Message ID | 20200124172301.16484-1-stanislav.lisovskiy@intel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v3] drm/i915: Fix inconsistance between pfit.enable and scaler freeing | expand |
On Fri, Jan 24, 2020 at 07:23:01PM +0200, Stanislav Lisovskiy wrote: > Despite that during hw readout we seem to have scalers assigned > to pipes, then call atomic_setup_scalers, at the commit stage in > skl_update_scaler there is a check, that if we have fb src and > dest of same size, we stage freeing of that scaler. > > However we don't update pfit.enabled flag then, which makes > the state inconsistent, which in turn triggers a WARN_ON > in skl_pfit_enable, because we have pfit enabled, > but no assigned scaler. And the reason for not having updates pfit.enabled is that the the modeset was forced by a cdclk change and thus the full state recomputation never happened and we're left with the inherited pfit.enabled. > > To me this looks weird that we kind of do the decision > to use or not use the scaler at skl_update_scaler stage > but not in intel_atomic_setup_scalers, moreover > not updating the whole state consistently. > > This fix is to not free the scaler if we have pfit.enabled > flag set, so that the state is now consistent > and the warnings are gone. > > v2: - Put pfit.enable check into crtc specific place > (Ville Syrjälä) > > Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/577 Closes: ... > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> > --- > drivers/gpu/drm/i915/display/intel_display.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c > index 5768cfcf71c4..cd242d91a924 100644 > --- a/drivers/gpu/drm/i915/display/intel_display.c > +++ b/drivers/gpu/drm/i915/display/intel_display.c > @@ -6037,7 +6037,8 @@ int skl_update_scaler_crtc(struct intel_crtc_state *state) > const struct drm_display_mode *adjusted_mode = &state->hw.adjusted_mode; > bool need_scaler = false; > > - if (state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) > + if (state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 || > + state->pch_pfit.enabled) Hmm, no hw.enable check here for the existing case either. Shouldn't matter now that I made the crtc disable clear the entire state as well. Oh, it was handled via that odd force_detach stuff it seems. Whatever. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> > need_scaler = true; > > return skl_update_scaler(state, !state->hw.active, SKL_CRTC_INDEX, > -- > 2.24.1.485.gad05a3d8e5
Quoting Ville Syrjälä (2020-01-24 18:15:30) > On Fri, Jan 24, 2020 at 07:23:01PM +0200, Stanislav Lisovskiy wrote: > > Despite that during hw readout we seem to have scalers assigned > > to pipes, then call atomic_setup_scalers, at the commit stage in > > skl_update_scaler there is a check, that if we have fb src and > > dest of same size, we stage freeing of that scaler. > > > > However we don't update pfit.enabled flag then, which makes > > the state inconsistent, which in turn triggers a WARN_ON > > in skl_pfit_enable, because we have pfit enabled, > > but no assigned scaler. > > And the reason for not having updates pfit.enabled is that the > the modeset was forced by a cdclk change and thus the full state > recomputation never happened and we're left with the inherited > pfit.enabled. > > > > > To me this looks weird that we kind of do the decision > > to use or not use the scaler at skl_update_scaler stage > > but not in intel_atomic_setup_scalers, moreover > > not updating the whole state consistently. > > > > This fix is to not free the scaler if we have pfit.enabled > > flag set, so that the state is now consistent > > and the warnings are gone. > > > > v2: - Put pfit.enable check into crtc specific place > > (Ville Syrjälä) > > > > Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/577 > > Closes: ... Sigh, should have checked first. By special request of Tomi, Tested-by: Tomi Sarvela <tomi.p.sarvela@intel.com> I pushed. Thanks for the patch, -Chris
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c index 5768cfcf71c4..cd242d91a924 100644 --- a/drivers/gpu/drm/i915/display/intel_display.c +++ b/drivers/gpu/drm/i915/display/intel_display.c @@ -6037,7 +6037,8 @@ int skl_update_scaler_crtc(struct intel_crtc_state *state) const struct drm_display_mode *adjusted_mode = &state->hw.adjusted_mode; bool need_scaler = false; - if (state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) + if (state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 || + state->pch_pfit.enabled) need_scaler = true; return skl_update_scaler(state, !state->hw.active, SKL_CRTC_INDEX,
Despite that during hw readout we seem to have scalers assigned to pipes, then call atomic_setup_scalers, at the commit stage in skl_update_scaler there is a check, that if we have fb src and dest of same size, we stage freeing of that scaler. However we don't update pfit.enabled flag then, which makes the state inconsistent, which in turn triggers a WARN_ON in skl_pfit_enable, because we have pfit enabled, but no assigned scaler. To me this looks weird that we kind of do the decision to use or not use the scaler at skl_update_scaler stage but not in intel_atomic_setup_scalers, moreover not updating the whole state consistently. This fix is to not free the scaler if we have pfit.enabled flag set, so that the state is now consistent and the warnings are gone. v2: - Put pfit.enable check into crtc specific place (Ville Syrjälä) Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/577 Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> --- drivers/gpu/drm/i915/display/intel_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)