@@ -83,6 +83,16 @@ void intel_casf_enable(struct intel_crtc_state *crtc_state)
intel_de_write_fw(display, GLK_PS_COEF_DATA_SET(crtc->pipe, id, 1),
tmp);
}
+
+ skl_scaler_setup_casf(crtc_state);
+}
+
+int intel_casf_compute_config(struct intel_crtc_state *crtc_state)
+{
+ if (!crtc_state->pch_pfit.enabled)
+ crtc_state->hw.casf_params.need_scaler = true;
+
+ return 0;
}
static void convert_sharpness_coef_binary(struct scaler_filter_coeff *coeff,
@@ -12,5 +12,6 @@ struct intel_crtc_state;
void intel_casf_enable(struct intel_crtc_state *crtc_state);
void intel_casf_scaler_compute_config(struct intel_crtc_state *crtc_state);
+int intel_casf_compute_config(struct intel_crtc_state *crtc_state);
#endif /* __INTEL_CASF_H__ */
@@ -2137,7 +2137,7 @@ static void get_crtc_power_domains(struct intel_crtc_state *crtc_state,
set_bit(POWER_DOMAIN_PIPE(pipe), mask->bits);
set_bit(POWER_DOMAIN_TRANSCODER(cpu_transcoder), mask->bits);
if (crtc_state->pch_pfit.enabled ||
- crtc_state->pch_pfit.force_thru)
+ crtc_state->pch_pfit.force_thru || crtc_state->hw.casf_params.need_scaler)
set_bit(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe), mask->bits);
drm_for_each_encoder_mask(encoder, &dev_priv->drm,
@@ -2386,7 +2386,7 @@ static u32 ilk_pipe_pixel_rate(const struct intel_crtc_state *crtc_state)
* PF-ID we'll need to adjust the pixel_rate here.
*/
- if (!crtc_state->pch_pfit.enabled)
+ if (!crtc_state->pch_pfit.enabled || crtc_state->hw.casf_params.need_scaler)
return pixel_rate;
drm_rect_init(&src, 0, 0,
@@ -4579,7 +4579,8 @@ static int intel_crtc_atomic_check(struct intel_atomic_state *state,
if (DISPLAY_VER(dev_priv) >= 9) {
if (intel_crtc_needs_modeset(crtc_state) ||
- intel_crtc_needs_fastset(crtc_state)) {
+ intel_crtc_needs_fastset(crtc_state) ||
+ crtc_state->hw.casf_params.need_scaler) {
ret = skl_update_scaler_crtc(crtc_state);
if (ret)
return ret;
@@ -5769,6 +5770,9 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
PIPE_CONF_CHECK_BOOL(cmrr.enable);
}
+ if (pipe_config->uapi.sharpness_strength > 0)
+ PIPE_CONF_CHECK_BOOL(hw.casf_params.need_scaler);
+
#undef PIPE_CONF_CHECK_X
#undef PIPE_CONF_CHECK_I
#undef PIPE_CONF_CHECK_LLI
@@ -180,9 +180,11 @@ verify_crtc_state(struct intel_atomic_state *state,
crtc->base.name);
hw_crtc_state->hw.enable = sw_crtc_state->hw.enable;
+ hw_crtc_state->hw.casf_params.need_scaler = sw_crtc_state->hw.casf_params.need_scaler;
intel_crtc_get_pipe_config(hw_crtc_state);
+ hw_crtc_state->scaler_state.scaler_id = sw_crtc_state->scaler_state.scaler_id;
/* we keep both pipes enabled on 830 */
if (IS_I830(i915) && hw_crtc_state->hw.active)
hw_crtc_state->hw.active = sw_crtc_state->hw.active;
@@ -183,6 +183,9 @@ static int pch_panel_fitting(struct intel_crtc_state *crtc_state,
struct intel_display *display = to_intel_display(crtc_state);
const struct drm_display_mode *adjusted_mode =
&crtc_state->hw.adjusted_mode;
+ struct intel_atomic_state *state = to_intel_atomic_state(conn_state->state);
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+ struct intel_crtc_state *old_crtc_state = intel_atomic_get_old_crtc_state(state, crtc);
int pipe_src_w = drm_rect_width(&crtc_state->pipe_src);
int pipe_src_h = drm_rect_height(&crtc_state->pipe_src);
int ret, x, y, width, height;
@@ -193,6 +196,9 @@ static int pch_panel_fitting(struct intel_crtc_state *crtc_state,
crtc_state->output_format != INTEL_OUTPUT_FORMAT_YCBCR420)
return 0;
+ if (old_crtc_state->hw.casf_params.need_scaler)
+ return -EINVAL;
+
switch (conn_state->scaling_mode) {
case DRM_MODE_SCALE_CENTER:
width = pipe_src_w;
@@ -97,7 +97,12 @@ static u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_cosited)
#define MTL_MAX_DST_H 8192
#define SKL_MIN_YUV_420_SRC_W 16
#define SKL_MIN_YUV_420_SRC_H 16
-
+#define SCALER_FILTER_SELECT \
+ (PS_FILTER_PROGRAMMED | \
+ PS_Y_VERT_FILTER_SELECT(1) | \
+ PS_Y_HORZ_FILTER_SELECT(0) | \
+ PS_UV_VERT_FILTER_SELECT(1) | \
+ PS_UV_HORZ_FILTER_SELECT(0))
static int
skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
unsigned int scaler_user, int *scaler_id,
@@ -253,7 +258,8 @@ int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state)
drm_rect_width(&crtc_state->pipe_src),
drm_rect_height(&crtc_state->pipe_src),
width, height, NULL, 0,
- crtc_state->pch_pfit.enabled);
+ crtc_state->pch_pfit.enabled ||
+ crtc_state->hw.casf_params.need_scaler);
}
/**
@@ -292,7 +298,9 @@ int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
}
static int intel_allocate_scaler(struct intel_crtc_scaler_state *scaler_state,
- struct intel_crtc *crtc)
+ struct intel_crtc *crtc,
+ struct intel_plane_state *plane_state,
+ bool casf_scaler)
{
int i;
@@ -300,6 +308,11 @@ static int intel_allocate_scaler(struct intel_crtc_scaler_state *scaler_state,
if (scaler_state->scalers[i].in_use)
continue;
+ if (!plane_state) {
+ if (casf_scaler && i != 1)
+ continue;
+ }
+
scaler_state->scalers[i].in_use = true;
return i;
@@ -312,19 +325,23 @@ static int intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_stat
int num_scalers_need, struct intel_crtc *crtc,
const char *name, int idx,
struct intel_plane_state *plane_state,
- int *scaler_id)
+ int *scaler_id, bool casf_scaler)
{
struct intel_display *display = to_intel_display(crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ struct intel_crtc_state *crtc_state = to_intel_crtc_state(crtc->base.state);
u32 mode;
if (*scaler_id < 0)
- *scaler_id = intel_allocate_scaler(scaler_state, crtc);
+ *scaler_id = intel_allocate_scaler(scaler_state, crtc, plane_state, casf_scaler);
if (drm_WARN(display->drm, *scaler_id < 0,
"Cannot find scaler for %s:%d\n", name, idx))
return -EINVAL;
+ if (crtc_state->hw.casf_params.need_scaler)
+ mode = SKL_PS_SCALER_MODE_HQ;
+
/* set scaler mode */
if (plane_state && plane_state->hw.fb &&
plane_state->hw.fb->format->is_yuv &&
@@ -443,7 +460,8 @@ static int setup_crtc_scaler(struct intel_atomic_state *state,
return intel_atomic_setup_scaler(scaler_state,
hweight32(scaler_state->scaler_users),
crtc, "CRTC", crtc->base.base.id,
- NULL, &scaler_state->scaler_id);
+ NULL, &scaler_state->scaler_id,
+ crtc_state->hw.casf_params.need_scaler);
}
static int setup_plane_scaler(struct intel_atomic_state *state,
@@ -478,7 +496,8 @@ static int setup_plane_scaler(struct intel_atomic_state *state,
return intel_atomic_setup_scaler(scaler_state,
hweight32(scaler_state->scaler_users),
crtc, "PLANE", plane->base.base.id,
- plane_state, &plane_state->scaler_id);
+ plane_state, &plane_state->scaler_id,
+ crtc_state->hw.casf_params.need_scaler);
}
/**
@@ -654,6 +673,44 @@ static void skl_scaler_setup_filter(struct intel_display *display, enum pipe pip
}
}
+void skl_scaler_setup_casf(struct intel_crtc_state *crtc_state)
+{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+ struct intel_display *display = to_intel_display(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &crtc_state->hw.adjusted_mode;
+ struct intel_crtc_scaler_state *scaler_state =
+ &crtc_state->scaler_state;
+ struct drm_rect src, dest;
+ int id, width, height;
+ int x, y;
+ enum pipe pipe = crtc->pipe;
+ u32 ps_ctrl;
+
+ width = adjusted_mode->crtc_hdisplay;
+ height = adjusted_mode->crtc_vdisplay;
+
+ x = y = 0;
+ drm_rect_init(&dest, x, y, width, height);
+
+ width = drm_rect_width(&dest);
+ height = drm_rect_height(&dest);
+ id = scaler_state->scaler_id;
+
+ drm_rect_init(&src, 0, 0,
+ drm_rect_width(&crtc_state->pipe_src) << 16,
+ drm_rect_height(&crtc_state->pipe_src) << 16);
+
+ ps_ctrl = PS_SCALER_EN | PS_BINDING_PIPE | scaler_state->scalers[id].mode |
+ PS_BYPASS_ARMING | PS_DB_STALL | SCALER_FILTER_SELECT;
+
+ intel_de_write_fw(display, SKL_PS_CTRL(pipe, id), ps_ctrl);
+ intel_de_write_fw(display, SKL_PS_WIN_POS(pipe, id),
+ PS_WIN_XPOS(x) | PS_WIN_YPOS(y));
+ intel_de_write_fw(display, SKL_PS_WIN_SZ(pipe, id),
+ PS_WIN_XSIZE(width) | PS_WIN_YSIZE(height));
+}
+
void skl_pfit_enable(const struct intel_crtc_state *crtc_state)
{
struct intel_display *display = to_intel_display(crtc_state);
@@ -824,16 +881,19 @@ void skl_scaler_get_config(struct intel_crtc_state *crtc_state)
continue;
id = i;
- crtc_state->pch_pfit.enabled = true;
+
+ if (!crtc_state->hw.casf_params.need_scaler)
+ crtc_state->pch_pfit.enabled = true;
pos = intel_de_read(display, SKL_PS_WIN_POS(crtc->pipe, i));
size = intel_de_read(display, SKL_PS_WIN_SZ(crtc->pipe, i));
- drm_rect_init(&crtc_state->pch_pfit.dst,
- REG_FIELD_GET(PS_WIN_XPOS_MASK, pos),
- REG_FIELD_GET(PS_WIN_YPOS_MASK, pos),
- REG_FIELD_GET(PS_WIN_XSIZE_MASK, size),
- REG_FIELD_GET(PS_WIN_YSIZE_MASK, size));
+ if (!crtc_state->hw.casf_params.need_scaler)
+ drm_rect_init(&crtc_state->pch_pfit.dst,
+ REG_FIELD_GET(PS_WIN_XPOS_MASK, pos),
+ REG_FIELD_GET(PS_WIN_YPOS_MASK, pos),
+ REG_FIELD_GET(PS_WIN_XSIZE_MASK, size),
+ REG_FIELD_GET(PS_WIN_YSIZE_MASK, size));
scaler_state->scalers[i].in_use = true;
break;
@@ -28,5 +28,6 @@ void skl_detach_scalers(const struct intel_crtc_state *crtc_state);
void skl_scaler_disable(const struct intel_crtc_state *old_crtc_state);
void skl_scaler_get_config(struct intel_crtc_state *crtc_state);
+void skl_scaler_setup_casf(struct intel_crtc_state *crtc_state);
#endif
As only second scaler can be used for sharpness check if it is available and also check if panel fitting is also not enabled, then set the sharpness. Panel fitting will have the preference over sharpness property. v2: Add the panel fitting check before enabling sharpness v3: Reframe commit message[Arun] v4: Replace string based comparison with plane_state[Jani] v5: Rebase v6: Fix build issue Signed-off-by: Nemesa Garg <nemesa.garg@intel.com> --- drivers/gpu/drm/i915/display/intel_casf.c | 10 +++ drivers/gpu/drm/i915/display/intel_casf.h | 1 + drivers/gpu/drm/i915/display/intel_display.c | 10 ++- .../drm/i915/display/intel_modeset_verify.c | 2 + drivers/gpu/drm/i915/display/intel_pfit.c | 6 ++ drivers/gpu/drm/i915/display/skl_scaler.c | 86 ++++++++++++++++--- drivers/gpu/drm/i915/display/skl_scaler.h | 1 + 7 files changed, 100 insertions(+), 16 deletions(-)