@@ -194,17 +194,7 @@ int amdgpu_sg_display = -1; /* auto */
static void amdgpu_drv_delayed_reset_work_handler(struct work_struct *work);
-DECLARE_DYNDBG_CLASSMAP(drm_debug_classes, DD_CLASS_TYPE_DISJOINT_BITS, 0,
- "DRM_UT_CORE",
- "DRM_UT_DRIVER",
- "DRM_UT_KMS",
- "DRM_UT_PRIME",
- "DRM_UT_ATOMIC",
- "DRM_UT_VBL",
- "DRM_UT_STATE",
- "DRM_UT_LEASE",
- "DRM_UT_DP",
- "DRM_UT_DRMRES");
+DRM_CLASSMAP_USE(drm_debug_classes);
struct amdgpu_mgpu_info mgpu_info = {
.mutex = __MUTEX_INITIALIZER(mgpu_info.mutex),
@@ -41,17 +41,7 @@
#include "drm_dp_helper_internal.h"
-DECLARE_DYNDBG_CLASSMAP(drm_debug_classes, DD_CLASS_TYPE_DISJOINT_BITS, 0,
- "DRM_UT_CORE",
- "DRM_UT_DRIVER",
- "DRM_UT_KMS",
- "DRM_UT_PRIME",
- "DRM_UT_ATOMIC",
- "DRM_UT_VBL",
- "DRM_UT_STATE",
- "DRM_UT_LEASE",
- "DRM_UT_DP",
- "DRM_UT_DRMRES");
+DRM_CLASSMAP_USE(drm_debug_classes);
struct dp_aux_backlight {
struct backlight_device *base;
@@ -50,17 +50,7 @@
#include "drm_crtc_helper_internal.h"
-DECLARE_DYNDBG_CLASSMAP(drm_debug_classes, DD_CLASS_TYPE_DISJOINT_BITS, 0,
- "DRM_UT_CORE",
- "DRM_UT_DRIVER",
- "DRM_UT_KMS",
- "DRM_UT_PRIME",
- "DRM_UT_ATOMIC",
- "DRM_UT_VBL",
- "DRM_UT_STATE",
- "DRM_UT_LEASE",
- "DRM_UT_DP",
- "DRM_UT_DRMRES");
+DRM_CLASSMAP_USE(drm_debug_classes);
/**
* DOC: overview
@@ -55,18 +55,19 @@ MODULE_PARM_DESC(debug, "Enable debug output, where each bit enables a debug cat
#if !defined(CONFIG_DRM_USE_DYNAMIC_DEBUG)
module_param_named(debug, __drm_debug, ulong, 0600);
#else
-/* classnames must match vals of enum drm_debug_category */
-DECLARE_DYNDBG_CLASSMAP(drm_debug_classes, DD_CLASS_TYPE_DISJOINT_BITS, 0,
- "DRM_UT_CORE",
- "DRM_UT_DRIVER",
- "DRM_UT_KMS",
- "DRM_UT_PRIME",
- "DRM_UT_ATOMIC",
- "DRM_UT_VBL",
- "DRM_UT_STATE",
- "DRM_UT_LEASE",
- "DRM_UT_DP",
- "DRM_UT_DRMRES");
+/* classnames must match value-symbols of enum drm_debug_category */
+DRM_CLASSMAP_DEFINE(drm_debug_classes, DD_CLASS_TYPE_DISJOINT_BITS,
+ DRM_UT_CORE,
+ "DRM_UT_CORE",
+ "DRM_UT_DRIVER",
+ "DRM_UT_KMS",
+ "DRM_UT_PRIME",
+ "DRM_UT_ATOMIC",
+ "DRM_UT_VBL",
+ "DRM_UT_STATE",
+ "DRM_UT_LEASE",
+ "DRM_UT_DP",
+ "DRM_UT_DRMRES");
static struct ddebug_class_param drm_debug_bitmap = {
.bits = &__drm_debug,
@@ -29,17 +29,7 @@
#include "i915_params.h"
#include "i915_drv.h"
-DECLARE_DYNDBG_CLASSMAP(drm_debug_classes, DD_CLASS_TYPE_DISJOINT_BITS, 0,
- "DRM_UT_CORE",
- "DRM_UT_DRIVER",
- "DRM_UT_KMS",
- "DRM_UT_PRIME",
- "DRM_UT_ATOMIC",
- "DRM_UT_VBL",
- "DRM_UT_STATE",
- "DRM_UT_LEASE",
- "DRM_UT_DP",
- "DRM_UT_DRMRES");
+DRM_CLASSMAP_USE(drm_debug_classes);
#define i915_param_named(name, T, perm, desc) \
module_param_named(name, i915_modparams.name, T, perm); \
@@ -69,17 +69,7 @@
#include "nouveau_svm.h"
#include "nouveau_dmem.h"
-DECLARE_DYNDBG_CLASSMAP(drm_debug_classes, DD_CLASS_TYPE_DISJOINT_BITS, 0,
- "DRM_UT_CORE",
- "DRM_UT_DRIVER",
- "DRM_UT_KMS",
- "DRM_UT_PRIME",
- "DRM_UT_ATOMIC",
- "DRM_UT_VBL",
- "DRM_UT_STATE",
- "DRM_UT_LEASE",
- "DRM_UT_DP",
- "DRM_UT_DRMRES");
+DRM_CLASSMAP_USE(drm_debug_classes);
MODULE_PARM_DESC(config, "option string to pass to driver core");
static char *nouveau_config;
@@ -373,6 +373,7 @@
/* implement dynamic printk debug */ \
. = ALIGN(8); \
BOUNDED_SECTION_BY(__dyndbg_classes, ___dyndbg_classes) \
+ BOUNDED_SECTION_BY(__dyndbg_class_users, ___dyndbg_class_users) \
BOUNDED_SECTION_BY(__dyndbg, ___dyndbg) \
LIKELY_PROFILE() \
BRANCH_PROFILE() \
@@ -276,7 +276,7 @@ static inline struct drm_printer drm_err_printer(const char *prefix)
*
*/
enum drm_debug_category {
- /* These names must match those in DYNAMIC_DEBUG_CLASSBITS */
+ /* Keep DRM_CLASSMAP_DEFINE args in sync with any changes here */
/**
* @DRM_UT_CORE: Used in the generic drm code: drm_ioctl.c, drm_mm.c,
* drm_memory.c, ...
@@ -321,6 +321,14 @@ enum drm_debug_category {
DRM_UT_DRMRES
};
+#ifdef CONFIG_DRM_USE_DYNAMIC_DEBUG
+#define DRM_CLASSMAP_DEFINE(...) DYNDBG_CLASSMAP_DEFINE(__VA_ARGS__)
+#define DRM_CLASSMAP_USE(name) DYNDBG_CLASSMAP_USE(name)
+#else
+#define DRM_CLASSMAP_DEFINE(...)
+#define DRM_CLASSMAP_USE(name)
+#endif
+
static inline bool drm_debug_enabled_raw(enum drm_debug_category category)
{
return unlikely(__drm_debug & BIT(category));
@@ -56,7 +56,7 @@ struct _ddebug {
#endif
} __attribute__((aligned(8)));
-enum class_map_type {
+enum ddebug_class_map_type {
DD_CLASS_TYPE_DISJOINT_BITS,
/**
* DD_CLASS_TYPE_DISJOINT_BITS: classes are independent, mapped to bits[0..N].
@@ -70,24 +70,28 @@ enum class_map_type {
};
struct ddebug_class_map {
- struct module *mod;
- const char *mod_name; /* needed for builtins */
+ const struct module *mod; /* NULL for builtins */
+ const char *mod_name;
const char **class_names;
const int length;
const int base; /* index of 1st .class_id, allows split/shared space */
- enum class_map_type map_type;
+ enum ddebug_class_map_type map_type;
};
/**
- * DECLARE_DYNDBG_CLASSMAP - declare classnames known by a module
- * @_var: a struct ddebug_class_map, passed to module_param_cb
- * @_type: enum class_map_type, chooses bits/verbose, numeric/symbolic
- * @_base: offset of 1st class-name. splits .class_id space
- * @classes: class-names used to control class'd prdbgs
+ * DYNDBG_CLASSMAP_DEFINE - define a set of debug-classes used by a module.
+ * @_var: name of the classmap, exported for other modules coordinated use.
+ * @_type: enum ddebug_class_map_type, chooses bits/verbose, numeric/names.
+ * @_base: offset of 1st class-name, used to share 0..62 classid space
+ * @classes: vals are stringified enum-vals, like DRM_UT_*
+ *
+ * Defines and exports a struct ddebug_class_map whose @classes are
+ * used to validate a "class FOO .." >control command against each
+ * module, and to validate inputs to DD_CLASS_TYPE_*_NAMES typed params.
*/
-#define DECLARE_DYNDBG_CLASSMAP(_var, _maptype, _base, ...) \
- static const char *_var##_classnames[] = { __VA_ARGS__ }; \
- static struct ddebug_class_map __aligned(8) __used \
+#define DYNDBG_CLASSMAP_DEFINE(_var, _maptype, _base, ...) \
+ const char *_var##_classnames[] = { __VA_ARGS__ }; \
+ struct ddebug_class_map __aligned(8) __used \
__section("__dyndbg_classes") _var = { \
.mod = THIS_MODULE, \
.mod_name = KBUILD_MODNAME, \
@@ -95,14 +99,39 @@ struct ddebug_class_map {
.map_type = _maptype, \
.length = ARRAY_SIZE(_var##_classnames), \
.class_names = _var##_classnames, \
+ }; \
+ EXPORT_SYMBOL(_var)
+
+struct ddebug_class_user {
+ char *user_mod_name;
+ struct ddebug_class_map *map;
+};
+/**
+ * DYNDBG_CLASSMAP_USE - refer to a classmap, DEFINEd elsewhere.
+ * @_var: name of the exported classmap var
+ *
+ * This registers a module's use of another module's classmap defn, so
+ * dyndbg can authorize "class DRM_CORE ..." >control commands upon
+ * this module.
+ */
+#define DYNDBG_CLASSMAP_USE(_var) \
+ DYNDBG_CLASSMAP_USE_(_var, __UNIQUE_ID(ddebug_class_user))
+#define DYNDBG_CLASSMAP_USE_(_var, _uname) \
+ extern struct ddebug_class_map _var; \
+ struct ddebug_class_user __used \
+ __section("__dyndbg_class_users") _uname = { \
+ .user_mod_name = KBUILD_MODNAME, \
+ .map = &_var, \
}
/* encapsulate linker provided built-in (or module) dyndbg data */
struct _ddebug_info {
struct _ddebug *descs;
struct ddebug_class_map *classes;
+ struct ddebug_class_user *class_users;
unsigned int num_descs;
unsigned int num_classes;
+ unsigned int num_class_users;
};
struct ddebug_class_param {
@@ -2213,6 +2213,9 @@ static int find_module_sections(struct module *mod, struct load_info *info)
mod->dyndbg_info.classes = section_objs(info, "__dyndbg_classes",
sizeof(*mod->dyndbg_info.classes),
&mod->dyndbg_info.num_classes);
+ mod->dyndbg_info.class_users = section_objs(info, "__dyndbg_class_users",
+ sizeof(*mod->dyndbg_info.class_users),
+ &mod->dyndbg_info.num_class_users);
#endif
return 0;
@@ -79,7 +79,7 @@ obj-$(CONFIG_TEST_SORT) += test_sort.o
obj-$(CONFIG_TEST_USER_COPY) += test_user_copy.o
obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o
obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o
-obj-$(CONFIG_TEST_DYNAMIC_DEBUG) += test_dynamic_debug.o
+obj-$(CONFIG_TEST_DYNAMIC_DEBUG) += test_dynamic_debug.o test_dynamic_debug_submod.o
obj-$(CONFIG_TEST_PRINTF) += test_printf.o
obj-$(CONFIG_TEST_SCANF) += test_scanf.o
obj-$(CONFIG_TEST_BITMAP) += test_bitmap.o
@@ -43,13 +43,16 @@ extern struct _ddebug __start___dyndbg[];
extern struct _ddebug __stop___dyndbg[];
extern struct ddebug_class_map __start___dyndbg_classes[];
extern struct ddebug_class_map __stop___dyndbg_classes[];
+extern struct ddebug_class_user __start___dyndbg_class_users[];
+extern struct ddebug_class_user __stop___dyndbg_class_users[];
struct ddebug_table {
struct list_head link;
const char *mod_name;
struct _ddebug *ddebugs;
struct ddebug_class_map *classes;
- unsigned int num_ddebugs, num_classes;
+ struct ddebug_class_user *class_users;
+ unsigned int num_ddebugs, num_classes, num_class_users;
};
struct ddebug_query {
@@ -147,21 +150,36 @@ static void vpr_info_dq(const struct ddebug_query *query, const char *msg)
query->first_lineno, query->last_lineno, query->class_string);
}
+#define vpr_dt_info(dt, _msg, ...) \
+ v2pr_info(_msg " module:%s nd:%d nc:%d nu:%d\n", ##__VA_ARGS__, \
+ dt->mod_name, dt->num_ddebugs, dt->num_classes, dt->num_class_users)
+
#define __outvar /* filled by callee */
static struct ddebug_class_map *ddebug_find_valid_class(struct ddebug_table const *dt,
const char *class_string,
__outvar int *class_id)
{
struct ddebug_class_map *map;
+ struct ddebug_class_user *cli;
int i, idx;
- for (map = dt->classes, i = 0; i < dt->num_classes; i++, map++) {
+ for (i = 0, map = dt->classes; i < dt->num_classes; i++, map++) {
idx = match_string(map->class_names, map->length, class_string);
if (idx >= 0) {
*class_id = idx + map->base;
+ vpr_dt_info(dt, "good-class: %s.%s ", map->mod_name, class_string);
return map;
}
}
+ for (i = 0, cli = dt->class_users; i < dt->num_class_users; i++, cli++) {
+ idx = match_string(cli->map->class_names, cli->map->length, class_string);
+ if (idx >= 0) {
+ *class_id = idx + cli->map->base;
+ vpr_dt_info(dt, "class-ref: %s.%s ",
+ cli->user_mod_name, class_string);
+ return cli->map;
+ }
+ }
*class_id = -ENOENT;
return NULL;
}
@@ -554,7 +572,7 @@ static int ddebug_exec_query(char *query_string, const char *modname)
/* handle multiple queries in query string, continue on error, return
last error or number of matching callsites. Module name is either
- in param (for boot arg) or perhaps in query string.
+ in the modname arg (for boot args) or perhaps in query string.
*/
static int ddebug_exec_queries(char *query, const char *modname)
{
@@ -683,12 +701,12 @@ static int param_set_dyndbg_module_classes(const char *instr,
return 0;
}
/**
- * param_set_dyndbg_classes - class FOO >control
+ * param_set_dyndbg_classes - set all classes in a classmap
* @instr: string echo>d to sysfs, input depends on map_type
- * @kp: kp->arg has state: bits/lvl, map, map_type
+ * @kp: kp->arg has state: bits/lvl, classmap, map_type
*
- * Enable/disable prdbgs by their class, as given in the arguments to
- * DECLARE_DYNDBG_CLASSMAP. For LEVEL map-types, enforce relative
+ * For all classes in the classmap, enable/disable them per the input
+ * (depending on map_type). For LEVEL map-types, enforce relative
* levels by bitpos.
*
* Returns: 0 or <0 if error.
@@ -1030,12 +1048,17 @@ static void *ddebug_proc_next(struct seq_file *m, void *p, loff_t *pos)
static const char *ddebug_class_name(struct ddebug_table *dt, struct _ddebug *dp)
{
struct ddebug_class_map *map = dt->classes;
+ struct ddebug_class_user *cli = dt->class_users;
int i;
for (i = 0; i < dt->num_classes; i++, map++)
if (class_in_range(dp->class_id, map))
return map->class_names[dp->class_id - map->base];
+ for (i = 0; i < dt->num_class_users; i++, cli++)
+ if (class_in_range(dp->class_id, cli->map))
+ return cli->map->class_names[dp->class_id - cli->map->base];
+
return NULL;
}
@@ -1116,31 +1139,128 @@ static const struct proc_ops proc_fops = {
.proc_write = ddebug_proc_write
};
+static const char* ddebug_classmap_typenames[] = {
+ "DISJOINT_BITS", "LEVEL_NUM", "DISJOINT_NAMES", "LEVEL_NAMES"
+};
+
+#define vpr_cm_info(cm, _msg, ...) \
+ v2pr_info(_msg " module:%s base:%d len:%d type:%s\n", ##__VA_ARGS__, \
+ cm->mod_name, cm->base, cm->length, ddebug_classmap_typenames[cm->map_type])
+
+static void ddebug_sync_classbits(const struct ddebug_class_param *dcp, const char *modname)
+{
+ /* clamp initial bitvec, mask off hi-bits */
+ if (*dcp->bits & ~CLASSMAP_BITMASK(dcp->map->length)) {
+ *dcp->bits &= CLASSMAP_BITMASK(dcp->map->length);
+ v2pr_info("preset classbits: %lx\n", *dcp->bits);
+ }
+ /* force class'd prdbgs (in USEr module) to match (DEFINEr module) class-param */
+ ddebug_apply_class_bitmap(dcp, dcp->bits, ~0, modname);
+ ddebug_apply_class_bitmap(dcp, dcp->bits, 0, modname);
+}
+
+static void ddebug_match_apply_kparam(const struct kernel_param *kp, const struct ddebug_class_map *map, const char *modnm)
+{
+ struct ddebug_class_param *dcp;
+
+ if (kp->ops != ¶m_ops_dyndbg_classes)
+ return;
+
+ dcp = (struct ddebug_class_param *)kp->arg;
+
+ if (map == dcp->map) {
+ v2pr_info("found kp:%s =0x%lx", kp->name, *dcp->bits);
+ vpr_cm_info(map, "mapped to:");
+ ddebug_sync_classbits(dcp, modnm);
+ }
+}
+
+static void ddebug_apply_params(const struct ddebug_class_map *cm, const char *modnm)
+{
+ const struct kernel_param *kp;
+#if IS_ENABLED(CONFIG_MODULES)
+ int i;
+
+ if (cm->mod) {
+ vpr_cm_info(cm, "loaded class:");
+ for (i = 0, kp = cm->mod->kp; i < cm->mod->num_kp; i++, kp++)
+ ddebug_match_apply_kparam(kp, cm, modnm);
+ }
+#endif
+ if (!cm->mod) {
+ vpr_cm_info(cm, "builtin class:");
+ for (kp = __start___param; kp < __stop___param; kp++)
+ ddebug_match_apply_kparam(kp, cm, modnm);
+ }
+}
+
+/*
+ * Find this module's classmaps in a sub/whole-range of the builtin/
+ * modular classmap vector/section. Save the start and length of the
+ * subrange at its edges.
+ */
static void ddebug_attach_module_classes(struct ddebug_table *dt, struct _ddebug_info *di)
{
struct ddebug_class_map *cm;
int i, nc = 0;
- /*
- * Find this module's classmaps in a subrange/wholerange of
- * the builtin/modular classmap vector/section. Save the start
- * and length of the subrange at its edges.
- */
- for (cm = di->classes, i = 0; i < di->num_classes; i++, cm++) {
+ for (i = 0, cm = di->classes; i < di->num_classes; i++, cm++) {
if (!strcmp(cm->mod_name, dt->mod_name)) {
- if (!nc) {
- v2pr_info("start subrange, class[%d]: module:%s base:%d len:%d ty:%d\n",
- i, cm->mod_name, cm->base, cm->length, cm->map_type);
+
+ v2pr_info("classes[%d]: module:%s base:%d len:%d ty:%d\n", i,
+ cm->mod_name, cm->base, cm->length, cm->map_type);
+
+ if (!nc++) {
dt->classes = cm;
}
- nc++;
}
}
- if (nc) {
- dt->num_classes = nc;
+ dt->num_classes = nc;
+ if (nc)
vpr_info("module:%s attached %d classes\n", dt->mod_name, nc);
+
+ /* now iterate dt */
+ for (i = 0, cm = dt->classes; i < dt->num_classes; i++, cm++)
+ ddebug_apply_params(cm, cm->mod_name);
+}
+
+/*
+ * propagates class-params thru their classmaps to class-users. this
+ * means a query against the dt/module, which means it must be on the
+ * list to be seen by ddebug_change.
+ */
+static void ddebug_attach_client_module_classes(struct ddebug_table *dt, const struct _ddebug_info *di)
+{
+ struct ddebug_class_user *cli;
+ int i, nc = 0;
+
+ /*
+ * For builtins: scan the array, find start/length of this
+ * module's refs, save to dt. For loadables, this is the
+ * whole array.
+ */
+ for (i = 0, cli = di->class_users; i < di->num_class_users; i++, cli++) {
+
+ if (WARN_ON(!cli || !cli->map || !cli->user_mod_name))
+ continue;
+
+ if (!strcmp(cli->user_mod_name, dt->mod_name)) {
+
+ v2pr_info("class_ref[%d] %s -> %s\n", i,
+ cli->user_mod_name, cli->map->mod_name);
+
+ if (!nc++)
+ dt->class_users = cli;
+ }
}
+ dt->num_class_users = nc;
+
+ /* now iterate dt */
+ for (i = 0, cli = dt->class_users; i < dt->num_class_users; i++, cli++)
+ ddebug_apply_params(cli->map, cli->user_mod_name);
+
+ vpr_dt_info(dt, "attach-client-module: ");
}
/*
@@ -1151,7 +1271,8 @@ static int ddebug_add_module(struct _ddebug_info *di, const char *modname)
{
struct ddebug_table *dt;
- v3pr_info("add-module: %s.%d sites\n", modname, di->num_descs);
+ v3pr_info("add-module: %s %d sites %d.%d\n", modname, di->num_descs,
+ di->num_classes, di->num_class_users);
if (!di->num_descs) {
v3pr_info(" skip %s\n", modname);
return 0;
@@ -1174,13 +1295,16 @@ static int ddebug_add_module(struct _ddebug_info *di, const char *modname)
INIT_LIST_HEAD(&dt->link);
- if (di->classes && di->num_classes)
- ddebug_attach_module_classes(dt, di);
-
mutex_lock(&ddebug_lock);
list_add_tail(&dt->link, &ddebug_tables);
mutex_unlock(&ddebug_lock);
+ if (di->num_classes)
+ ddebug_attach_module_classes(dt, di);
+
+ if (di->num_class_users)
+ ddebug_attach_client_module_classes(dt, di);
+
vpr_info("%3u debug prints in module %s\n", di->num_descs, modname);
return 0;
}
@@ -1330,8 +1454,10 @@ static int __init dynamic_debug_init(void)
struct _ddebug_info di = {
.descs = __start___dyndbg,
.classes = __start___dyndbg_classes,
+ .class_users = __start___dyndbg_class_users,
.num_descs = __stop___dyndbg - __start___dyndbg,
.num_classes = __stop___dyndbg_classes - __start___dyndbg_classes,
+ .num_class_users = __stop___dyndbg_class_users - __start___dyndbg_class_users,
};
#ifdef CONFIG_MODULES
@@ -6,11 +6,15 @@
* Jim Cromie <jim.cromie@gmail.com>
*/
-#define pr_fmt(fmt) "test_dd: " fmt
+#if defined(TEST_DYNAMIC_DEBUG_SUBMOD)
+ #define pr_fmt(fmt) "test_dd_submod: " fmt
+#else
+ #define pr_fmt(fmt) "test_dd: " fmt
+#endif
#include <linux/module.h>
-/* run tests by reading or writing sysfs node: do_prints */
+/* re-gen output by reading or writing sysfs node: do_prints */
static void do_prints(void); /* device under test */
static int param_set_do_prints(const char *instr, const struct kernel_param *kp)
@@ -29,24 +33,39 @@ static const struct kernel_param_ops param_ops_do_prints = {
};
module_param_cb(do_prints, ¶m_ops_do_prints, NULL, 0600);
-/*
- * Using the CLASSMAP api:
- * - classmaps must have corresponding enum
- * - enum symbols must match/correlate with class-name strings in the map.
- * - base must equal enum's 1st value
- * - multiple maps must set their base to share the 0-30 class_id space !!
- * (build-bug-on tips welcome)
- * Additionally, here:
- * - tie together sysname, mapname, bitsname, flagsname
- */
-#define DD_SYS_WRAP(_model, _flags) \
- static unsigned long bits_##_model; \
- static struct ddebug_class_param _flags##_model = { \
+#define CLASSMAP_BITMASK(width, base) (((1UL << (width)) - 1) << base)
+
+/* sysfs param wrapper, proto-API */
+#define DYNDBG_CLASSMAP_PARAM_(_model, _flags, _init) \
+ static unsigned long bits_##_model = _init; \
+ static struct ddebug_class_param _flags##_##_model = { \
.bits = &bits_##_model, \
.flags = #_flags, \
.map = &map_##_model, \
}; \
- module_param_cb(_flags##_##_model, ¶m_ops_dyndbg_classes, &_flags##_model, 0600)
+ module_param_cb(_flags##_##_model, ¶m_ops_dyndbg_classes, \
+ &_flags##_##_model, 0600)
+#ifdef DEBUG
+#define DYNDBG_CLASSMAP_PARAM(_model, _flags) DYNDBG_CLASSMAP_PARAM_(_model, _flags, ~0)
+#else
+#define DYNDBG_CLASSMAP_PARAM(_model, _flags) DYNDBG_CLASSMAP_PARAM_(_model, _flags, 0)
+#endif
+
+/*
+ * Demonstrate/test all 4 class-typed classmaps with a sys-param.
+ *
+ * Each is 3 part: client-enum decl, _DEFINE, _PARAM.
+ * Declare them in blocks to show patterns of use (repetitions and
+ * changes) within each.
+ *
+ * 1st, dyndbg expects a client-provided enum-type as source of
+ * category/classid truth. DRM has DRM_UT_<CORE,DRIVER,KMS,etc>.
+ *
+ * Modules with multiple CLASSMAPS must have enums with distinct
+ * value-ranges, arranged below with explicit enum_sym = X inits.
+ *
+ * Declare all 4 enums now, for different types
+ */
/* numeric input, independent bits */
enum cat_disjoint_bits {
@@ -60,40 +79,57 @@ enum cat_disjoint_bits {
D2_LEASE,
D2_DP,
D2_DRMRES };
-DECLARE_DYNDBG_CLASSMAP(map_disjoint_bits, DD_CLASS_TYPE_DISJOINT_BITS, 0,
- "D2_CORE",
- "D2_DRIVER",
- "D2_KMS",
- "D2_PRIME",
- "D2_ATOMIC",
- "D2_VBL",
- "D2_STATE",
- "D2_LEASE",
- "D2_DP",
- "D2_DRMRES");
-DD_SYS_WRAP(disjoint_bits, p);
-DD_SYS_WRAP(disjoint_bits, T);
-
-/* symbolic input, independent bits */
-enum cat_disjoint_names { LOW = 10, MID, HI };
-DECLARE_DYNDBG_CLASSMAP(map_disjoint_names, DD_CLASS_TYPE_DISJOINT_NAMES, 10,
- "LOW", "MID", "HI");
-DD_SYS_WRAP(disjoint_names, p);
-DD_SYS_WRAP(disjoint_names, T);
/* numeric verbosity, V2 > V1 related */
enum cat_level_num { V0 = 14, V1, V2, V3, V4, V5, V6, V7 };
-DECLARE_DYNDBG_CLASSMAP(map_level_num, DD_CLASS_TYPE_LEVEL_NUM, 14,
- "V0", "V1", "V2", "V3", "V4", "V5", "V6", "V7");
-DD_SYS_WRAP(level_num, p);
-DD_SYS_WRAP(level_num, T);
-/* symbolic verbosity */
+/* named-symbolic input, independent bits */
+enum cat_disjoint_names { LOW = 10, MID, HI };
+
+/* named-symbolic verbosity */
enum cat_level_names { L0 = 22, L1, L2, L3, L4, L5, L6, L7 };
-DECLARE_DYNDBG_CLASSMAP(map_level_names, DD_CLASS_TYPE_LEVEL_NAMES, 22,
- "L0", "L1", "L2", "L3", "L4", "L5", "L6", "L7");
-DD_SYS_WRAP(level_names, p);
-DD_SYS_WRAP(level_names, T);
+
+/* recapitulate DRM's parent(drm.ko) <-- _submod(drivers,helpers) */
+#if !defined(TEST_DYNAMIC_DEBUG_SUBMOD)
+/*
+ * In single user, or parent / coordinator (drm.ko) modules, define
+ * classmaps on the client enums above, and then declares the PARAMS
+ * ref'g the classmaps. Each is exported.
+ */
+DYNDBG_CLASSMAP_DEFINE(map_disjoint_bits, DD_CLASS_TYPE_DISJOINT_BITS,
+ D2_CORE,
+ "D2_CORE",
+ "D2_DRIVER",
+ "D2_KMS",
+ "D2_PRIME",
+ "D2_ATOMIC",
+ "D2_VBL",
+ "D2_STATE",
+ "D2_LEASE",
+ "D2_DP",
+ "D2_DRMRES");
+
+DYNDBG_CLASSMAP_DEFINE(map_level_num, DD_CLASS_TYPE_LEVEL_NUM,
+ V0, "V0", "V1", "V2", "V3", "V4", "V5", "V6", "V7");
+
+/*
+ * now add the sysfs-params
+ */
+
+DYNDBG_CLASSMAP_PARAM(disjoint_bits, p);
+DYNDBG_CLASSMAP_PARAM(level_num, p);
+
+#else /* TEST_DYNAMIC_DEBUG_SUBMOD */
+
+/*
+ * in submod/drm-drivers, use the classmaps defined in top/parent
+ * module above.
+ */
+
+DYNDBG_CLASSMAP_USE(map_disjoint_bits);
+DYNDBG_CLASSMAP_USE(map_level_num);
+
+#endif
/* stand-in for all pr_debug etc */
#define prdbg(SYM) __pr_debug_cls(SYM, #SYM " msg\n")
@@ -129,6 +165,7 @@ static void do_levels(void)
static void do_prints(void)
{
+ pr_debug("do_prints:\n");
do_cats();
do_levels();
}
new file mode 100644
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kernel module for testing dynamic_debug
+ *
+ * Authors:
+ * Jim Cromie <jim.cromie@gmail.com>
+ */
+
+#define TEST_DYNAMIC_DEBUG_SUBMOD
+#include "test_dynamic_debug.c"
DECLARE_DYNDBG_CLASSMAP() has a design error; it fails a basic K&R rule: "define once, refer many times". When DRM_USE_DYNAMIC_DEBUG=y, DECLARE_DYNDBG_CLASSMAP() is used across DRM core & drivers; they all repeat the same classmap-defn args, which must match for the modules to respond together when DRM.debug categories are enabled. Worse, it causes the CONFIG_DRM_USE_DYNAMIC_DEBUG=Y regression; 1st drm.ko loads, and dyndbg initializes its DRM.debug callsites, then a drm-driver loads, but too late - it missed the DRM.debug enablement. So replace it with 2 macros that make the distinction: DYNDBG_CLASSMAP_DEFINE - invoked once from core - drm.ko DYNDBG_CLASSMAP_USE - from all drm drivers and helpers. DYNDBG_CLASSMAP_DEFINE: based on DECLARE_DYNDBG_CLASSMAP, but now it drops the static on the constructed classmap variable, and exports it instead. DYNDBG_CLASSMAP_USE: then refers to the exported var by name: * used from drivers, helper-mods * lets us drop the repetitive "classname" args * fixes 2nd-defn problem * creates a ddebug_class_user record in new __dyndbg_class_refs section this allows ddebug_add_module(etal) to handle them per-module. The distinction, and the usage record, allows dyndbg to initialize the driver's DRM.debug callsites separately after it is modprobed. Since DRM now needs updates to use the new macros, it also gets 2 wrappers: DRM_CLASSMAP_DEFINE, DRM_CLASSMAP_USE which declutter the users by hiding the ifdef CONFIG_DRM_USE_DYNAMIC_DEBUG. To review, dyndbg's existing __dyndbg_classes[] section does: . catalogs the classmaps defined by the module (or builtin modules) . authorizes dyndbg to >control those class'd prdbgs for the module. . DYNDBG_CLASSMAP_DEFINE(and old one) creates classmaps in this section. This patch adds __dyndbg_class_users[] section: . catalogs uses/references to the classmap definitions. . authorizes dyndbg to >control those class'd prdbgs in ref'g module. . DYNDBG_CLASSMAP_USE() creates classmap-user records in this section. Now ddebug_add_module(etal) can handle classmap-uses like (and after) classmaps; when a dependent module is loaded, its parent's kernel params are scanned to find the param wired to dyndbg-param-ops, whose classmap matches the one ref'd by the client. To support this, a few data/header changes: . new struct ddebug_class_user contains: user-module-name, &classmap-defn it records drm-driver's use of a classmap in the section, allowing lookup struct ddebug_info gets 2 new fields to encapsulate the new section: class_users, num_class_users. set by dynamic_debug_init() for builtins. or by kernel/module/main:load_info() for loadable modules. vmlinux.lds.h: new BOUNDED_SECTION for __dyndbg_class_users dynamic_debug.c has changes in 2 areas: ddebug_add_module(), ddebug_change(). ddebug_add_module() previously called ddebug_attach_module_classes() to handle classmap DEFINEd by a module, now it also calls ddebug_attach_client_module_classes() to handle USEd classmaps. ddebug_attach_client_module_classes() scans the client module's class_users section, follows the refs to the parent's classmap, and calls ddebug_apply_params() on each. ddebug_apply_params(new fn): It scans module's/builtin kernel-params, calls ddebug_match_attach_kparam for each to find the params/sysfs-nodes which may be wired to a classmap. ddebug_match_apply_kparam(new fn): 1st, it tests the kernel-param.ops is dyndbg's; this guarantees that the attached arg is a struct ddebug_class_param, which has a ref to the param's state, and to the classmap defining the param's handling. 2nd, it requires that the classmap ref'd by the kparam is the one we're called for; modules can use many separate classmaps (as test_dynamic_debug does). Then apply the "parent" kparam's setting to the dependent module, using ddebug_apply_class_bitmap(). ddebug_change(and callees) also gets adjustments: ddebug_find_valid_class(): This does a search over the module's classmaps, looking for the class FOO echo'd to >control. So now it searches over __dyndbg_class_users[] after __dyndbg_classes[]. ddebug_class_name(): return class-names for defined AND used classes. test_dynamic_debug.c, test_dynamic_debug_submod.c: This (already) demonstrates the 2 types of classmaps & sysfs-params, following the 4-part recipe: 1. define an enum for the classmap: DRM.debug has DRM_UT_{CORE,KMS,...} multiple classes must share 0-62 classid space. 2. DYNDBG_CLASSMAP_DEFINE(.. DRM_UT_{CORE,KMS,...}) 3. DYNDBG_CLASSMAP_PARAM* (classmap) 4. DYNDBG_CLASSMAP_USE() by _submod only, skipping 2,3 Move all the enum declarations together, to better explain how they share the 0..62 class-id space available to a module (non-overlapping subranges). reorg macros 2,3 by name. This gives a tabular format, making it easy to see the pattern of repetition, and the points of change. And extend the test to replicate the 2-module (parent & dependent) scenario which caused the CONFIG_DRM_USE_DYNAMIC_DEBUG=y regression seen in drm & drivers. The _submod.c is a 2-line file: #define _SUBMOD, #include parent. This gives identical complements of prdbgs in parent & _submod, and thus identical print behavior when all of: >control, >params, and parent->_submod propagation are working correctly. It also puts all the parent/_submod declarations together in the same source, with the new ifdef _SUBMOD block invoking DYNDBG_CLASSMAP_USE for the 2 test-interfaces. I think this is clearer. DEBUG details: ``#define DEBUG`` in src enables all pr_debugs after it, including any class'd pr_debugs; its not necessarily all-or-nothing, unless its a one-file-module with DEBUG at the top. If a CLASSMAP_PARAM is defined on a classmap, its readback value cannot describe the set of enablements. The param is basically write-only; it cannot know if `echo $cmd >control` was done since. To know the exact pr-debug state with certainty, toggle to both: echo 0x3ff > /sys/module/drm/parameters/debug echo 0 > /sys/module/drm/parameters/debug Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Fixes: aad0214f3026 ("dyndbg: add DECLARE_DYNDBG_CLASSMAP macro") Fixes: f158936b60a7 ("drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.") Ref: bb2ff6c27bc9 ("drm: Disable dynamic debug as broken") Signed-off-by: Jim Cromie <jim.cromie@gmail.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 12 +- drivers/gpu/drm/display/drm_dp_helper.c | 12 +- drivers/gpu/drm/drm_crtc_helper.c | 12 +- drivers/gpu/drm/drm_print.c | 25 ++-- drivers/gpu/drm/i915/i915_params.c | 12 +- drivers/gpu/drm/nouveau/nouveau_drm.c | 12 +- include/asm-generic/vmlinux.lds.h | 1 + include/drm/drm_print.h | 10 +- include/linux/dynamic_debug.h | 53 ++++++-- kernel/module/main.c | 3 + lib/Makefile | 2 +- lib/dynamic_debug.c | 172 ++++++++++++++++++++---- lib/test_dynamic_debug.c | 127 ++++++++++------- lib/test_dynamic_debug_submod.c | 10 ++ 14 files changed, 314 insertions(+), 149 deletions(-) create mode 100644 lib/test_dynamic_debug_submod.c