diff mbox series

[2/2] drm/i915/display: Call panel_fitting from pipe_config

Message ID 20240805062538.1844291-3-nemesa.garg@intel.com (mailing list archive)
State New, archived
Headers show
Series Consider joiner calculation for panel fitting | expand

Commit Message

Nemesa Garg Aug. 5, 2024, 6:25 a.m. UTC
In panel fitter/pipe scaler scenario the pch_pfit configuration
currently takes place before accounting for pipe_src width for
joiner. This causes issue when pch_pfit and joiner get enabled
together.

Introduce a new boolean flag is_required which can be filled
during dp compute_config and later is used to compute panel_fitting in
pipe_config. Modify pch_panel_fitting to handle joiner pipes by adjusting
crtc_hdisplay accordingly.

Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c       | 11 +++++++++++
 drivers/gpu/drm/i915/display/intel_display_types.h |  1 +
 drivers/gpu/drm/i915/display/intel_dp.c            | 11 ++++++++---
 drivers/gpu/drm/i915/display/intel_panel.c         |  3 +++
 4 files changed, 23 insertions(+), 3 deletions(-)

Comments

Ankit Nautiyal Aug. 6, 2024, 3:35 a.m. UTC | #1
On 8/5/2024 11:55 AM, Nemesa Garg wrote:
> In panel fitter/pipe scaler scenario the pch_pfit configuration
> currently takes place before accounting for pipe_src width for
> joiner. This causes issue when pch_pfit and joiner get enabled
> together.
>
> Introduce a new boolean flag is_required which can be filled
> during dp compute_config and later is used to compute panel_fitting in
> pipe_config.

This is now only being done when joiner is required. For no-joiner case, 
the flow remains same.


> Modify pch_panel_fitting to handle joiner pipes by adjusting
> crtc_hdisplay accordingly.

Lets maintain version history of the patch.


>
> Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
> ---
>   drivers/gpu/drm/i915/display/intel_display.c       | 11 +++++++++++
>   drivers/gpu/drm/i915/display/intel_display_types.h |  1 +
>   drivers/gpu/drm/i915/display/intel_dp.c            | 11 ++++++++---
>   drivers/gpu/drm/i915/display/intel_panel.c         |  3 +++
>   4 files changed, 23 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 8bbde03f2508..a7194a84b6b8 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -4796,6 +4796,17 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
>   		return ret;
>   	}
>   
> +	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
> +		if (connector_state->crtc != &crtc->base)
> +			continue;
> +
> +		if (crtc_state->pch_pfit.is_required) {
> +			ret = intel_panel_fitting(crtc_state, connector_state);
> +			if (ret)
> +				return ret;
> +		}
> +	}
> +
>   	/* Dithering seems to not pass-through bits correctly when it should, so
>   	 * only enable it on 6bpc panels and when its not a compliance
>   	 * test requesting 6bpc video pattern.
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index a04d52dbf6e1..a4ab26d8fa43 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1258,6 +1258,7 @@ struct intel_crtc_state {
>   		struct drm_rect dst;
>   		bool enabled;
>   		bool force_thru;
> +		bool is_required;

I think this flag is now very specific to joiner case so need to have a 
better name to reflect the same.


>   	} pch_pfit;
>   
>   	/* FDI configuration, only valid if has_pch_encoder is set. */
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 65182bf69b62..4b707d029206 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2953,9 +2953,14 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>   
>   	if ((intel_dp_is_edp(intel_dp) && fixed_mode) ||
>   	    pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
> -		ret = intel_panel_fitting(pipe_config, conn_state);
> -		if (ret)
> -			return ret;
> +		if (!pipe_config->joiner_pipes) {
> +			ret = intel_panel_fitting(pipe_config, conn_state);
> +			if (ret)
> +				return ret;
> +		} else {
> +			 /* Incase of bigjoiner panel_fitting is handled during pipe_config */

This can be just joiner.


Regards,

Ankit


> +			pipe_config->pch_pfit.is_required = true;
> +		}
>   	}
>   
>   	pipe_config->limited_color_range =
> diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c
> index dd18136d1c61..0da45c2330d3 100644
> --- a/drivers/gpu/drm/i915/display/intel_panel.c
> +++ b/drivers/gpu/drm/i915/display/intel_panel.c
> @@ -395,6 +395,9 @@ static int pch_panel_fitting(struct intel_crtc_state *crtc_state,
>   	u16 crtc_hdisplay = adjusted_mode->crtc_hdisplay;
>   	u16 crtc_vdisplay = adjusted_mode->crtc_vdisplay;
>   
> +	if (crtc_state->joiner_pipes)
> +		crtc_hdisplay = adjusted_mode->crtc_hdisplay / 2;
> +
>   	/* Native modes don't need fitting */
>   	if (crtc_hdisplay == pipe_src_w &&
>   	    crtc_vdisplay == pipe_src_h &&
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 8bbde03f2508..a7194a84b6b8 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -4796,6 +4796,17 @@  intel_modeset_pipe_config(struct intel_atomic_state *state,
 		return ret;
 	}
 
+	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
+		if (connector_state->crtc != &crtc->base)
+			continue;
+
+		if (crtc_state->pch_pfit.is_required) {
+			ret = intel_panel_fitting(crtc_state, connector_state);
+			if (ret)
+				return ret;
+		}
+	}
+
 	/* Dithering seems to not pass-through bits correctly when it should, so
 	 * only enable it on 6bpc panels and when its not a compliance
 	 * test requesting 6bpc video pattern.
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index a04d52dbf6e1..a4ab26d8fa43 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -1258,6 +1258,7 @@  struct intel_crtc_state {
 		struct drm_rect dst;
 		bool enabled;
 		bool force_thru;
+		bool is_required;
 	} pch_pfit;
 
 	/* FDI configuration, only valid if has_pch_encoder is set. */
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 65182bf69b62..4b707d029206 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2953,9 +2953,14 @@  intel_dp_compute_config(struct intel_encoder *encoder,
 
 	if ((intel_dp_is_edp(intel_dp) && fixed_mode) ||
 	    pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
-		ret = intel_panel_fitting(pipe_config, conn_state);
-		if (ret)
-			return ret;
+		if (!pipe_config->joiner_pipes) {
+			ret = intel_panel_fitting(pipe_config, conn_state);
+			if (ret)
+				return ret;
+		} else {
+			 /* Incase of bigjoiner panel_fitting is handled during pipe_config */
+			pipe_config->pch_pfit.is_required = true;
+		}
 	}
 
 	pipe_config->limited_color_range =
diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c
index dd18136d1c61..0da45c2330d3 100644
--- a/drivers/gpu/drm/i915/display/intel_panel.c
+++ b/drivers/gpu/drm/i915/display/intel_panel.c
@@ -395,6 +395,9 @@  static int pch_panel_fitting(struct intel_crtc_state *crtc_state,
 	u16 crtc_hdisplay = adjusted_mode->crtc_hdisplay;
 	u16 crtc_vdisplay = adjusted_mode->crtc_vdisplay;
 
+	if (crtc_state->joiner_pipes)
+		crtc_hdisplay = adjusted_mode->crtc_hdisplay / 2;
+
 	/* Native modes don't need fitting */
 	if (crtc_hdisplay == pipe_src_w &&
 	    crtc_vdisplay == pipe_src_h &&