diff mbox series

[v2] drm/i915/display: Prevent double YUV range correction on HDR planes

Message ID 20201215224219.3896256-1-andrescj@google.com (mailing list archive)
State New, archived
Headers show
Series [v2] drm/i915/display: Prevent double YUV range correction on HDR planes | expand

Commit Message

Andres Calderon Jaramillo Dec. 15, 2020, 10:42 p.m. UTC 
From: Andres Calderon Jaramillo <andrescj@chromium.org>

Prevent the ICL HDR plane pipeline from performing YUV color range
correction twice when the input is in limited range. This is done by
removing the limited-range code from icl_program_input_csc().

Before this patch the following could happen: user space gives us a YUV
buffer in limited range; per the pipeline in [1], the plane would first
go through a "YUV Range correct" stage that expands the range; the plane
would then go through the "Input CSC" stage which would also expand the
range because icl_program_input_csc() would use a matrix and an offset
that assume limited-range input; this would ultimately cause dark and
light colors to appear darker and lighter than they should respectively.

This is an issue because if a buffer switches between being scanned out
and being composited with the GPU, the user will see a color difference.
If this switching happens quickly and frequently, the user will perceive
this as a flickering.

[1] https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-icllp-vol12-displayengine_0.pdf#page=281

Signed-off-by: Andres Calderon Jaramillo <andrescj@chromium.org>
---
Changelog since v1:
- Don't skip the YUV range correction stage. Instead, use that stage and
  modify icl_program_input_csc() to always assume full-range input.

 drivers/gpu/drm/i915/display/intel_display.c |  2 +
 drivers/gpu/drm/i915/display/intel_sprite.c  | 65 +++-----------------
 2 files changed, 12 insertions(+), 55 deletions(-)

Comments

Ville Syrjälä Jan. 27, 2021, 11:39 p.m. UTC | #1 
On Tue, Dec 15, 2020 at 10:42:19PM +0000, Andres Calderon Jaramillo wrote:
> From: Andres Calderon Jaramillo <andrescj@chromium.org>
> 
> Prevent the ICL HDR plane pipeline from performing YUV color range
> correction twice when the input is in limited range. This is done by
> removing the limited-range code from icl_program_input_csc().
> 
> Before this patch the following could happen: user space gives us a YUV
> buffer in limited range; per the pipeline in [1], the plane would first
> go through a "YUV Range correct" stage that expands the range; the plane
> would then go through the "Input CSC" stage which would also expand the
> range because icl_program_input_csc() would use a matrix and an offset
> that assume limited-range input; this would ultimately cause dark and
> light colors to appear darker and lighter than they should respectively.
> 
> This is an issue because if a buffer switches between being scanned out
> and being composited with the GPU, the user will see a color difference.
> If this switching happens quickly and frequently, the user will perceive
> this as a flickering.
> 
> [1] https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-icllp-vol12-displayengine_0.pdf#page=281
> 
> Signed-off-by: Andres Calderon Jaramillo <andrescj@chromium.org>

Thanks. Slapped a cc:stable on this and pushed.

> ---
> Changelog since v1:
> - Don't skip the YUV range correction stage. Instead, use that stage and
>   modify icl_program_input_csc() to always assume full-range input.
> 
>  drivers/gpu/drm/i915/display/intel_display.c |  2 +
>  drivers/gpu/drm/i915/display/intel_sprite.c  | 65 +++-----------------
>  2 files changed, 12 insertions(+), 55 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 761be8deaa9b..8fb9b4f8c1df 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -4811,6 +4811,8 @@ u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
>  			plane_color_ctl |= PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
>  	} else if (fb->format->is_yuv) {
>  		plane_color_ctl |= PLANE_COLOR_INPUT_CSC_ENABLE;
> +		if (plane_state->hw.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
> +			plane_color_ctl |= PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
>  	}
>  
>  	return plane_color_ctl;
> diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c b/drivers/gpu/drm/i915/display/intel_sprite.c
> index b7e208816074..121e1b5120fd 100644
> --- a/drivers/gpu/drm/i915/display/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/display/intel_sprite.c
> @@ -633,13 +633,19 @@ skl_program_scaler(struct intel_plane *plane,
>  
>  /* Preoffset values for YUV to RGB Conversion */
>  #define PREOFF_YUV_TO_RGB_HI		0x1800
> -#define PREOFF_YUV_TO_RGB_ME		0x1F00
> +#define PREOFF_YUV_TO_RGB_ME		0x0000
>  #define PREOFF_YUV_TO_RGB_LO		0x1800
>  
>  #define  ROFF(x)          (((x) & 0xffff) << 16)
>  #define  GOFF(x)          (((x) & 0xffff) << 0)
>  #define  BOFF(x)          (((x) & 0xffff) << 16)
>  
> +/*
> + * Programs the input color space conversion stage for ICL HDR planes.
> + * Note that it is assumed that this stage always happens after YUV
> + * range correction. Thus, the input to this stage is assumed to be
> + * in full-range YCbCr.
> + */
>  static void
>  icl_program_input_csc(struct intel_plane *plane,
>  		      const struct intel_crtc_state *crtc_state,
> @@ -687,52 +693,7 @@ icl_program_input_csc(struct intel_plane *plane,
>  			0x0, 0x7800, 0x7F10,
>  		},
>  	};
> -
> -	/* Matrix for Limited Range to Full Range Conversion */
> -	static const u16 input_csc_matrix_lr[][9] = {
> -		/*
> -		 * BT.601 Limted range YCbCr -> full range RGB
> -		 * The matrix required is :
> -		 * [1.164384, 0.000, 1.596027,
> -		 *  1.164384, -0.39175, -0.812813,
> -		 *  1.164384, 2.017232, 0.0000]
> -		 */
> -		[DRM_COLOR_YCBCR_BT601] = {
> -			0x7CC8, 0x7950, 0x0,
> -			0x8D00, 0x7950, 0x9C88,
> -			0x0, 0x7950, 0x6810,
> -		},
> -		/*
> -		 * BT.709 Limited range YCbCr -> full range RGB
> -		 * The matrix required is :
> -		 * [1.164384, 0.000, 1.792741,
> -		 *  1.164384, -0.213249, -0.532909,
> -		 *  1.164384, 2.112402, 0.0000]
> -		 */
> -		[DRM_COLOR_YCBCR_BT709] = {
> -			0x7E58, 0x7950, 0x0,
> -			0x8888, 0x7950, 0xADA8,
> -			0x0, 0x7950,  0x6870,
> -		},
> -		/*
> -		 * BT.2020 Limited range YCbCr -> full range RGB
> -		 * The matrix required is :
> -		 * [1.164, 0.000, 1.678,
> -		 *  1.164, -0.1873, -0.6504,
> -		 *  1.164, 2.1417, 0.0000]
> -		 */
> -		[DRM_COLOR_YCBCR_BT2020] = {
> -			0x7D70, 0x7950, 0x0,
> -			0x8A68, 0x7950, 0xAC00,
> -			0x0, 0x7950, 0x6890,
> -		},
> -	};
> -	const u16 *csc;
> -
> -	if (plane_state->hw.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
> -		csc = input_csc_matrix[plane_state->hw.color_encoding];
> -	else
> -		csc = input_csc_matrix_lr[plane_state->hw.color_encoding];
> +	const u16 *csc = input_csc_matrix[plane_state->hw.color_encoding];
>  
>  	intel_de_write_fw(dev_priv, PLANE_INPUT_CSC_COEFF(pipe, plane_id, 0),
>  			  ROFF(csc[0]) | GOFF(csc[1]));
> @@ -749,14 +710,8 @@ icl_program_input_csc(struct intel_plane *plane,
>  
>  	intel_de_write_fw(dev_priv, PLANE_INPUT_CSC_PREOFF(pipe, plane_id, 0),
>  			  PREOFF_YUV_TO_RGB_HI);
> -	if (plane_state->hw.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
> -		intel_de_write_fw(dev_priv,
> -				  PLANE_INPUT_CSC_PREOFF(pipe, plane_id, 1),
> -				  0);
> -	else
> -		intel_de_write_fw(dev_priv,
> -				  PLANE_INPUT_CSC_PREOFF(pipe, plane_id, 1),
> -				  PREOFF_YUV_TO_RGB_ME);
> +	intel_de_write_fw(dev_priv, PLANE_INPUT_CSC_PREOFF(pipe, plane_id, 1),
> +			  PREOFF_YUV_TO_RGB_ME);
>  	intel_de_write_fw(dev_priv, PLANE_INPUT_CSC_PREOFF(pipe, plane_id, 2),
>  			  PREOFF_YUV_TO_RGB_LO);
>  	intel_de_write_fw(dev_priv,
> -- 
> 2.29.2.684.gfbc64c5ab5-goog
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 761be8deaa9b..8fb9b4f8c1df 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -4811,6 +4811,8 @@  u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
 			plane_color_ctl |= PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
 	} else if (fb->format->is_yuv) {
 		plane_color_ctl |= PLANE_COLOR_INPUT_CSC_ENABLE;
+		if (plane_state->hw.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
+			plane_color_ctl |= PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
 	}
 
 	return plane_color_ctl;
diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c b/drivers/gpu/drm/i915/display/intel_sprite.c
index b7e208816074..121e1b5120fd 100644
--- a/drivers/gpu/drm/i915/display/intel_sprite.c
+++ b/drivers/gpu/drm/i915/display/intel_sprite.c
@@ -633,13 +633,19 @@  skl_program_scaler(struct intel_plane *plane,
 
 /* Preoffset values for YUV to RGB Conversion */
 #define PREOFF_YUV_TO_RGB_HI		0x1800
-#define PREOFF_YUV_TO_RGB_ME		0x1F00
+#define PREOFF_YUV_TO_RGB_ME		0x0000
 #define PREOFF_YUV_TO_RGB_LO		0x1800
 
 #define  ROFF(x)          (((x) & 0xffff) << 16)
 #define  GOFF(x)          (((x) & 0xffff) << 0)
 #define  BOFF(x)          (((x) & 0xffff) << 16)
 
+/*
+ * Programs the input color space conversion stage for ICL HDR planes.
+ * Note that it is assumed that this stage always happens after YUV
+ * range correction. Thus, the input to this stage is assumed to be
+ * in full-range YCbCr.
+ */
 static void
 icl_program_input_csc(struct intel_plane *plane,
 		      const struct intel_crtc_state *crtc_state,
@@ -687,52 +693,7 @@  icl_program_input_csc(struct intel_plane *plane,
 			0x0, 0x7800, 0x7F10,
 		},
 	};
-
-	/* Matrix for Limited Range to Full Range Conversion */
-	static const u16 input_csc_matrix_lr[][9] = {
-		/*
-		 * BT.601 Limted range YCbCr -> full range RGB
-		 * The matrix required is :
-		 * [1.164384, 0.000, 1.596027,
-		 *  1.164384, -0.39175, -0.812813,
-		 *  1.164384, 2.017232, 0.0000]
-		 */
-		[DRM_COLOR_YCBCR_BT601] = {
-			0x7CC8, 0x7950, 0x0,
-			0x8D00, 0x7950, 0x9C88,
-			0x0, 0x7950, 0x6810,
-		},
-		/*
-		 * BT.709 Limited range YCbCr -> full range RGB
-		 * The matrix required is :
-		 * [1.164384, 0.000, 1.792741,
-		 *  1.164384, -0.213249, -0.532909,
-		 *  1.164384, 2.112402, 0.0000]
-		 */
-		[DRM_COLOR_YCBCR_BT709] = {
-			0x7E58, 0x7950, 0x0,
-			0x8888, 0x7950, 0xADA8,
-			0x0, 0x7950,  0x6870,
-		},
-		/*
-		 * BT.2020 Limited range YCbCr -> full range RGB
-		 * The matrix required is :
-		 * [1.164, 0.000, 1.678,
-		 *  1.164, -0.1873, -0.6504,
-		 *  1.164, 2.1417, 0.0000]
-		 */
-		[DRM_COLOR_YCBCR_BT2020] = {
-			0x7D70, 0x7950, 0x0,
-			0x8A68, 0x7950, 0xAC00,
-			0x0, 0x7950, 0x6890,
-		},
-	};
-	const u16 *csc;
-
-	if (plane_state->hw.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
-		csc = input_csc_matrix[plane_state->hw.color_encoding];
-	else
-		csc = input_csc_matrix_lr[plane_state->hw.color_encoding];
+	const u16 *csc = input_csc_matrix[plane_state->hw.color_encoding];
 
 	intel_de_write_fw(dev_priv, PLANE_INPUT_CSC_COEFF(pipe, plane_id, 0),
 			  ROFF(csc[0]) | GOFF(csc[1]));
@@ -749,14 +710,8 @@  icl_program_input_csc(struct intel_plane *plane,
 
 	intel_de_write_fw(dev_priv, PLANE_INPUT_CSC_PREOFF(pipe, plane_id, 0),
 			  PREOFF_YUV_TO_RGB_HI);
-	if (plane_state->hw.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
-		intel_de_write_fw(dev_priv,
-				  PLANE_INPUT_CSC_PREOFF(pipe, plane_id, 1),
-				  0);
-	else
-		intel_de_write_fw(dev_priv,
-				  PLANE_INPUT_CSC_PREOFF(pipe, plane_id, 1),
-				  PREOFF_YUV_TO_RGB_ME);
+	intel_de_write_fw(dev_priv, PLANE_INPUT_CSC_PREOFF(pipe, plane_id, 1),
+			  PREOFF_YUV_TO_RGB_ME);
 	intel_de_write_fw(dev_priv, PLANE_INPUT_CSC_PREOFF(pipe, plane_id, 2),
 			  PREOFF_YUV_TO_RGB_LO);
 	intel_de_write_fw(dev_priv,