diff mbox series

[5/5] drm/i915/vrr/xe2lpd: Use VRR timing generator whenever panel supports VRR

Message ID 20240603130319.1594872-6-ankit.k.nautiyal@intel.com (mailing list archive)
State New
Headers show
Series Use VRR timing generator for fixed refresh rate modes | expand

Commit Message

Nautiyal, Ankit K June 3, 2024, 1:03 p.m. UTC 
Currently VRR timing generator is used only when VRR is enabled by
userspace. From XE2LPD, gradually move away from older timing
generator and use VRR timing generator if panel supports VRR but
VRR is not enabled by the userspace.
In such a case, Flipline VMin and VMax all are set to the Vtotal of the
mode, which effectively makes the VRR timing generator work in
fixed refresh rate mode.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
---
 drivers/gpu/drm/i915/display/intel_vrr.c | 47 +++++++++++++++---------
 1 file changed, 30 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c
index 406838df2d7a..5d281f3c9fe4 100644
--- a/drivers/gpu/drm/i915/display/intel_vrr.c
+++ b/drivers/gpu/drm/i915/display/intel_vrr.c
@@ -137,26 +137,39 @@  intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
 	if (HAS_LRR(i915))
 		crtc_state->update_lrr = true;
 
-	vmin = DIV_ROUND_UP(adjusted_mode->crtc_clock * 1000,
-			    adjusted_mode->crtc_htotal * info->monitor_range.max_vfreq);
-	vmax = adjusted_mode->crtc_clock * 1000 /
-		(adjusted_mode->crtc_htotal * info->monitor_range.min_vfreq);
+	if (!crtc_state->uapi.vrr_enabled && DISPLAY_VER(i915) >= 20) {
+		/*
+		 * for LNL+ if panel supports VRR and user has not set VRR,
+		 * always go for fixed average Vtotal mode.
+		 */
+		crtc_state->vrr.vmin = adjusted_mode->crtc_vtotal;
+		crtc_state->vrr.vmax = adjusted_mode->crtc_vtotal;
+		crtc_state->vrr.flipline = adjusted_mode->crtc_vtotal;
+		crtc_state->vrr.fixed_rr = true;
+	} else {
 
-	vmin = max_t(int, vmin, adjusted_mode->crtc_vtotal);
-	vmax = max_t(int, vmax, adjusted_mode->crtc_vtotal);
+		vmin = DIV_ROUND_UP(adjusted_mode->crtc_clock * 1000,
+				    adjusted_mode->crtc_htotal * info->monitor_range.max_vfreq);
+		vmax = adjusted_mode->crtc_clock * 1000 /
+			(adjusted_mode->crtc_htotal * info->monitor_range.min_vfreq);
 
-	if (vmin >= vmax)
-		return;
+		vmin = max_t(int, vmin, adjusted_mode->crtc_vtotal);
+		vmax = max_t(int, vmax, adjusted_mode->crtc_vtotal);
 
-	/*
-	 * flipline determines the min vblank length the hardware will
-	 * generate, and flipline>=vmin+1, hence we reduce vmin by one
-	 * to make sure we can get the actual min vblank length.
-	 */
-	crtc_state->vrr.vmin = vmin - 1;
-	crtc_state->vrr.vmax = vmax;
+		if (vmin >= vmax)
+			return;
+
+		/*
+		 * flipline determines the min vblank length the hardware will
+		 * generate, and flipline>=vmin+1, hence we reduce vmin by one
+		 * to make sure we can get the actual min vblank length.
+		 */
+		crtc_state->vrr.vmin = vmin - 1;
+		crtc_state->vrr.vmax = vmax;
 
-	crtc_state->vrr.flipline = crtc_state->vrr.vmin + 1;
+		crtc_state->vrr.flipline = crtc_state->vrr.vmin + 1;
+		crtc_state->vrr.fixed_rr = false;
+	}
 
 	/*
 	 * For XE_LPD+, we use guardband and pipeline override
@@ -171,7 +184,7 @@  intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
 			    crtc_state->framestart_delay - 1);
 	}
 
-	if (crtc_state->uapi.vrr_enabled) {
+	if (crtc_state->uapi.vrr_enabled || crtc_state->vrr.fixed_rr) {
 		crtc_state->vrr.enable = true;
 		crtc_state->mode_flags |= I915_MODE_FLAG_VRR;
 		if (intel_dp_as_sdp_supported(intel_dp)) {