diff mbox series

[v4,2/3] drm/i915/display/tgl: Fix the order of the step to turn transcoder clock off

Message ID 20191205210350.96795-2-jose.souza@intel.com (mailing list archive)
State New, archived
Headers show
Series [v4,1/3] drm/i915/display: Do not check for the ddb allocations of turned off pipes | expand

Commit Message

Souza, Jose Dec. 5, 2019, 9:03 p.m. UTC
For TGL the step to turn off the transcoder clock was moved to after
the complete shutdown of DDI. Only the MST slave transcoders should
disable the clock before that.

v2:
- Adding last_mst_stream to intel_mst_post_disable_dp, make code more
easy to read and is similar to first_mst_stream in
intel_mst_pre_enable_dp()(Ville's idea)
- Calling intel_ddi_disable_pipe_clock() for GEN12+ right
intel_disable_ddi_buf() as stated in BSpec(Ville)

BSpec: 49190
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c    | 10 +++++++++-
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 20 +++++++++++++++-----
 2 files changed, 24 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index ebcc7302706b..3cacb1e279c1 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -3807,11 +3807,19 @@  static void intel_ddi_post_disable_dp(struct intel_encoder *encoder,
 	 */
 	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
 
-	if (!is_mst)
+	if (INTEL_GEN(dev_priv) < 12 && !is_mst)
 		intel_ddi_disable_pipe_clock(old_crtc_state);
 
 	intel_disable_ddi_buf(encoder, old_crtc_state);
 
+	/*
+	 * From TGL spec: "If single stream or multi-stream master transcoder:
+	 * Configure Transcoder Clock select to direct no clock to the
+	 * transcoder"
+	 */
+	if (INTEL_GEN(dev_priv) >= 12)
+		intel_ddi_disable_pipe_clock(old_crtc_state);
+
 	intel_edp_panel_vdd_on(intel_dp);
 	intel_edp_panel_off(intel_dp);
 
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index a1e4f4197a67..926e49f449a6 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -235,8 +235,21 @@  static void intel_mst_post_disable_dp(struct intel_encoder *encoder,
 	struct intel_dp *intel_dp = &intel_dig_port->dp;
 	struct intel_connector *connector =
 		to_intel_connector(old_conn_state->connector);
+	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+	bool last_mst_stream;
 
-	intel_ddi_disable_pipe_clock(old_crtc_state);
+	intel_dp->active_mst_links--;
+	last_mst_stream = intel_dp->active_mst_links == 0;
+
+	/*
+	 * From TGL spec: "If multi-stream slave transcoder: Configure
+	 * Transcoder Clock Select to direct no clock to the transcoder"
+	 *
+	 * From older GENs spec: "Configure Transcoder Clock Select to direct
+	 * no clock to the transcoder"
+	 */
+	if (INTEL_GEN(dev_priv) < 12 || !last_mst_stream)
+		intel_ddi_disable_pipe_clock(old_crtc_state);
 
 	/* this can fail */
 	drm_dp_check_act_status(&intel_dp->mst_mgr);
@@ -252,13 +265,10 @@  static void intel_mst_post_disable_dp(struct intel_encoder *encoder,
 	drm_dp_send_power_updown_phy(&intel_dp->mst_mgr, connector->port,
 				     false);
 
-	intel_dp->active_mst_links--;
-
 	intel_mst->connector = NULL;
-	if (intel_dp->active_mst_links == 0) {
+	if (last_mst_stream)
 		intel_dig_port->base.post_disable(&intel_dig_port->base,
 						  old_crtc_state, NULL);
-	}
 
 	DRM_DEBUG_KMS("active links %d\n", intel_dp->active_mst_links);
 }