diff mbox series

drm/i915/gsc: Fix the Driver-FLR completion

Message ID 20230224001758.544817-1-alan.previn.teres.alexis@intel.com (mailing list archive)
State New, archived
Headers show
Series drm/i915/gsc: Fix the Driver-FLR completion | expand

Commit Message

Alan Previn Feb. 24, 2023, 12:17 a.m. UTC
The Driver-FLR flow may inadvertently exit early before the full
completion of the re-init of the internal HW state if we only poll
GU_DEBUG Bit31 (polling for it to toggle from 0 -> 1). Instead
we need a two-step completion wait-for-completion flow that also
involves GU_CNTL. See the patch and new code comments for detail.
This is new direction from HW architecture folks.

   v2: - Add error message for the teardown timeout (Anshuman)
       - Don't duplicate code in comments (Jani)
   v3: - Add get/put runtime-pm for this function. Though
         not functionally required during unload, its so the uncore
	 doesn't complain.
   v4: - Remove the get/put runtime-pm - that was for a prior
         version of this patch (not needed for drm-managed callback).
       - Remove the fixes tag since this is only for MTL and MTL
         still needs force probe (Daniele).
       - Bit 31 of GU_CNTL should be DRIVERFLR instead of
         DRIVERFLR_STATUS (Daniele).

Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Tested-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
---
 drivers/gpu/drm/i915/intel_uncore.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
index f018da7ebaac..7b8fd3b7ff82 100644
--- a/drivers/gpu/drm/i915/intel_uncore.c
+++ b/drivers/gpu/drm/i915/intel_uncore.c
@@ -2749,14 +2749,25 @@  static void driver_initiated_flr(struct intel_uncore *uncore)
 	/* Trigger the actual Driver-FLR */
 	intel_uncore_rmw_fw(uncore, GU_CNTL, 0, DRIVERFLR);
 
+	/* Wait for hardware teardown to complete */
+	ret = intel_wait_for_register_fw(uncore, GU_CNTL,
+					 DRIVERFLR, 0,
+					 flr_timeout_ms);
+	if (ret) {
+		drm_err(&i915->drm, "Driver-FLR-teardown wait completion failed! %d\n", ret);
+		return;
+	}
+
+	/* Wait for hardware/firmware re-init to complete */
 	ret = intel_wait_for_register_fw(uncore, GU_DEBUG,
 					 DRIVERFLR_STATUS, DRIVERFLR_STATUS,
 					 flr_timeout_ms);
 	if (ret) {
-		drm_err(&i915->drm, "wait for Driver-FLR completion failed! %d\n", ret);
+		drm_err(&i915->drm, "Driver-FLR-reinit wait completion failed! %d\n", ret);
 		return;
 	}
 
+	/* Clear sticky completion status */
 	intel_uncore_write_fw(uncore, GU_DEBUG, DRIVERFLR_STATUS);
 }