@@ -1715,15 +1715,15 @@ static bool intel_dp_dsc_supports_format(struct intel_dp *intel_dp,
return drm_dp_dsc_sink_supports_format(intel_dp->dsc_dpcd, sink_dsc_format);
}
-static bool is_bw_sufficient_for_dsc_config(u16 compressed_bpp, u32 link_clock,
+static bool is_bw_sufficient_for_dsc_config(u16 compressed_bppx16, u32 link_clock,
u32 lane_count, u32 mode_clock,
enum intel_output_format output_format,
int timeslots)
{
u32 available_bw, required_bw;
- available_bw = (link_clock * lane_count * timeslots) / 8;
- required_bw = compressed_bpp * (intel_dp_mode_to_fec_clock(mode_clock));
+ available_bw = (link_clock * lane_count * timeslots * 16) / 8;
+ required_bw = compressed_bppx16 * (intel_dp_mode_to_fec_clock(mode_clock));
return available_bw > required_bw;
}
@@ -1731,7 +1731,7 @@ static bool is_bw_sufficient_for_dsc_config(u16 compressed_bpp, u32 link_clock,
static int dsc_compute_link_config(struct intel_dp *intel_dp,
struct intel_crtc_state *pipe_config,
struct link_config_limits *limits,
- u16 compressed_bpp,
+ u16 compressed_bppx16,
int timeslots)
{
const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
@@ -1746,7 +1746,8 @@ static int dsc_compute_link_config(struct intel_dp *intel_dp,
for (lane_count = limits->min_lane_count;
lane_count <= limits->max_lane_count;
lane_count <<= 1) {
- if (!is_bw_sufficient_for_dsc_config(compressed_bpp, link_rate, lane_count,
+
+ if (!is_bw_sufficient_for_dsc_config(compressed_bppx16, link_rate, lane_count,
adjusted_mode->clock,
pipe_config->output_format,
timeslots))
@@ -1860,7 +1861,7 @@ icl_dsc_compute_link_config(struct intel_dp *intel_dp,
ret = dsc_compute_link_config(intel_dp,
pipe_config,
limits,
- valid_dsc_bpp[i],
+ valid_dsc_bpp[i] << 4,
timeslots);
if (ret == 0) {
pipe_config->dsc.compressed_bpp = valid_dsc_bpp[i];
@@ -1886,22 +1887,31 @@ xelpd_dsc_compute_link_config(struct intel_dp *intel_dp,
int pipe_bpp,
int timeslots)
{
- u16 compressed_bpp;
+ u8 bppx16_incr = drm_dp_dsc_sink_bpp_incr(intel_dp->dsc_dpcd);
+ struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+ u16 compressed_bppx16;
+ u8 bppx16_step;
int ret;
+ if (DISPLAY_VER(i915) < 14 || bppx16_incr <= 1)
+ bppx16_step = 16;
+ else
+ bppx16_step = 16 / bppx16_incr;
+
/* Compressed BPP should be less than the Input DSC bpp */
- dsc_max_bpp = min(dsc_max_bpp, pipe_bpp - 1);
+ dsc_max_bpp = min(dsc_max_bpp << 4, (pipe_bpp << 4) - bppx16_step);
+ dsc_min_bpp = dsc_min_bpp << 4;
- for (compressed_bpp = dsc_max_bpp;
- compressed_bpp >= dsc_min_bpp;
- compressed_bpp--) {
+ for (compressed_bppx16 = dsc_max_bpp;
+ compressed_bppx16 >= dsc_min_bpp;
+ compressed_bppx16 -= bppx16_step) {
ret = dsc_compute_link_config(intel_dp,
pipe_config,
limits,
- compressed_bpp,
+ compressed_bppx16,
timeslots);
if (ret == 0) {
- pipe_config->dsc.compressed_bpp = compressed_bpp << 4;
+ pipe_config->dsc.compressed_bpp = compressed_bppx16;
return 0;
}
}
This patch adds support to iterate over compressed output bpp as per the fractional step, supported by DP sink. v2: -Avoid ending up with compressed bpp, same as pipe bpp. (Stan) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> --- drivers/gpu/drm/i915/display/intel_dp.c | 36 ++++++++++++++++--------- 1 file changed, 23 insertions(+), 13 deletions(-)