@@ -153,8 +153,10 @@
#define MI_FLUSH_DW_PROTECTED_MEM_EN (1 << 22)
#define MI_FLUSH_DW_STORE_INDEX (1<<21)
#define MI_INVALIDATE_TLB (1<<18)
+#define MI_FLUSH_DW_CCS (1<<16)
#define MI_FLUSH_DW_OP_STOREDW (1<<14)
#define MI_FLUSH_DW_OP_MASK (3<<14)
+#define MI_FLUSH_DW_LLC (1<<9)
#define MI_FLUSH_DW_NOTIFY (1<<8)
#define MI_INVALIDATE_BSD (1<<7)
#define MI_FLUSH_DW_USE_GTT (1<<2)
@@ -203,6 +205,19 @@
#define GFX_OP_DRAWRECT_INFO ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3))
#define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2)
+#define XY_CTRL_SURF_INSTR_SIZE 5
+#define MI_FLUSH_DW_SIZE 3
+#define XY_CTRL_SURF_COPY_BLT ((2 << 29) | (0x48 << 22) | 3)
+#define SRC_ACCESS_TYPE_SHIFT 21
+#define DST_ACCESS_TYPE_SHIFT 20
+#define CCS_SIZE_MASK GENMASK(17, 8)
+#define XY_CTRL_SURF_MOCS_MASK GENMASK(31, 25)
+#define NUM_CCS_BYTES_PER_BLOCK 256
+#define NUM_BYTES_PER_CCS_BYTE 256
+#define NUM_CCS_BLKS_PER_XFER 1024
+#define INDIRECT_ACCESS 0
+#define DIRECT_ACCESS 1
+
#define COLOR_BLT_CMD (2 << 29 | 0x40 << 22 | (5 - 2))
#define XY_COLOR_BLT_CMD (2 << 29 | 0x50 << 22)
#define XY_FAST_COLOR_BLT_CMD (2 << 29 | 0x44 << 22)
@@ -16,7 +16,8 @@ struct insert_pte_data {
};
#define CHUNK_SZ SZ_8M /* ~1ms at 8GiB/s preemption delay */
-
+#define GET_CCS_BYTES(i915, size) (HAS_FLAT_CCS(i915) ? \
+ DIV_ROUND_UP(size, NUM_BYTES_PER_CCS_BYTE) : 0)
static bool engine_supports_migration(struct intel_engine_cs *engine)
{
if (!engine)
@@ -467,6 +468,110 @@ static bool wa_1209644611_applies(int ver, u32 size)
return height % 4 == 3 && height <= 8;
}
+/**
+ * DOC: Flat-CCS - Memory compression for Local memory
+ *
+ * On Xe-HP and later devices, we use dedicated compression control state (CCS)
+ * stored in local memory for each surface, to support the 3D and media
+ * compression formats.
+ *
+ * The memory required for the CCS of the entire local memory is 1/256 of the
+ * local memory size. So before the kernel boot, the required memory is reserved
+ * for the CCS data and a secure register will be programmed with the CCS base
+ * address.
+ *
+ * Flat CCS data needs to be cleared when a lmem object is allocated.
+ * And CCS data can be copied in and out of CCS region through
+ * XY_CTRL_SURF_COPY_BLT. CPU can't access the CCS data directly.
+ *
+ * When we exhaust the lmem, if the object's placements support smem, then we can
+ * directly decompress the compressed lmem object into smem and start using it
+ * from smem itself.
+ *
+ * But when we need to swapout the compressed lmem object into a smem region
+ * though objects' placement doesn't support smem, then we copy the lmem content
+ * as it is into smem region along with ccs data (using XY_CTRL_SURF_COPY_BLT).
+ * When the object is referred, lmem content will be swaped in along with
+ * restoration of the CCS data (using XY_CTRL_SURF_COPY_BLT) at corresponding
+ * location.
+ */
+
+static inline u32 *i915_flush_dw(u32 *cmd, u32 flags)
+{
+ *cmd++ = MI_FLUSH_DW | flags;
+ *cmd++ = 0;
+ *cmd++ = 0;
+
+ return cmd;
+}
+
+static u32 calc_ctrl_surf_instr_size(struct drm_i915_private *i915, int size)
+{
+ u32 num_cmds, num_blks, total_size;
+
+ if (!GET_CCS_BYTES(i915, size))
+ return 0;
+
+ /*
+ * XY_CTRL_SURF_COPY_BLT transfers CCS in 256 byte
+ * blocks. one XY_CTRL_SURF_COPY_BLT command can
+ * transfer upto 1024 blocks.
+ */
+ num_blks = DIV_ROUND_UP(GET_CCS_BYTES(i915, size),
+ NUM_CCS_BYTES_PER_BLOCK);
+ num_cmds = DIV_ROUND_UP(num_blks, NUM_CCS_BLKS_PER_XFER);
+ total_size = XY_CTRL_SURF_INSTR_SIZE * num_cmds;
+
+ /*
+ * Adding a flush before and after XY_CTRL_SURF_COPY_BLT
+ */
+ total_size += 2 * MI_FLUSH_DW_SIZE;
+
+ return total_size;
+}
+
+static u32 *_i915_ctrl_surf_copy_blt(u32 *cmd, u64 src_addr, u64 dst_addr,
+ u8 src_mem_access, u8 dst_mem_access,
+ int src_mocs, int dst_mocs,
+ u32 ccs_blocks)
+{
+ /*
+ * The XY_CTRL_SURF_COPY_BLT instruction is used to copy the CCS
+ * data in and out of the CCS region.
+ *
+ * We can copy at most 1024 blocks of 256 bytes using one
+ * XY_CTRL_SURF_COPY_BLT instruction.
+ *
+ * In case we need to copy more than 1024 blocks, we need to add
+ * another instruction to the same batch buffer.
+ *
+ * 1024 blocks of 256 bytes of CCS represent a total 256KB of CCS.
+ *
+ * 256 KB of CCS represents 256 * 256 KB = 64 MB of LMEM.
+ */
+ do {
+ int blks_per_copy;
+
+ blks_per_copy = ccs_blocks >= NUM_CCS_BLKS_PER_XFER ?
+ NUM_CCS_BLKS_PER_XFER : ccs_blocks;
+ *cmd++ = XY_CTRL_SURF_COPY_BLT |
+ src_mem_access << SRC_ACCESS_TYPE_SHIFT |
+ dst_mem_access << DST_ACCESS_TYPE_SHIFT |
+ FIELD_PREP(CCS_SIZE_MASK, blks_per_copy - 1);
+ *cmd++ = lower_32_bits(src_addr);
+ *cmd++ = (upper_32_bits(src_addr) & 0xFFFF) |
+ FIELD_PREP(XY_CTRL_SURF_MOCS_MASK, src_mocs);
+ *cmd++ = lower_32_bits(dst_addr);
+ *cmd++ = (upper_32_bits(dst_addr) & 0xFFFF) |
+ FIELD_PREP(XY_CTRL_SURF_MOCS_MASK, dst_mocs);
+ src_addr += SZ_64M;
+ dst_addr += SZ_64M;
+ ccs_blocks -= blks_per_copy;
+ } while (ccs_blocks > 0);
+
+ return cmd;
+}
+
static int emit_copy(struct i915_request *rq,
u32 dst_offset, u32 src_offset, int size)
{
@@ -618,8 +723,9 @@ static int emit_clear(struct i915_request *rq, u64 offset, int size,
u32 value, bool is_lmem)
{
struct drm_i915_private *i915 = rq->engine->i915;
- int mocs = rq->engine->gt->mocs.uc_index << 1;
+ u32 mocs = rq->engine->gt->mocs.uc_index << 1;
const int ver = GRAPHICS_VER(i915);
+ u32 num_ccs_blks, ccs_ring_size = 0;
int ring_sz;
u32 *cs;
@@ -634,7 +740,12 @@ static int emit_clear(struct i915_request *rq, u64 offset, int size,
else
ring_sz = 6;
- cs = intel_ring_begin(rq, ring_sz);
+ /* Clear CCS only when value is 0 */
+ ccs_ring_size = (HAS_FLAT_CCS(i915) && is_lmem && !value) ?
+ calc_ctrl_surf_instr_size(i915, size) : 0;
+ ring_sz += ccs_ring_size;
+
+ cs = intel_ring_begin(rq, round_up(ring_sz, 2));
if (IS_ERR(cs))
return PTR_ERR(cs);
@@ -679,6 +790,27 @@ static int emit_clear(struct i915_request *rq, u64 offset, int size,
*cs++ = value;
}
+ if (ccs_ring_size) {
+ num_ccs_blks = DIV_ROUND_UP(GET_CCS_BYTES(i915, size),
+ NUM_CCS_BYTES_PER_BLOCK);
+
+ /*
+ * Flat CCS surface can only be accessed via
+ * XY_CTRL_SURF_COPY_BLT CMD and using indirect
+ * mapping of associated LMEM.
+ * We can clear ccs surface by writing all 0s,
+ * so we will flush the previously cleared buffer
+ * and use it as a source.
+ */
+ cs = i915_flush_dw(cs, MI_FLUSH_DW_LLC | MI_FLUSH_DW_CCS);
+ cs = _i915_ctrl_surf_copy_blt(cs, offset, offset,
+ DIRECT_ACCESS, INDIRECT_ACCESS,
+ mocs, mocs, num_ccs_blks);
+ cs = i915_flush_dw(cs, MI_FLUSH_DW_LLC | MI_FLUSH_DW_CCS);
+ }
+ if (ring_sz & 1)
+ *cs++ = MI_NOOP;
+
intel_ring_advance(rq, cs);
return 0;
}
Xe-HP and latest devices support Flat CCS which reserved a portion of the device memory to store compression metadata, during the clearing of device memory buffer object we also need to clear the associated CCS buffer. XY_CTRL_SURF_COPY_BLT is a BLT cmd used for reading and writing the ccs surface of a lmem memory. So on Flat-CCS capable platform we use XY_CTRL_SURF_COPY_BLT to clear the CCS meta data. v2: Fixed issues with platform naming [Lucas] v3: Rebased [Ram] Used the round_up funcs [Bob] v4: Fixed ccs blk calculation [Ram] Added Kdoc on flat-ccs. v5: GENMASK is used [Matt] mocs fix [Matt] Comments Fix [Matt] Flush address programming [Ram] v6: FLUSH_DW is fixed Few coding style fix v7: Adopting the XY_FAST_COLOR_BLT (Thomas] v8: XY_CTRL_SURF_COPY_BLT for ccs clearing. Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com> --- drivers/gpu/drm/i915/gt/intel_gpu_commands.h | 15 ++ drivers/gpu/drm/i915/gt/intel_migrate.c | 138 ++++++++++++++++++- 2 files changed, 150 insertions(+), 3 deletions(-)