@@ -374,8 +374,6 @@ static int intel_psr_status(struct seq_file *m, struct intel_dp *intel_dp)
seq_printf(m, "Source PSR ctl: %s [0x%08x]\n",
enableddisabled(enabled), val);
psr_source_status(intel_dp, m);
- seq_printf(m, "Busy frontbuffer bits: 0x%08x\n",
- psr->busy_frontbuffer_bits);
/*
* SKL+ Perf counter is reset to 0 everytime DC state is entered
@@ -1512,7 +1512,6 @@ struct intel_psr {
enum transcoder transcoder;
bool active;
struct work_struct work;
- unsigned int busy_frontbuffer_bits;
bool sink_psr2_support;
bool link_standby;
bool colorimetry_support;
@@ -1523,7 +1522,6 @@ struct intel_psr {
ktime_t last_entry_attempt;
ktime_t last_exit;
bool sink_not_reliable;
- bool irq_aux_error;
u16 su_w_granularity;
u16 su_y_granularity;
u32 dc3co_exitline;
@@ -96,7 +96,6 @@ static void frontbuffer_flush(struct drm_i915_private *i915,
might_sleep();
intel_edp_drrs_flush(i915, frontbuffer_bits);
- intel_psr_flush(i915, frontbuffer_bits, origin);
intel_fbc_flush(i915, frontbuffer_bits, origin);
}
@@ -186,7 +185,6 @@ void __intel_fb_invalidate(struct intel_frontbuffer *front,
return;
might_sleep();
- intel_psr_invalidate(i915, frontbuffer_bits, origin);
intel_edp_drrs_invalidate(i915, frontbuffer_bits);
intel_fbc_invalidate(i915, frontbuffer_bits, origin);
}
@@ -224,15 +224,12 @@ void intel_psr_irq_handler(struct intel_dp *intel_dp, u32 psr_iir)
drm_warn(&dev_priv->drm, "[transcoder %s] PSR aux error\n",
transcoder_name(cpu_transcoder));
- intel_dp->psr.irq_aux_error = true;
-
/*
* If this interruption is not masked it will keep
* interrupting so fast that it prevents the scheduled
* work to run.
* Also after a PSR error, we don't want to arm PSR
* again so we don't care about unmask the interruption
- * or unset irq_aux_error.
*/
val = intel_de_read(dev_priv, imr_reg);
val |= EDP_PSR_ERROR(trans_shift);
@@ -614,14 +611,6 @@ static void psr2_program_idle_frames(struct intel_dp *intel_dp,
intel_de_write(dev_priv, EDP_PSR2_CTL(intel_dp->psr.transcoder), val);
}
-static void tgl_psr2_enable_dc3co(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-
- psr2_program_idle_frames(intel_dp, 0);
- intel_display_power_set_target_dc_state(dev_priv, DC_STATE_EN_DC3CO);
-}
-
static void tgl_psr2_disable_dc3co(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
@@ -1177,7 +1166,6 @@ static void intel_psr_enable_locked(struct intel_dp *intel_dp,
drm_WARN_ON(&dev_priv->drm, intel_dp->psr.enabled);
intel_dp->psr.psr2_enabled = crtc_state->has_psr2;
- intel_dp->psr.busy_frontbuffer_bits = 0;
intel_dp->psr.pipe = to_intel_crtc(crtc_state->uapi.crtc)->pipe;
intel_dp->psr.transcoder = crtc_state->cpu_transcoder;
/* DC5/DC6 requires at least 6 idle frames */
@@ -1784,36 +1772,6 @@ void intel_psr_wait_for_idle(const struct intel_crtc_state *new_crtc_state)
}
}
-static bool __psr_wait_for_idle_locked(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- i915_reg_t reg;
- u32 mask;
- int err;
-
- if (!intel_dp->psr.enabled)
- return false;
-
- if (intel_dp->psr.psr2_enabled) {
- reg = EDP_PSR2_STATUS(intel_dp->psr.transcoder);
- mask = EDP_PSR2_STATUS_STATE_MASK;
- } else {
- reg = EDP_PSR_STATUS(intel_dp->psr.transcoder);
- mask = EDP_PSR_STATUS_STATE_MASK;
- }
-
- mutex_unlock(&intel_dp->psr.lock);
-
- err = intel_de_wait_for_clear(dev_priv, reg, mask, 50);
- if (err)
- drm_err(&dev_priv->drm,
- "Timed out waiting for PSR Idle for re-enable\n");
-
- /* After the unlocked wait, verify that PSR is still wanted! */
- mutex_lock(&intel_dp->psr.lock);
- return err == 0 && intel_dp->psr.enabled;
-}
-
static int intel_psr_fastset_force(struct drm_i915_private *dev_priv)
{
struct drm_connector_list_iter conn_iter;
@@ -1912,16 +1870,6 @@ int intel_psr_debug_set(struct intel_dp *intel_dp, u64 val)
return ret;
}
-static void intel_psr_handle_irq(struct intel_dp *intel_dp)
-{
- struct intel_psr *psr = &intel_dp->psr;
-
- intel_psr_disable_locked(intel_dp);
- psr->sink_not_reliable = true;
- /* let's make sure that sink is awaken */
- drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
-}
-
static void intel_psr_work(struct work_struct *work)
{
struct intel_dp *intel_dp =
@@ -1929,75 +1877,30 @@ static void intel_psr_work(struct work_struct *work)
mutex_lock(&intel_dp->psr.lock);
- if (!intel_dp->psr.enabled)
- goto unlock;
-
- if (READ_ONCE(intel_dp->psr.irq_aux_error))
- intel_psr_handle_irq(intel_dp);
-
- /*
- * We have to make sure PSR is ready for re-enable
- * otherwise it keeps disabled until next full enable/disable cycle.
- * PSR might take some time to get fully disabled
- * and be ready for re-enable.
- */
- if (!__psr_wait_for_idle_locked(intel_dp))
- goto unlock;
-
- /*
- * The delayed work can race with an invalidate hence we need to
- * recheck. Since psr_flush first clears this and then reschedules we
- * won't ever miss a flush when bailing out here.
- */
- if (intel_dp->psr.busy_frontbuffer_bits || intel_dp->psr.active)
- goto unlock;
+ /* Handling PSR error interruption */
+ intel_psr_disable_locked(intel_dp);
+ intel_dp->psr.sink_not_reliable = true;
+ /* let's make sure that sink is awaken */
+ drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
- intel_psr_activate(intel_dp);
-unlock:
mutex_unlock(&intel_dp->psr.lock);
}
-/**
- * intel_psr_invalidate - Invalidade PSR
- * @dev_priv: i915 device
- * @frontbuffer_bits: frontbuffer plane tracking bits
- * @origin: which operation caused the invalidate
- *
- * Since the hardware frontbuffer tracking has gaps we need to integrate
- * with the software frontbuffer tracking. This function gets called every
- * time frontbuffer rendering starts and a buffer gets dirtied. PSR must be
- * disabled if the frontbuffer mask contains a buffer relevant to PSR.
- *
- * Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits."
+/*
+ * TODO: Functions below lost their callers to a refactor but as DC3CO is
+ * already disabled by default because it requires fixes, will leave this task
+ * to whoever will fix DC3CO.
*/
-void intel_psr_invalidate(struct drm_i915_private *dev_priv,
- unsigned frontbuffer_bits, enum fb_op_origin origin)
-{
- struct intel_encoder *encoder;
-
- if (origin == ORIGIN_FLIP)
- return;
-
- for_each_intel_encoder_with_psr(&dev_priv->drm, encoder) {
- unsigned int pipe_frontbuffer_bits = frontbuffer_bits;
- struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-
- mutex_lock(&intel_dp->psr.lock);
- if (!intel_dp->psr.enabled) {
- mutex_unlock(&intel_dp->psr.lock);
- continue;
- }
-
- pipe_frontbuffer_bits &=
- INTEL_FRONTBUFFER_ALL_MASK(intel_dp->psr.pipe);
- intel_dp->psr.busy_frontbuffer_bits |= pipe_frontbuffer_bits;
+#if 0
- if (pipe_frontbuffer_bits)
- intel_psr_exit(intel_dp);
+static void tgl_psr2_enable_dc3co(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- mutex_unlock(&intel_dp->psr.lock);
- }
+ psr2_program_idle_frames(intel_dp, 0);
+ intel_display_power_set_target_dc_state(dev_priv, DC_STATE_EN_DC3CO);
}
+
/*
* When we will be completely rely on PSR2 S/W tracking in future,
* intel_psr_flush() will invalidate and flush the PSR for ORIGIN_FLIP
@@ -2032,62 +1935,7 @@ tgl_dc3co_flush(struct intel_dp *intel_dp, unsigned int frontbuffer_bits,
mutex_unlock(&intel_dp->psr.lock);
}
-/**
- * intel_psr_flush - Flush PSR
- * @dev_priv: i915 device
- * @frontbuffer_bits: frontbuffer plane tracking bits
- * @origin: which operation caused the flush
- *
- * Since the hardware frontbuffer tracking has gaps we need to integrate
- * with the software frontbuffer tracking. This function gets called every
- * time frontbuffer rendering has completed and flushed out to memory. PSR
- * can be enabled again if no other frontbuffer relevant to PSR is dirty.
- *
- * Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits.
- */
-void intel_psr_flush(struct drm_i915_private *dev_priv,
- unsigned frontbuffer_bits, enum fb_op_origin origin)
-{
- struct intel_encoder *encoder;
-
- for_each_intel_encoder_with_psr(&dev_priv->drm, encoder) {
- unsigned int pipe_frontbuffer_bits = frontbuffer_bits;
- struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-
- if (origin == ORIGIN_FLIP) {
- tgl_dc3co_flush(intel_dp, frontbuffer_bits, origin);
- continue;
- }
-
- mutex_lock(&intel_dp->psr.lock);
- if (!intel_dp->psr.enabled) {
- mutex_unlock(&intel_dp->psr.lock);
- continue;
- }
-
- pipe_frontbuffer_bits &=
- INTEL_FRONTBUFFER_ALL_MASK(intel_dp->psr.pipe);
- intel_dp->psr.busy_frontbuffer_bits &= ~pipe_frontbuffer_bits;
-
- /*
- * If the PSR is paused by an explicit intel_psr_paused() call,
- * we have to ensure that the PSR is not activated until
- * intel_psr_resume() is called.
- */
- if (intel_dp->psr.paused) {
- mutex_unlock(&intel_dp->psr.lock);
- continue;
- }
-
- /* By definition flush = invalidate + flush */
- if (pipe_frontbuffer_bits)
- psr_force_hw_tracking_exit(intel_dp);
-
- if (!intel_dp->psr.active && !intel_dp->psr.busy_frontbuffer_bits)
- schedule_work(&intel_dp->psr.work);
- mutex_unlock(&intel_dp->psr.lock);
- }
-}
+#endif
/**
* intel_psr_init - Init basic PSR work and mutex.
@@ -6,7 +6,7 @@
#ifndef __INTEL_PSR_H__
#define __INTEL_PSR_H__
-#include "intel_frontbuffer.h"
+#include <linux/types.h>
struct drm_connector;
struct drm_connector_state;
@@ -29,12 +29,6 @@ void intel_psr_update(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state);
int intel_psr_debug_set(struct intel_dp *intel_dp, u64 value);
-void intel_psr_invalidate(struct drm_i915_private *dev_priv,
- unsigned frontbuffer_bits,
- enum fb_op_origin origin);
-void intel_psr_flush(struct drm_i915_private *dev_priv,
- unsigned frontbuffer_bits,
- enum fb_op_origin origin);
void intel_psr_init(struct intel_dp *intel_dp);
void intel_psr_compute_config(struct intel_dp *intel_dp,
struct intel_crtc_state *crtc_state);
After commit "drm/i915/display/skl+: Drop frontbuffer rendering support" frontbuffer rendering is not supported for display 9 and newer and as PSR is only supported by default in display 9 and newer we can now drop all frontbuffer rendering support for PSR code. Some DC3CO code was commented with a macro, because the function caller is being dropped. As DC3CO is already disabled by default because it requires changes in its sequences Two DC3CO functions lost their callers while dropping frontbuffer rendering but as DC3CO is already disabled by default because it requires fixes, will leave this task to whoever will fix DC3CO. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> --- .../drm/i915/display/intel_display_debugfs.c | 2 - .../drm/i915/display/intel_display_types.h | 2 - .../gpu/drm/i915/display/intel_frontbuffer.c | 2 - drivers/gpu/drm/i915/display/intel_psr.c | 186 ++---------------- drivers/gpu/drm/i915/display/intel_psr.h | 8 +- 5 files changed, 18 insertions(+), 182 deletions(-)