[3/3] drm/i915/dp: Extract intel_edp_set_sink_rates()

Commit Message

Ville Syrjälä Sept. 18, 2024, 7:04 p.m. UTC

From: Ville Syrjälä <[e-mail]>

Declutter intel_edp_init_dpcd() a bit by extracting the sink
rates probing into its own function.

Signed-off-by: Ville Syrjälä <[e-mail]>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 76 +++++++++++++------------
 1 file changed, 40 insertions(+), 36 deletions(-)

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 6a1b0e93a1fc..ae3f242fa925 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -4066,6 +4066,45 @@  static void intel_edp_mso_init(struct intel_dp *intel_dp)
 	intel_dp->mso_pixel_overlap = mso ? info->mso_pixel_overlap : 0;
 }
 
+static void
+intel_edp_set_sink_rates(struct intel_dp *intel_dp)
+{
+	intel_dp->num_sink_rates = 0;
+
+	if (intel_dp->edp_dpcd[0] >= DP_EDP_14) {
+		__le16 sink_rates[DP_MAX_SUPPORTED_RATES];
+		int i;
+
+		drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES,
+				 sink_rates, sizeof(sink_rates));
+
+		for (i = 0; i < ARRAY_SIZE(sink_rates); i++) {
+			int val = le16_to_cpu(sink_rates[i]);
+
+			if (val == 0)
+				break;
+
+			/* Value read multiplied by 200kHz gives the per-lane
+			 * link rate in kHz. The source rates are, however,
+			 * stored in terms of LS_Clk kHz. The full conversion
+			 * back to symbols is
+			 * (val * 200kHz)*(8/10 ch. encoding)*(1/8 bit to Byte)
+			 */
+			intel_dp->sink_rates[i] = (val * 200) / 10;
+		}
+		intel_dp->num_sink_rates = i;
+	}
+
+	/*
+	 * Use DP_LINK_RATE_SET if DP_SUPPORTED_LINK_RATES are available,
+	 * default to DP_MAX_LINK_RATE and DP_LINK_BW_SET otherwise.
+	 */
+	if (intel_dp->num_sink_rates)
+		intel_dp->use_rate_select = true;
+	else
+		intel_dp_set_sink_rates(intel_dp);
+}
+
 static bool
 intel_edp_init_dpcd(struct intel_dp *intel_dp, struct intel_connector *connector)
 {
@@ -4110,42 +4149,7 @@  intel_edp_init_dpcd(struct intel_dp *intel_dp, struct intel_connector *connector
 	 */
 	intel_psr_init_dpcd(intel_dp);
 
-	/* Clear the default sink rates */
-	intel_dp->num_sink_rates = 0;
-
-	/* Read the eDP 1.4+ supported link rates. */
-	if (intel_dp->edp_dpcd[0] >= DP_EDP_14) {
-		__le16 sink_rates[DP_MAX_SUPPORTED_RATES];
-		int i;
-
-		drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES,
-				sink_rates, sizeof(sink_rates));
-
-		for (i = 0; i < ARRAY_SIZE(sink_rates); i++) {
-			int val = le16_to_cpu(sink_rates[i]);
-
-			if (val == 0)
-				break;
-
-			/* Value read multiplied by 200kHz gives the per-lane
-			 * link rate in kHz. The source rates are, however,
-			 * stored in terms of LS_Clk kHz. The full conversion
-			 * back to symbols is
-			 * (val * 200kHz)*(8/10 ch. encoding)*(1/8 bit to Byte)
-			 */
-			intel_dp->sink_rates[i] = (val * 200) / 10;
-		}
-		intel_dp->num_sink_rates = i;
-	}
-
-	/*
-	 * Use DP_LINK_RATE_SET if DP_SUPPORTED_LINK_RATES are available,
-	 * default to DP_MAX_LINK_RATE and DP_LINK_BW_SET otherwise.
-	 */
-	if (intel_dp->num_sink_rates)
-		intel_dp->use_rate_select = true;
-	else
-		intel_dp_set_sink_rates(intel_dp);
+	intel_edp_set_sink_rates(intel_dp);
 	intel_dp_set_max_sink_lane_count(intel_dp);
 
 	/* Read the eDP DSC DPCD registers */