new_crtc_state);
+	commit_pipe_config(state, old_crtc_state, new_crtc_state);
+	skl_update_planes_on_crtc(state, crtc);
+	intel_pipe_update_end(new_crtc_state);
+
+	/*
+	 * We usually enable FIFO underrun interrupts as part of the
+	 * CRTC enable sequence during modesets.  But when we inherit a
+	 * valid pipe configuration from the BIOS we need to take care
+	 * of enabling them on the CRTC's first fastset.
+	 */
+	if (new_crtc_state->update_pipe && !modeset &&
+	    old_crtc_state->base.mode.private_flags & I915_MODE_FLAG_INHERITED)
+		intel_crtc_arm_fifo_underrun(crtc, new_crtc_state);
+}
+
+static void intel_update_trans_port_sync_crtcs(struct intel_crtc *crtc,
+					       struct intel_atomic_state *state,
+					       struct intel_crtc_state *old_crtc_state,
+					       struct intel_crtc_state *new_crtc_state)
+{
+	struct intel_crtc *slave_crtc = intel_get_slave_crtc(new_crtc_state);
+	struct intel_crtc_state *new_slave_crtc_state =
+		intel_atomic_get_new_crtc_state(state, slave_crtc);
+	struct intel_crtc_state *old_slave_crtc_state =
+		intel_atomic_get_old_crtc_state(state, slave_crtc);
+
+	WARN_ON(!slave_crtc || !new_slave_crtc_state ||
+		!old_slave_crtc_state);
+
+	DRM_DEBUG_KMS("Updating Transcoder Port Sync Master CRTC = %d %s and Slave CRTC %d %s\n",
+		      crtc->base.base.id, crtc->base.name, slave_crtc->base.base.id,
+		      slave_crtc->base.name);
+
+	/* Enable seq for slave with with DP_TP_CTL left Idle until the
+	 * master is ready
+	 */
+	intel_crtc_enable_trans_port_sync(slave_crtc,
+					  state,
+					  new_slave_crtc_state);
+
+	/* Enable seq for master with with DP_TP_CTL left Idle */
+	intel_crtc_enable_trans_port_sync(crtc,
+					  state,
+					  new_crtc_state);
+
+	/* Set Slave's DP_TP_CTL to Normal */
+	intel_set_dp_tp_ctl_normal(slave_crtc,
+				   state);
+
+	/* Set Master's DP_TP_CTL To Normal */
+	usleep_range(200, 400);
+	intel_set_dp_tp_ctl_normal(crtc,
+				   state);
+
+	/* Now do the post crtc enable for all master and slaves */
+	intel_post_crtc_enable_updates(slave_crtc,
+				       state);
+	intel_post_crtc_enable_updates(crtc,
+				       state);
+}
+
 static void skl_commit_modeset_enables(struct intel_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
@@ -14153,6 +14272,7 @@  static void skl_commit_modeset_enables(struct intel_atomic_state *state)
 		for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
 			bool vbl_wait = false;
 			unsigned int cmask = drm_crtc_mask(&crtc->base);
+			bool modeset = needs_modeset(new_crtc_state);
 
 			pipe = crtc->pipe;
 
@@ -14175,12 +14295,22 @@  static void skl_commit_modeset_enables(struct intel_atomic_state *state)
 			 */
 			if (!skl_ddb_entry_equal(&new_crtc_state->wm.skl.ddb,
 						 &old_crtc_state->wm.skl.ddb) &&
-			    !new_crtc_state->base.active_changed &&
+			    !modeset &&
 			    state->wm_results.dirty_pipes != updated)
 				vbl_wait = true;
 
-			intel_update_crtc(crtc, state, old_crtc_state,
-					  new_crtc_state);
+			if (modeset && is_trans_port_sync_mode(new_crtc_state)) {
+				if (is_trans_port_sync_master(new_crtc_state))
+					intel_update_trans_port_sync_crtcs(crtc,
+									   state,
+									   old_crtc_state,
+									   new_crtc_state);
+				else
+					continue;
+			} else {
+				intel_update_crtc(crtc, state, old_crtc_state,
+						  new_crtc_state);
+			}
 
 			if (vbl_wait)
 				intel_wait_for_vblank(dev_priv, pipe);
diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
index 0cda275573e2..a49580632a8d 100644
--- a/drivers/gpu/drm/i915/display/intel_display.h
+++ b/drivers/gpu/drm/i915/display/intel_display.h
@@ -27,6 +27,7 @@ 
 
 #include <drm/drm_util.h>
 #include <drm/i915_drm.h>
+#include "intel_dp_link_training.h"
 
 enum link_m_n_set;
 struct dpll;
@@ -54,6 +55,7 @@  struct intel_plane;
 struct intel_plane_state;
 struct intel_remapped_info;
 struct intel_rotation_info;
+struct intel_crtc_state;
 
 enum i915_gpio {
 	GPIOA,