@@ -1735,28 +1735,9 @@ static int dsi_host_parse_lane_data(struct msm_dsi_host *msm_host,
return -EINVAL;
}
-static u32 dsi_dsc_rc_buf_thresh[DSC_NUM_BUF_RANGES - 1] = {
- 0x0e, 0x1c, 0x2a, 0x38, 0x46, 0x54, 0x62,
- 0x69, 0x70, 0x77, 0x79, 0x7b, 0x7d, 0x7e
-};
-
-/* only 8bpc, 8bpp added */
-static char min_qp[DSC_NUM_BUF_RANGES] = {
- 0, 0, 1, 1, 3, 3, 3, 3, 3, 3, 5, 5, 5, 7, 13
-};
-
-static char max_qp[DSC_NUM_BUF_RANGES] = {
- 4, 4, 5, 6, 7, 7, 7, 8, 9, 10, 11, 12, 13, 13, 15
-};
-
-static char bpg_offset[DSC_NUM_BUF_RANGES] = {
- 2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12
-};
-
static int dsi_populate_dsc_params(struct msm_dsi_host *msm_host, struct drm_dsc_config *dsc)
{
- int i;
- u16 bpp = dsc->bits_per_pixel >> 4;
+ int ret;
if (dsc->bits_per_pixel & 0xf) {
DRM_DEV_ERROR(&msm_host->pdev->dev, "DSI does not support fractional bits_per_pixel\n");
@@ -1768,49 +1749,23 @@ static int dsi_populate_dsc_params(struct msm_dsi_host *msm_host, struct drm_dsc
return -EOPNOTSUPP;
}
- dsc->rc_model_size = 8192;
- dsc->first_line_bpg_offset = 12;
- dsc->rc_edge_factor = 6;
- dsc->rc_tgt_offset_high = 3;
- dsc->rc_tgt_offset_low = 3;
dsc->simple_422 = 0;
dsc->convert_rgb = 1;
dsc->vbr_enable = 0;
- /* handle only bpp = bpc = 8 */
- for (i = 0; i < DSC_NUM_BUF_RANGES - 1 ; i++)
- dsc->rc_buf_thresh[i] = dsi_dsc_rc_buf_thresh[i];
+ drm_dsc_set_const_params(dsc);
+ drm_dsc_set_rc_buf_thresh(dsc);
- for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
- dsc->rc_range_params[i].range_min_qp = min_qp[i];
- dsc->rc_range_params[i].range_max_qp = max_qp[i];
- /*
- * Range BPG Offset contains two's-complement signed values that fill
- * 8 bits, yet the registers and DCS PPS field are only 6 bits wide.
- */
- dsc->rc_range_params[i].range_bpg_offset = bpg_offset[i] & DSC_RANGE_BPG_OFFSET_MASK;
+ /* handle only bpp = bpc = 8, pre-SCR panels */
+ ret = drm_dsc_setup_rc_params(dsc, DRM_DSC_1_1_PRE_SCR);
+ if (ret) {
+ DRM_DEV_ERROR(&msm_host->pdev->dev, "could not find DSC RC parameters\n");
+ return ret;
}
- dsc->initial_offset = 6144; /* Not bpp 12 */
- if (bpp != 8)
- dsc->initial_offset = 2048; /* bpp = 12 */
-
- if (dsc->bits_per_component <= 10)
- dsc->mux_word_size = DSC_MUX_WORD_SIZE_8_10_BPC;
- else
- dsc->mux_word_size = DSC_MUX_WORD_SIZE_12_BPC;
-
- dsc->initial_xmit_delay = 512;
dsc->initial_scale_value = 32;
- dsc->first_line_bpg_offset = 12;
dsc->line_buf_depth = dsc->bits_per_component + 1;
- /* bpc 8 */
- dsc->flatness_min_qp = 3;
- dsc->flatness_max_qp = 12;
- dsc->rc_quant_incr_limit0 = 11;
- dsc->rc_quant_incr_limit1 = 11;
-
return drm_dsc_compute_rc_parameters(dsc);
}
Use new DRM DSC helpers to setup DSI DSC configuration. The initial_scale_value needs to be adjusted according to the standard, but this is a separate change. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/dsi/dsi_host.c | 61 ++++-------------------------- 1 file changed, 8 insertions(+), 53 deletions(-)