@@ -110,8 +110,10 @@ static const u8 valid_dsc_bpp[] = {6, 8, 10, 12, 15};
/* With Single pipe configuration, HW is capable of supporting maximum
* of 4 slices per line.
+ * For higher resolutions where 12 slice support is required with
+ * ultrajoiner, only then each pipe can support 3 slices.
*/
-static const u8 valid_dsc_slicecount[] = {1, 2, 4};
+static const u8 valid_dsc_slicecount[] = {1, 2, 3, 4};
/**
* intel_dp_is_edp - is the given port attached to an eDP panel (either CPU or PCH)
@@ -1043,6 +1045,13 @@ u8 intel_dp_dsc_get_slice_count(const struct intel_connector *connector,
for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) {
u8 test_slice_count = valid_dsc_slicecount[i] * num_joined_pipes;
+ /*
+ * 3 DSC Slices per pipe need 3 DSC engines,
+ * which is supported only with Ultrajoiner.
+ */
+ if (valid_dsc_slicecount[i] == 3 && num_joined_pipes != 4)
+ continue;
+
if (test_slice_count >
drm_dp_dsc_sink_max_slice_count(connector->dp.dsc_dpcd, false))
break;
@@ -2463,8 +2472,13 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
* VDSC engine operates at 1 Pixel per clock, so if peak pixel rate
* is greater than the maximum Cdclock and if slice count is even
* then we need to use 2 VDSC instances.
+ * In case of Ultrajoiner along with 12 slices we need to use 3
+ * VDSC instances.
*/
- if (pipe_config->joiner_pipes || pipe_config->dsc.slice_count > 1)
+ if (pipe_config->joiner_pipes && num_joined_pipes == 4 &&
+ pipe_config->dsc.slice_count == 12)
+ pipe_config->dsc.dsc_split = INTEL_DSC_SPLIT_3_STREAMS;
+ else if (pipe_config->joiner_pipes || pipe_config->dsc.slice_count > 1)
pipe_config->dsc.dsc_split = INTEL_DSC_SPLIT_2_STREAMS;
ret = intel_dp_dsc_compute_params(connector, pipe_config);
Certain resolutions require 12 DSC slices support along with ultrajoiner. For such cases, the third VDSC Engine per Pipe is enabled. Each VDSC Engine processes 1 Slice, resulting in a total of 12 VDSC Instances (4 Pipes * 3 VDSC Instances per Pipe). Add support for 12 DSC slices and 3 VDSC engines for such modes. v2: Add missing check for 3 slices support only with 4 joined pipes. (Suraj) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> --- drivers/gpu/drm/i915/display/intel_dp.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)