@@ -14,6 +14,7 @@
#include "intel_panel.h"
#include "intel_psr.h"
#include "intel_uncore.h"
+#include "intel_tc.h"
bool intel_is_c10phy(struct drm_i915_private *dev_priv, enum phy phy)
{
@@ -234,6 +235,18 @@ static void intel_cx0_write(struct drm_i915_private *i915, enum port port,
}
}
+static void intel_c20_write(struct drm_i915_private *i915, enum port port,
+ int lane, u16 addr, u16 data)
+{
+ assert_dc_off(i915);
+
+ intel_cx0_write(i915, port, lane, PHY_C20_WR_ADDRESS_H, (addr >> 8) & 0xff, 0);
+ intel_cx0_write(i915, port, lane, PHY_C20_WR_ADDRESS_L, addr & 0xff, 0);
+
+ intel_cx0_write(i915, port, lane, PHY_C20_WR_DATA_H, (data >> 8) & 0xff, 0);
+ intel_cx0_write(i915, port, lane, PHY_C20_WR_DATA_L, data & 0xff, 1);
+}
+
static void __intel_cx0_rmw(struct drm_i915_private *i915, enum port port,
int lane, u16 addr, u8 clear, u8 set, bool committed)
{
@@ -765,7 +778,7 @@ static int intel_c10mpllb_calc_state(struct intel_crtc_state *crtc_state,
for (i = 0; tables[i]; i++) {
if (crtc_state->port_clock <= tables[i]->clock) {
- crtc_state->c10mpllb_state = *tables[i];
+ crtc_state->cx0pll_state.c10mpllb_state = *tables[i];
return 0;
}
}
@@ -825,7 +838,7 @@ static void intel_c10_pll_program(struct drm_i915_private *i915,
const struct intel_crtc_state *crtc_state,
struct intel_encoder *encoder)
{
- const struct intel_c10mpllb_state *pll_state = &crtc_state->c10mpllb_state;
+ const struct intel_c10mpllb_state *pll_state = &crtc_state->cx0pll_state.c10mpllb_state;
struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
u8 master_lane = lane_reversal ? INTEL_CX0_LANE1 :
@@ -907,6 +920,218 @@ void intel_c10mpllb_dump_hw_state(struct drm_i915_private *dev_priv,
i + 2, hw_state->pll[i + 2], i + 3, hw_state->pll[i + 3]);
}
+static bool intel_c20_use_mplla(u32 clock)
+{
+ /* 10G and 20G rates use MPLLA */
+ if (clock == 312500 || clock == 625000)
+ return true;
+
+ return false;
+}
+
+static u8 intel_c20_get_dp_rate(u32 clock)
+{
+ switch (clock) {
+ case 162000: /* 1.62 Gbps DP1.4 */
+ return 0;
+ case 270000: /* 2.7 Gbps DP1.4 */
+ return 1;
+ case 540000: /* 5.4 Gbps DP 1.4 */
+ return 2;
+ case 810000: /* 8.1 Gbps DP1.4 */
+ return 3;
+ case 216000: /* 2.16 Gbps eDP */
+ return 4;
+ case 243000: /* 2.43 Gbps eDP */
+ return 5;
+ case 324000: /* 3.24 Gbps eDP */
+ return 6;
+ case 432000: /* 4.32 Gbps eDP */
+ return 7;
+ case 312500: /* 10 Gbps DP2.0 */
+ return 8;
+ case 421875: /* 13.5 Gbps DP2.0 */
+ return 9;
+ case 625000: /* 20 Gbps DP2.0*/
+ return 10;
+ default:
+ MISSING_CASE(clock);
+ return 0;
+ }
+}
+
+static u8 intel_c20_get_hdmi_rate(u32 clock)
+{
+ switch (clock) {
+ case 25175:
+ case 27000:
+ case 74250:
+ case 148500:
+ case 594000:
+ return 0;
+ case 166670: /* 3 Gbps */
+ case 333330: /* 6 Gbps */
+ case 666670: /* 12 Gbps */
+ return 1;
+ case 444440: /* 8 Gbps */
+ return 2;
+ case 555560: /* 10 Gbps */
+ return 3;
+ default:
+ MISSING_CASE(clock);
+ return 0;
+ }
+}
+
+static bool is_dp2(u32 clock)
+{
+ /* DP2.0 clock rates */
+ if (clock == 312500 || clock == 421875 || clock == 625000)
+ return true;
+
+ return false;
+}
+
+static bool is_hdmi_frl(u32 clock)
+{
+ switch (clock) {
+ case 166670: /* 3 Gbps */
+ case 333330: /* 6 Gbps */
+ case 444440: /* 8 Gbps */
+ case 555560: /* 10 Gbps */
+ case 666670: /* 12 Gbps */
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool intel_c20_protocol_switch_valid(struct intel_encoder *encoder)
+{
+ struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
+
+ /* banks should not be cleared for DPALT/USB4/TBT modes */
+ /* TODO: optimize re-calibration in legacy mode */
+ return intel_tc_port_in_legacy_mode(intel_dig_port);
+}
+
+static void intel_c20_pll_program(struct drm_i915_private *i915,
+ const struct intel_crtc_state *crtc_state,
+ struct intel_encoder *encoder)
+{
+ const struct intel_c20pll_state *pll_state = &crtc_state->cx0pll_state.c20pll_state;
+ bool dp = false;
+ int lane_count = crtc_state->lane_count;
+ bool cntx;
+ int i;
+
+ if (intel_crtc_has_dp_encoder(crtc_state))
+ dp = true;
+
+ /* 1. Read current context selection */
+ cntx = intel_cx0_read(i915, encoder->port, 0, PHY_C20_VDR_CUSTOM_SERDES_RATE) &
+ PHY_C20_CONTEXT_TOGGLE;
+
+ /* 2. If there is a protocol switch from HDMI to DP or vice versa, clear
+ * the lane #0 MPLLB CAL_DONE_BANK DP2.0 10G and 20G rates enable MPLLA.
+ * Protocol switch is only applicable for MPLLA
+ */
+ if (intel_c20_protocol_switch_valid(encoder)) {
+ for (i = 0; i < 4; i++)
+ intel_c20_write(i915, encoder->port, 0, RAWLANEAONX_DIG_TX_MPLLB_CAL_DONE_BANK(i), 0);
+ }
+
+ /* 3. Write SRAM configuration context. If A in use, write configuration to B context */
+ /* 3.1 Tx configuration */
+ for (i = 0; i < 3; i++) {
+ if (cntx)
+ intel_c20_write(i915, encoder->port, 0, PHY_C20_A_TX_CNTX_CFG(i), pll_state->tx[i]);
+ else
+ intel_c20_write(i915, encoder->port, 0, PHY_C20_B_TX_CNTX_CFG(i), pll_state->tx[i]);
+ }
+
+ /* 3.2 common configuration */
+ for (i = 0; i < 4; i++) {
+ if (cntx)
+ intel_c20_write(i915, encoder->port, 0, PHY_C20_A_CMN_CNTX_CFG(i), pll_state->cmn[i]);
+ else
+ intel_c20_write(i915, encoder->port, 0, PHY_C20_B_CMN_CNTX_CFG(i), pll_state->cmn[i]);
+ }
+
+ /* 3.3 mpllb or mplla configuration */
+ if (intel_c20_use_mplla(pll_state->clock)) {
+ for (i = 0; i < 10; i++) {
+ if (cntx)
+ intel_c20_write(i915, encoder->port, 0,
+ PHY_C20_A_MPLLA_CNTX_CFG(i),
+ pll_state->mplla[i]);
+ else
+ intel_c20_write(i915, encoder->port, 0,
+ PHY_C20_B_MPLLA_CNTX_CFG(i),
+ pll_state->mplla[i]);
+ }
+ } else {
+ for (i = 0; i < 11; i++) {
+ if (cntx)
+ intel_c20_write(i915, encoder->port, 0,
+ PHY_C20_A_MPLLB_CNTX_CFG(i),
+ pll_state->mpllb[i]);
+ else
+ intel_c20_write(i915, encoder->port, 0,
+ PHY_C20_B_MPLLB_CNTX_CFG(i),
+ pll_state->mpllb[i]);
+ }
+ }
+
+ /* 4. Program custom width to match the link protocol */
+ if (dp) {
+ intel_cx0_write(i915, encoder->port, INTEL_CX0_LANE0, PHY_C20_VDR_CUSTOM_WIDTH,
+ is_dp2(pll_state->clock) ? 2 : 0,
+ MB_WRITE_COMMITTED);
+ if (lane_count == 4)
+ intel_cx0_write(i915, encoder->port, INTEL_CX0_LANE1, PHY_C20_VDR_CUSTOM_WIDTH,
+ is_dp2(pll_state->clock) ? 2 : 0,
+ MB_WRITE_COMMITTED);
+ } else if (is_hdmi_frl(pll_state->clock)) {
+ intel_cx0_write(i915, encoder->port, INTEL_CX0_LANE0, PHY_C20_VDR_CUSTOM_WIDTH,
+ 1, MB_WRITE_COMMITTED);
+ if (lane_count == 4)
+ intel_cx0_write(i915, encoder->port, INTEL_CX0_LANE1,
+ PHY_C20_VDR_CUSTOM_WIDTH, 1, MB_WRITE_COMMITTED);
+ } else
+ intel_cx0_write(i915, encoder->port, INTEL_CX0_BOTH_LANES, PHY_C20_VDR_CUSTOM_WIDTH,
+ 0, MB_WRITE_COMMITTED);
+
+ /* 5. For DP or 6. For HDMI */
+ if (dp) {
+ intel_cx0_write(i915, encoder->port, INTEL_CX0_LANE0, PHY_C20_VDR_CUSTOM_SERDES_RATE,
+ BIT(6) | (intel_c20_get_dp_rate(pll_state->clock) << 1),
+ MB_WRITE_COMMITTED);
+ if (lane_count == 4)
+ intel_cx0_write(i915, encoder->port, INTEL_CX0_LANE1, PHY_C20_VDR_CUSTOM_SERDES_RATE,
+ BIT(6) | (intel_c20_get_dp_rate(pll_state->clock) << 1),
+ MB_WRITE_COMMITTED);
+ } else {
+ intel_cx0_write(i915, encoder->port, INTEL_CX0_BOTH_LANES, PHY_C20_VDR_CUSTOM_SERDES_RATE,
+ ((is_hdmi_frl(pll_state->clock) ? 1 : 0) << 7),
+ MB_WRITE_COMMITTED);
+
+ intel_cx0_write(i915, encoder->port, INTEL_CX0_BOTH_LANES, PHY_C20_VDR_HDMI_RATE,
+ (intel_c20_get_hdmi_rate(pll_state->clock) << 0),
+ MB_WRITE_COMMITTED);
+ }
+
+ /*
+ * 7. Write Vendor specific registers to toggle context setting to load
+ * the updated programming toggle context bit
+ */
+ intel_cx0_write(i915, encoder->port, INTEL_CX0_LANE0, PHY_C20_VDR_CUSTOM_SERDES_RATE,
+ cntx ? 0 : 1, MB_WRITE_COMMITTED);
+ if (lane_count == 4)
+ intel_cx0_write(i915, encoder->port, INTEL_CX0_LANE1, PHY_C20_VDR_CUSTOM_SERDES_RATE,
+ cntx ? 0 : 1, MB_WRITE_COMMITTED);
+}
+
int intel_c10mpllb_calc_port_clock(struct intel_encoder *encoder,
const struct intel_c10mpllb_state *pll_state)
{
@@ -945,7 +1170,11 @@ static void intel_program_port_clock_ctl(struct intel_encoder *encoder,
val |= XELPDP_LANE1_PHY_CLOCK_SELECT;
val |= XELPDP_FORWARD_CLOCK_UNGATE;
- val |= XELPDP_DDI_CLOCK_SELECT(XELPDP_DDI_CLOCK_SELECT_MAXPCLK);
+
+ if (is_hdmi_frl(crtc_state->port_clock))
+ val |= XELPDP_DDI_CLOCK_SELECT(XELPDP_DDI_CLOCK_SELECT_DIV18CLK);
+ else
+ val |= XELPDP_DDI_CLOCK_SELECT(XELPDP_DDI_CLOCK_SELECT_MAXPCLK);
if (intel_crtc_has_dp_encoder(crtc_state)) {
intel_dp = enc_to_intel_dp(encoder);
@@ -1175,8 +1404,8 @@ static u32 intel_cx0_get_pclk_pll_ack(u8 lane)
XELPDP_LANE1_PCLK_REFCLK_REQUEST;
}
-static void intel_c10pll_enable(struct intel_encoder *encoder,
- const struct intel_crtc_state *crtc_state)
+void intel_cx0pll_enable(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
enum phy phy = intel_port_to_phy(i915, encoder->port);
@@ -1184,6 +1413,7 @@ static void intel_c10pll_enable(struct intel_encoder *encoder,
bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
u8 maxpclk_lane = lane_reversal ? INTEL_CX0_LANE1 :
INTEL_CX0_LANE0;
+ intel_wakeref_t wakeref = intel_cx0_phy_transaction_begin(encoder);
/*
* 1. Program PORT_CLOCK_CTL REGISTER to configure
@@ -1202,7 +1432,10 @@ static void intel_c10pll_enable(struct intel_encoder *encoder,
CX0_P2_STATE_READY);
/* 4. Program PHY internal PLL internal registers. */
- intel_c10_pll_program(i915, crtc_state, encoder);
+ if (intel_is_c10phy(i915, phy))
+ intel_c10_pll_program(i915, crtc_state, encoder);
+ else
+ intel_c20_pll_program(i915, crtc_state, encoder);
/*
* 5. Program the enabled and disabled owned PHY lane
@@ -1241,31 +1474,21 @@ static void intel_c10pll_enable(struct intel_encoder *encoder,
* 10. Follow the Display Voltage Frequency Switching Sequence After
* Frequency Change. We handle this step in bxt_set_cdclk().
*/
-}
-
-void intel_cx0pll_enable(struct intel_encoder *encoder,
- const struct intel_crtc_state *crtc_state)
-{
- struct drm_i915_private *i915 = to_i915(encoder->base.dev);
- enum phy phy = intel_port_to_phy(i915, encoder->port);
- intel_wakeref_t wakeref;
-
- wakeref = intel_cx0_phy_transaction_begin(encoder);
-
- drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
- intel_c10pll_enable(encoder, crtc_state);
intel_cx0_phy_transaction_end(encoder, wakeref);
}
-static void intel_c10pll_disable(struct intel_encoder *encoder)
+void intel_cx0pll_disable(struct intel_encoder *encoder)
{
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
enum phy phy = intel_port_to_phy(i915, encoder->port);
+ bool is_c10 = intel_is_c10phy(i915, phy);
+ intel_wakeref_t wakeref = intel_cx0_phy_transaction_begin(encoder);
/* 1. Change owned PHY lane power to Disable state. */
intel_cx0_powerdown_change_sequence(i915, encoder->port, INTEL_CX0_BOTH_LANES,
- CX0_P2PG_STATE_DISABLE);
+ is_c10 ? CX0_P2PG_STATE_DISABLE :
+ CX0_P4PG_STATE_DISABLE);
/*
* 2. Follow the Display Voltage Frequency Switching Sequence Before
@@ -1303,18 +1526,6 @@ static void intel_c10pll_disable(struct intel_encoder *encoder)
XELPDP_DDI_CLOCK_SELECT_MASK, 0);
intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
XELPDP_FORWARD_CLOCK_UNGATE, 0);
-}
-
-void intel_cx0pll_disable(struct intel_encoder *encoder)
-{
- struct drm_i915_private *i915 = to_i915(encoder->base.dev);
- enum phy phy = intel_port_to_phy(i915, encoder->port);
- intel_wakeref_t wakeref;
-
- wakeref = intel_cx0_phy_transaction_begin(encoder);
-
- drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
- intel_c10pll_disable(encoder);
intel_cx0_phy_transaction_end(encoder, wakeref);
}
@@ -1324,7 +1535,7 @@ void intel_c10mpllb_state_verify(struct intel_atomic_state *state,
{
struct drm_i915_private *i915 = to_i915(state->base.dev);
struct intel_c10mpllb_state mpllb_hw_state = { 0 };
- struct intel_c10mpllb_state *mpllb_sw_state = &new_crtc_state->c10mpllb_state;
+ struct intel_c10mpllb_state *mpllb_sw_state = &new_crtc_state->cx0pll_state.c10mpllb_state;
struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
struct intel_encoder *encoder;
struct intel_dp *intel_dp;
@@ -170,4 +170,34 @@
#define C10_PHY_VSWING_PREEMPH_MASK REG_GENMASK8(1, 0)
#define C10_PHY_VSWING_PREEMPH(val) REG_FIELD_PREP8(C10_PHY_VSWING_PREEMPH_MASK, val)
+/* C20 Registers */
+#define PHY_C20_WR_ADDRESS_L 0xC02
+#define PHY_C20_WR_ADDRESS_H 0xC03
+#define PHY_C20_WR_DATA_L 0xC04
+#define PHY_C20_WR_DATA_H 0xC05
+#define PHY_C20_RD_ADDRESS_L 0xC06
+#define PHY_C20_RD_ADDRESS_H 0xC07
+#define PHY_C20_RD_DATA_L 0xC08
+#define PHY_C20_RD_DATA_H 0xC09
+#define PHY_C20_VDR_CUSTOM_SERDES_RATE 0xD00
+#define PHY_C20_VDR_HDMI_RATE 0xD01
+#define PHY_C20_CONTEXT_TOGGLE REG_BIT8(0)
+#define PHY_C20_VDR_CUSTOM_WIDTH 0xD02
+#define PHY_C20_A_TX_CNTX_CFG(idx) (0xCF2E - (idx))
+#define PHY_C20_B_TX_CNTX_CFG(idx) (0xCF2A - (idx))
+#define PHY_C20_A_CMN_CNTX_CFG(idx) (0xCDAA - (idx))
+#define PHY_C20_B_CMN_CNTX_CFG(idx) (0xCDA5 - (idx))
+#define PHY_C20_A_MPLLA_CNTX_CFG(idx) (0xCCF0 - (idx))
+#define PHY_C20_B_MPLLA_CNTX_CFG(idx) (0xCCE5 - (idx))
+#define PHY_C20_A_MPLLB_CNTX_CFG(idx) (0xCB5A - (idx))
+#define PHY_C20_B_MPLLB_CNTX_CFG(idx) (0xCB4E - (idx))
+
+#define C20_MPLLB_FRACEN REG_BIT(13)
+#define C20_MPLLA_FRACEN REG_BIT(14)
+#define C20_MULTIPLIER_MASK REG_GENMASK(11, 0)
+#define C20_MPLLB_TX_CLK_DIV_MASK REG_GENMASK(15, 13)
+#define C20_MPLLA_TX_CLK_DIV_MASK REG_GENMASK(10, 8)
+
+#define RAWLANEAONX_DIG_TX_MPLLB_CAL_DONE_BANK(idx) (0x303D + (idx))
+
#endif /* __INTEL_CX0_REG_DEFS_H__ */
@@ -3038,6 +3038,11 @@ intel_ddi_update_prepare(struct intel_atomic_state *state,
intel_tc_port_get_link(enc_to_dig_port(encoder),
required_lanes);
+
+ /* FIXME: Add MTL pll_mgr */
+ if (DISPLAY_VER(i915) >= 14)
+ return;
+
if (crtc_state && crtc_state->hw.active) {
struct intel_crtc *slave_crtc;
@@ -3496,9 +3501,9 @@ static void mtl_ddi_get_config(struct intel_encoder *encoder,
drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
- intel_c10mpllb_readout_hw_state(encoder, &crtc_state->c10mpllb_state);
- intel_c10mpllb_dump_hw_state(i915, &crtc_state->c10mpllb_state);
- crtc_state->port_clock = intel_c10mpllb_calc_port_clock(encoder, &crtc_state->c10mpllb_state);
+ intel_c10mpllb_readout_hw_state(encoder, &crtc_state->cx0pll_state.c10mpllb_state);
+ intel_c10mpllb_dump_hw_state(i915, &crtc_state->cx0pll_state.c10mpllb_state);
+ crtc_state->port_clock = intel_c10mpllb_calc_port_clock(encoder, &crtc_state->cx0pll_state.c10mpllb_state);
intel_ddi_get_config(encoder, crtc_state);
}
@@ -974,6 +974,23 @@ struct intel_c10mpllb_state {
u8 pll[20];
};
+struct intel_c20pll_state {
+ u32 clock; /* in kHz */
+ u16 tx[3];
+ u16 cmn[4];
+ union {
+ u16 mplla[10];
+ u16 mpllb[11];
+ };
+};
+
+struct intel_cx0pll_state {
+ union {
+ struct intel_c10mpllb_state c10mpllb_state;
+ struct intel_c20pll_state c20pll_state;
+ };
+};
+
struct intel_crtc_state {
/*
* uapi (drm) state. This is the software state shown to userspace.
@@ -1113,7 +1130,7 @@ struct intel_crtc_state {
union {
struct intel_dpll_hw_state dpll_hw_state;
struct intel_mpllb_state mpllb_state;
- struct intel_c10mpllb_state c10mpllb_state;
+ struct intel_cx0pll_state cx0pll_state;
};
/*
@@ -52,6 +52,7 @@
#include "intel_combo_phy_regs.h"
#include "intel_connector.h"
#include "intel_crtc.h"
+#include "intel_cx0_phy.h"
#include "intel_ddi.h"
#include "intel_de.h"
#include "intel_display_types.h"
@@ -422,7 +423,14 @@ static int ehl_max_source_rate(struct intel_dp *intel_dp)
static int mtl_max_source_rate(struct intel_dp *intel_dp)
{
- return intel_dp_is_edp(intel_dp) ? 675000 : 810000;
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
+ enum phy phy = intel_port_to_phy(i915, dig_port->base.port);
+
+ if (intel_is_c10phy(i915, phy))
+ return intel_dp_is_edp(intel_dp) ? 675000 : 810000;
+
+ return 2000000;
}
static int vbt_max_link_rate(struct intel_dp *intel_dp)
@@ -451,7 +459,7 @@ intel_dp_set_source_rates(struct intel_dp *intel_dp)
/* The values must be in increasing order */
static const int mtl_rates[] = {
162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000,
- 810000,
+ 810000, 1000000, 1350000, 2000000,
};
static const int icl_rates[] = {
162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000,