@@ -24,6 +24,7 @@
* Eric Anholt <eric@anholt.net>
*/
+#include <acpi/video.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/intel-iommu.h>
@@ -43,7 +44,9 @@
#include <drm/drm_probe_helper.h>
#include <drm/drm_rect.h>
+#include "display/intel_audio.h"
#include "display/intel_crt.h"
+#include "display/intel_display_debugfs.h"
#include "display/intel_ddi.h"
#include "display/intel_dp.h"
#include "display/intel_dp_mst.h"
@@ -19709,6 +19712,56 @@ void intel_modeset_driver_remove_nogem(struct drm_i915_private *i915)
intel_bios_driver_remove(i915);
}
+void intel_display_driver_register(struct drm_i915_private *i915)
+{
+ if (!HAS_DISPLAY(i915))
+ return;
+
+ intel_display_debugfs_register(i915);
+
+ /* Must be done after probing outputs */
+ intel_opregion_register(i915);
+ acpi_video_register();
+
+ intel_audio_init(i915);
+
+ /*
+ * Some ports require correctly set-up hpd registers for
+ * detection to work properly (leading to ghost connected
+ * connector status), e.g. VGA on gm45. Hence we can only set
+ * up the initial fbdev config after hpd irqs are fully
+ * enabled. We do it last so that the async config cannot run
+ * before the connectors are registered.
+ */
+ intel_fbdev_initial_config_async(&i915->drm);
+
+ /*
+ * We need to coordinate the hotplugs with the asynchronous
+ * fbdev configuration, for which we use the
+ * fbdev->async_cookie.
+ */
+ drm_kms_helper_poll_init(&i915->drm);
+}
+
+void intel_display_driver_unregister(struct drm_i915_private *i915)
+{
+ if (!HAS_DISPLAY(i915))
+ return;
+
+ intel_fbdev_unregister(i915);
+ intel_audio_deinit(i915);
+
+ /*
+ * After flushing the fbdev (incl. a late async config which
+ * will have delayed queuing of a hotplug event), then flush
+ * the hotplug events.
+ */
+ drm_kms_helper_poll_fini(&i915->drm);
+
+ acpi_video_unregister();
+ intel_opregion_unregister(i915);
+}
+
#if IS_ENABLED(CONFIG_DRM_I915_CAPTURE_ERROR)
struct intel_display_error_state {
@@ -645,6 +645,9 @@ bool
intel_format_info_is_yuv_semiplanar(const struct drm_format_info *info,
uint64_t modifier);
+void intel_display_driver_register(struct drm_i915_private *i915);
+void intel_display_driver_unregister(struct drm_i915_private *i915);
+
/* modesetting */
void intel_modeset_init_hw(struct drm_i915_private *i915);
int intel_modeset_init_noirq(struct drm_i915_private *i915);
@@ -38,7 +38,6 @@
#include <linux/slab.h>
#include <linux/vga_switcheroo.h>
#include <linux/vt.h>
-#include <acpi/video.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_ioctl.h>
@@ -51,7 +50,6 @@
#include "display/intel_bw.h"
#include "display/intel_cdclk.h"
#include "display/intel_csr.h"
-#include "display/intel_display_debugfs.h"
#include "display/intel_display_types.h"
#include "display/intel_dp.h"
#include "display/intel_fbdev.h"
@@ -683,32 +681,7 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
intel_gt_driver_register(&dev_priv->gt);
- if (HAS_DISPLAY(dev_priv)) {
- intel_display_debugfs_register(dev_priv);
-
- /* Must be done after probing outputs */
- intel_opregion_register(dev_priv);
- acpi_video_register();
-
- intel_audio_init(dev_priv);
-
- /*
- * Some ports require correctly set-up hpd registers for
- * detection to work properly (leading to ghost connected
- * connector status), e.g. VGA on gm45. Hence we can only set
- * up the initial fbdev config after hpd irqs are fully
- * enabled. We do it last so that the async config cannot run
- * before the connectors are registered.
- */
- intel_fbdev_initial_config_async(dev);
-
- /*
- * We need to coordinate the hotplugs with the asynchronous
- * fbdev configuration, for which we use the
- * fbdev->async_cookie.
- */
- drm_kms_helper_poll_init(dev);
- }
+ intel_display_driver_register(dev_priv);
intel_power_domains_enable(dev_priv);
intel_runtime_pm_enable(&dev_priv->runtime_pm);
@@ -732,20 +705,7 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv)
intel_runtime_pm_disable(&dev_priv->runtime_pm);
intel_power_domains_disable(dev_priv);
- if (HAS_DISPLAY(dev_priv)) {
- intel_fbdev_unregister(dev_priv);
- intel_audio_deinit(dev_priv);
-
- /*
- * After flushing the fbdev (incl. a late async config which
- * will have delayed queuing of a hotplug event), then flush
- * the hotplug events.
- */
- drm_kms_helper_poll_fini(&dev_priv->drm);
-
- acpi_video_unregister();
- intel_opregion_unregister(dev_priv);
- }
+ intel_display_driver_unregister(dev_priv);
intel_gt_driver_unregister(&dev_priv->gt);
Now that all display-related functions are grouped in i915_driver_register(), move them to display/ so we reduce the amount of display calls from the rest of the driver. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> --- drivers/gpu/drm/i915/display/intel_display.c | 53 ++++++++++++++++++++ drivers/gpu/drm/i915/display/intel_display.h | 3 ++ drivers/gpu/drm/i915/i915_drv.c | 44 +--------------- 3 files changed, 58 insertions(+), 42 deletions(-)